|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92066-2010: General specification for compensator device
Status: Valid FZ/T 92066: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 92066-2010 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
General specification for compensator device
| Valid |
FZ/T 92066-2010
|
| FZ/T 92066-1998 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
General specification for compensator device
| Obsolete |
FZ/T 92066-1998
|
PDF similar to FZ/T 92066-2010
Basic data | Standard ID | FZ/T 92066-2010 (FZ/T92066-2010) | | Description (Translated English) | General specification for compensator device | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W95 | | Classification of International Standard | 59.120.50 | | Word Count Estimation | 5,568 | | Date of Issue | 2010-12-29 | | Date of Implementation | 2011-04-01 | | Older Standard (superseded by this standard) | FZ/T 92066-1998 | | Quoted Standard | GB/T 22801; FZ/T 90074 | | Regulation (derived from) | Engineering (2010) No. 134 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the carbon steel pressure into the hole of the type, size, technical requirements and related restrictions. This standard applies to no impact on the working pressure is less than 0. 07MPa, operating temperature is 0 ~ 250��C atmospheric pressure into the hole. | FZ/T 92066-2010: General specification for compensator device---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for compensator device
ICS 59.120.50
W95
People's Republic of China textile industry standards
Replacing FZ/T 92066-1998
Dancers devices General
Issued on. 2010-12-29
2011-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
Instead of the standard FZ/T 92066-1998 "dancers devices General."
This standard FZ/T 92066-1998 compared to the main changes are as follows.
--- Adjustment and classification parameters;
--- Improve the installation guide roller surface parallel to the base of the guide roller and the level of degree requirements.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile machinery and accessories.
This standard was drafted. Zhangjiagang City Jianye Dyeing Machinery Co., Ltd., Jinjiang City, Ji Long Machinery Industrial Co., Ltd. Jiangsu red Dyeing
Machinery Co., Ltd., Wuxi Textile Machinery Research Institute.
The main drafters of this standard. Chen Jianrong, Li Gang, Zhang Yong, Zhang Yiqun, Li Liping.
This standard replaces the standards previously issued as follows.
--- FZ/T 92066-1998.
Dancers devices General
1 Scope
This standard specifies the classification dancers device parameters, requirements and test methods.
This standard applies to adjust the width of fabric and yarn between the drive unit or related speed difference of dyeing and finishing machinery generic device.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements
FZ/T 90074 textile machinery products Painting
3 Categories and Parameters
3.1 Classification
3.1.1 by structure type. Vertical, swing.
3.1.2 Press counterbalance in the form of. weight balance, pneumatic balanced.
3.2 Parameter
Table 1.
Table 1 millimeters
Project Parameters
Nominal width (B) 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600
Bearing installation center distance (L) L = B 200,300,400,500
4 Requirements
4.1 dancers change the fabric tension should be responsive, adjusting the position of the action should be smooth.
4.2 dancers pneumatic cylinder pressure should be stable, no leakage pipeline.
4.3 detector responsive and reliable.
4.4 guide roller shall comply with GB/T 22801 of.
4.5 Each guide roller rotating flexible, smooth.
4.6 installation guide roller surface parallelism tolerance baseline 0.5mm.
Tolerance levels guide roller surface 4.7 0.5/1000.
4.8 adjacent parallel 0.5mm tolerance between the guide rollers.
4.9 coating products shall comply FZ/T 90074 of.
5 Test methods
5.1 installation guide roller surface parallel to the baseline of (4.6), with a hammer hanging wire was detected.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 92066-2010_English be delivered?Answer: Upon your order, we will start to translate FZ/T 92066-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 92066-2010_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 92066-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 92066-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92066-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|