|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94011.4-2013: Reeds. Part 4: Reeds for warping machines and sizing machines
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 94011.4-2013 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Reeds. Part 4: Reeds for warping machines and sizing machines
| Valid |
FZ/T 94011.4-2013
|
PDF similar to FZ/T 94011.4-2013
Basic data | Standard ID | FZ/T 94011.4-2013 (FZ/T94011.4-2013) | | Description (Translated English) | Reeds. Part 4: Reeds for warping machines and sizing machines | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W94 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 8,825 | | Quoted Standard | GB/T 191; GB/T 2829; GB/T 4340.1 | | Regulation (derived from) | Ministry of Industry and Information Notice No. 52 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies: warping machine, sizing machine with a box (hereinafter referred to as "warping reed", "Sizing reed") Terminology and definitions, classification and marking requirements, test methods, inspection rules and packaging, labeling, st | FZ/T 94011.4-2013: Reeds. Part 4: Reeds for warping machines and sizing machines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reeds.Part 4. Reeds for warping machines and sizing machines
ICS 59.120.30
W94
People's Republic of China textile industry standards
Reeds - Part 4. warping machines, sizing machines with reed
Issued on. 2013-10-17
2014-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
FZ/T 94011 "reed" is divided into the following five sections.
--- Part 1. woven fabrics with a reed;
--- Part 2. rapier, projectile weaving machines with reed;
--- Part 3. water jet loom with a reed;
--- Part 4. warping machine, sizing machine reed;
--- Part 5. jet loom profiled reed dents.
This section FZ/T Part of 494,011.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by the China Textile Industry Association.
This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This section is drafted. Shaoxing Dingfeng Textile Equipment Co., Ltd. Changzhou reed, water-rich Shaoxing Textile Equipment Co.,
SECRETARY Shaanxi Institute of textile equipment.
The main drafters of this section. Qiu Li Feng, Zhao Yusheng, Yu Dingya, light Pei Xia, Shi Yuehao, Ni g Kong, the waters husband, Du Peng.
Reeds - Part 4. warping machines, sizing machines with reed
1 Scope
This section FZ/T 94011 specifies the warping machines, sizing machines with reed (hereinafter referred to as "warping reed" "sizing reed") terms and definitions, points
Classes and labeling requirements, test methods, inspection rules, packaging, labeling, storage.
This section applies to the whole machine, sizing machine reed.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Reed number reedcount
10cm wide reed reed effective number of teeth inside.
Note 1. The reed numerals every 10 cm with a dent.
Note 2. rewrite FZ/T 94046-2009, definitions 3.5.
4 Classification and Marking
4.1 Classification
According to the structure, folded into shape reed (Model Zx), straight reed (model Zh), stratified reed (model F) and common reed (Model P), see
Figures 1 to 4.
Figure 1 zigzag pattern reed --- Zx
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 94011.4-2013_English be delivered?Answer: Upon your order, we will start to translate FZ/T 94011.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 94011.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 94011.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|