|
US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92060-2010: Selvedge guider
Status: Valid FZ/T 92060: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 92060-2010 | English | 149 |
Add to Cart
|
3 days [Need to translate]
|
Selvedge guider
| Valid |
FZ/T 92060-2010
|
| FZ/T 92060-1998 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Selvedge guider
| Obsolete |
FZ/T 92060-1998
|
PDF similar to FZ/T 92060-2010
Basic data | Standard ID | FZ/T 92060-2010 (FZ/T92060-2010) | | Description (Translated English) | Selvedge guider | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W95 | | Classification of International Standard | 59.120 | | Word Count Estimation | 6,622 | | Date of Issue | 2010-12-29 | | Date of Implementation | 2011-04-01 | | Older Standard (superseded by this standard) | FZ/T 92060-1998 | | Quoted Standard | GB/T 191; GB/T 531.1; FZ/T 90001 | | Regulation (derived from) | Engineering (2010) No. 134 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the suction side 's classification, parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to the control fabric weft move it along a given position (horizontal or vertical) running on general-purpose devices dyeing and finishing machinery. | FZ/T 92060-2010: Selvedge guider---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Selvedge guider
ICS 59.120
W95
People's Republic of China textile industry standards
Replacing FZ/T 92060-1998
Suction side
Issued on. 2010-12-29
2011-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
Instead of the standard FZ/T 92060-1998 "suction side."
This standard FZ/T 92060-1998 compared to the main changes are as follows.
--- Adjustment and classification parameters;
--- Adjustment electric, optical absorption edge is clamping force between the two pressure rollers;
--- Adjust the demands on the environment when measuring insulation resistance.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile machinery and accessories.
This standard was drafted. Jinjiang City Ji Long Machinery Industrial Co., Ltd., Jiangsu Little Sun Machinery Co., Ltd., Jiangsu red Dyeing Machine
Armed Ltd. Wuxi Textile Machinery Research Institute.
The main drafters of this standard. Ke Qingsong, Zhangrui Nan, Zhang Yong, Li Liping.
This standard replaces the standards previously issued as follows.
--- FZ/T 92060-1998.
Suction side
1 Scope
This standard specifies the suction side of the classification, parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the control fabric weft move to dyeing and finishing machinery generic device in a given position (horizontal or vertical) operation.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs
GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness)
FZ/T 90001 Textile machinery Packaging
3 Categories and Parameters
3.1 Classification
According to the principle. suction side electric, pneumatic suction side, photoelectric suction side.
3.2 Parameter
Table 1.
Table 1
Project Parameters
Nominal width (B)/mm 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600
Install the center distance (L)/mm L = B 300,400,500
Roll diameter/mm 60,65,70,75,80
Roll body length/mm 150,200,250,280,300
Roll axis and tilt angle of fabric weft/(°) 5 ~ 20
Pneumatic suction side compressed air pressure/MPa 0.05 ~ 0.2
Electric suction side, suction side input voltage photoelectric
(Ac)/V
Suction side Operating temperature/℃ ≤80
4 Requirements
4.1 suction side should be able to effectively control the movement weft fabric, the fabric does not occur around deflection.
4.2 suction side should have good widening wrinkle effect, so that the fabric remains flat.
4.3 suction side should have an effective protection.
4.4 soft roller surface suction side should be smooth.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 92060-2010_English be delivered?Answer: Upon your order, we will start to translate FZ/T 92060-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 92060-2010_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 92060-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 92060-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92060-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|