|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 60045-2014: Textile trim materials in the interior of automobiles. Test method for fogging characteristics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 60045-2014 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Textile trim materials in the interior of automobiles. Test method for fogging characteristics
| Valid |
FZ/T 60045-2014
|
PDF similar to FZ/T 60045-2014
Basic data | Standard ID | FZ/T 60045-2014 (FZ/T60045-2014) | | Description (Translated English) | Textile trim materials in the interior of automobiles. Test method for fogging characteristics | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 10,18 | | Date of Issue | 12/24/2014 | | Date of Implementation | 6/1/2015 | | Quoted Standard | GB/T 6529 | | Regulation (derived from) | Ministry of Industry and Information Technology Notice 2014 No. 83 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies two test methods for determination of automotive interior material atomization performance with square weave, that reflection method and gravimetric method. This standard applies to all types of automotive interior textile material | FZ/T 60045-2014: Textile trim materials in the interior of automobiles. Test method for fogging characteristics
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile trim materials in the interior of automobiles.Test method for fogging characteristics
ICS 59.080.30
W04
People's Republic of China textile industry standards
Automotive interior textile materials
Fogging performance test method
Issued on. 2014-12-24
2015-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile Industrial Textiles Technical Committee (SAC/TC209/SC7) centralized.
This standard is mainly drafted by. Textile Standard (Beijing) Co., Ltd. Inspection and Certification Center, China Textiles Industry Association, the National Textile
Woven Products Quality Supervision and Inspection Center.
The main drafters of this standard. Liu Feifei, Wang Huan, Xu Road, LI Gui-mei.
Automotive interior textile materials
Fogging performance test method
1 Scope
This standard specifies two test methods for determination of car interiors atomization performance of textile materials, namely reflection and gravimetric methods.
This standard applies to all types of automotive interior textile materials, including woven, knitted, non-woven fabrics and coated fabrics, and composite weave
Thereof. Two kinds of test results obtained test methods are not comparable.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6529 Textiles Standard conditioning and testing atmosphere
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Spray fogging
The volatiles were condensed to a solid surface phenomenon.
3.2
Fogging value foggingvalue
The ratio of atomized spray glass light reflectance value and the glass front of the light reflectance value, expressed in%.
3.3
Fog amount foggingmass
Atomized aluminum foil and spray the weight difference between the weight of the aluminum foil before, in mg.
Principle 4
The sample was placed in a glass beaker and heated under specified conditions, any volatile substance is condensed in a cooled glass plate or cooling
On aluminum foil. By calculating the amount of fogging value or atomized spray properties of the sample is expressed.
5 Equipment and Materials
5.1 thermostatic bath means. to maintain temperature (100 ± 0.5) ℃, which can accommodate at least three beakers. When the beaker was placed in a constant temperature bath device, from the beaker
Its edge at least 30mm, the bottom from the bottom of the beaker at least 75mm, should be equipped with a display device from the surface of the heat transfer fluid and under glass,
This distance shall be (60 ± 2) mm, see Figure 1.
5.2 cooling plate. corrosion-resistant metal, hollow inside, for cooling the surface should be flat. Can control the temperature in the cooling plate (21 ± 1) ℃,
The cooling plate inside and outside the water temperature should not exceed 1 ℃, the cooling plate is filled with water after at least 1kg.
5.3 Beaker. flat-bottomed beaker made of heat-resistant glass, the minimum mass of 450g, shown in Figure 2.
5.4 metal ring. made of stainless steel, an outer diameter of 80mm, an inner diameter of 74mm, height 10mm, the quality of (55 ± 1) g.
5.5 seal. made of silicone rubber or fluoro rubber, an inner diameter (95 ± 1) mm, thickness (4.0 ± 0.1) mm, the hardness of (65 ± 5) IRHD.
5.6 glass plate. thickness (3 ± 0.2) mm, a minimum size of square glass 110mm × 110mm, minimum diameter circular glass
103mm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 60045-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 60045-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 60045-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 60045-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|