|
US$179.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93079-2012: Rotor type open-end spinning machine. Resilient mounting
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 93079-2012 | English | 179 |
Add to Cart
|
3 days [Need to translate]
|
Rotor type open-end spinning machine. Resilient mounting
| Valid |
FZ/T 93079-2012
|
PDF similar to FZ/T 93079-2012
Basic data | Standard ID | FZ/T 93079-2012 (FZ/T93079-2012) | | Description (Translated English) | Rotor type open-end spinning machine. Resilient mounting | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W91 | | Classification of International Standard | 59.120.10 | | Word Count Estimation | 7,792 | | Quoted Standard | GB/T 191; GB/T 531.1; GB/T 1958; GB/T 2828.1-2003; GB/T 4879; GB/T 6543 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 20; industry standard filing Notice 2012 No. 7 (No. 151 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the rotor spinning machine Bumpers classification parameters and marking, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to turn the rotor spinning machine with | FZ/T 93079-2012: Rotor type open-end spinning machine. Resilient mounting---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rotor type open-end spinning machine.Resilient mounting
ICS 59.120.10
W91
People's Republic of China textile industry standards
Rotor spinning machine damping sleeve
Issued on. 2012-05-24
2012-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee mechanical accessory spinning, dyeing and finishing of textile machinery and Technical Committee (SAC/TC215/SC1)
Centralized.
This standard was drafted. National Textile Machinery Quality Supervision and Inspection Center, Wuxi Wang Fei Ltd., Shanghai Chun Rui Mechanical Technology
Ltd., Han Yan of China Textile Machinery Manufacturing Co., Ltd.
The main drafters. Zhang Yuhong, Ji Yunfei, millet BAUER, Fan Baojun.
Rotor spinning machine damping sleeve
1 Scope
This standard specifies the damping rotor spinning machine sets (hereinafter referred to as "damping set") classification, parameters and marking requirements, test methods, inspection regulations
And the signs, packaging, transportation and storage.
This standard applies to rotor spinning machine with a rotor damping sets.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness)
GB/T 1958 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
plan
GB/T 4879 rust-proof packaging
GB/T 6543 transport packaging corrugated box with a single and double corrugated boxes
3 classification, parameters and markers
3.1 Classification
A structured into type [Without Jacket (see Fig. 1)] and B [with a jacket (see Figure 2)].
3.2 Parameter
Parameters in Table 1.
Table 1
project
parameter
A B
Full-length l/mm 56,69,70 69
The outer ring outer diameter D1/mm 38 -
Coat outer diameter D2/mm - 39
The hole diameter d/mm 22
NOTE hole number 1 2
Inner sleeve cooling holes 0,3 0
Before the rubber ring number of holes 0,5 0
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93079-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93079-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 93079-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93079-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|