|
US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94047-2012: Sectional warping machine
Status: Valid FZ/T 94047: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 94047-2012 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Sectional warping machine
| Valid |
FZ/T 94047-2012
|
| FZ/T 94047-1999 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Sectional warping machine
| Obsolete |
FZ/T 94047-1999
|
PDF similar to FZ/T 94047-2012
Basic data | Standard ID | FZ/T 94047-2012 (FZ/T94047-2012) | | Description (Translated English) | Sectional warping machine | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W94 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 7,723 | | Older Standard (superseded by this standard) | FZ/T 94047-1999 | | Quoted Standard | GB 5226.1; GB/T 7111.6; GB/T 8461; GB/T 9239.1-2006; GB/T 17780; GB/T 20034; FZ/T 90001; FZ/T 90035; FZ/T 90074; FZ/T 90089.1; FZ/T 90089.2 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the section warping machine type, the main technical parameters, technical requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to cotton, wool, linen, silk, chemical fiber | FZ/T 94047-2012: Sectional warping machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sectional warping machine
ICS 59.120.30
W94
People's Republic of China textile industry standards
Replacing FZ/T 94047-1999
Sectional warping machine
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard FZ/T 94047-1999 "section warping machine."
This standard FZ/T 94047-1999 compared to the main changes are as follows.
--- Original standard 3.1.1 Replace the "Host Type. drum movement, its cone taper fabric according to requirements to determine";
--- Original standard 3.1.3 Replace the "creel types. rectangular frame, V-shaped frame, rectangular shaped -V double frame";
--- Original standard 3.2.1 Replace the "warp speed ≤1000m/min, stepless adjustable; beaming speed ≤200m/min, no
Level, adjustable ";
--- Original standard 3.2.3 Replace the "roller diameter. 500mm, 800mm, 1000mm";
--- Add "3.2.4 Adaptation weaving shaft with a flange maximum diameter. 1250mm";
--- Original content to standard 4.2 "warping noise emission sound pressure level ≤75dBA, noise emission sound pressure level ≤82dBA when beaming";
--- Original content to a standard 4.4 "warping, beaming to maintain constant linear speed of the winding, the maximum difference of ± 1%";
--- Original content to a standard 4.5 "warping, the difference between different cheese yarn unwinding tension. 20g or less, ± 2g; 20g ~
60g, ± 3g; 60g or more, ± 5g ";
--- Original content standard 4.8 changed to "roll runout before spraying ≤0.2mm, after spraying ≤0.4mm";
--- Original content to the standard 4.14 "random security devices should be complete. electrical and electronic equipment and control devices conform
GB 5226.1 provisions; mechanical safety in line with GB/T 17780 requirements ";
--- Increase "4.20 warping station guide roller runout ≤0.04mm";
--- Increase "4.21 warping length Comptroller error ≤0.2%";
--- Original content to the standard 5.7 "and 4.20 with a dial indicator to detect 4.8,4.11,4.12";
--- Increase 5.14.1 Test conditions "a) Width. 2300mm";
--- Increase "5.16 threading car parking 100m, with the meter stick measuring, testing 4.21."
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile machinery and accessories (SAC/TC215) centralized.
The fourth standard Jiangyin Textile Machinery Manufacturing Co., Ltd., Jiangyin Huafang New Technology Research Ltd., Shaoxing Dingfeng Textile device
Material Co., Ltd. is responsible for drafting.
The main drafters of this standard. Caoya Hong, Feng Xueliang, Liu Guoping, Wu Yihong, Fu Yu Zhong, Xu Shu, Zhou Zhijun, light Xia culture.
This standard replaces the standards previously issued as follows.
--- FZ/T 94047-1999.
Sectional warping machine
1 Scope
This standard specifies the type of sectional warping machines, the main technical parameters, technical requirements, test methods, inspection rules and signs, packaging, transportation
Transport and storage.
This standard applies to cotton, wool, linen, silk, chemical fiber and blended yarn warping with a sectional warping machine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements
GB/T 7111.6 Textile machinery - Noise test code - Part 6. Weaving Machinery
GB/T 8461 Textile machinery and accessories - Cone sectional warping machine Maximum effective width
GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. specification of tolerance and balance
test
GB/T 17780 Textile machinery - Safety requirements
GB/T 20034 Textile machinery and accessories - Main dimensions warp creel
FZ/T 90001 Textile machinery Packaging
FZ/T 90035 Textile machinery terminology warping axis and main dimensions
FZ/T 90074 textile machinery products Painting
FZ/T 90089.1 textile machinery nameplate types, sizes and technical requirements
FZ/T 90089.2 textile machinery nameplate content
3 Product type and main technical parameters
Type 3.1
3.1.1 Host Type. drum movement, which is determined according to taper cone fabric requirements.
3.1.2 beaming pattern. fixed and mobile.
3.1.3 creel types. rectangular frame, V-shaped frame, rectangular shaped -V duplex frame.
3.2 The main technical parameters
3.2.1 warping speed ≤1000m/min, stepless adjustable; beaming speed ≤200m/min, stepless adjustable.
3.2.2 Sectional warping machine maximum effective width in line with GB/T 8461.
3.2.3 Roller diameter. 500mm, 800mm, 1000mm.
3.2.4 Adaptation weaving shaft with a flange maximum diameter. 1250mm.
3.2.5 warping major axis dimensions conform FZ/T 90035.
3.2.6 creel main dimensions conform to GB/T 20034.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 94047-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 94047-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 94047-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 94047-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 94047-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 94047-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|