|
US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01146-2018: Textiles. Test method for bagging deformation of fabrics
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01146-2018 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Textiles. Test method for bagging deformation of fabrics
| Valid |
FZ/T 01146-2018
|
PDF similar to FZ/T 01146-2018
Basic data | Standard ID | FZ/T 01146-2018 (FZ/T01146-2018) | | Description (Translated English) | Textiles. Test method for bagging deformation of fabrics | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.30 | | Word Count Estimation | 7,710 | | Date of Issue | 2018-12-21 | | Date of Implementation | 2019-07-01 | | Quoted Standard | GB/T 6529 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.67 of 2018 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies three test methods for fabric arching deformation, namely constant pressure stretching method, fixed elongation stretching method and tensile recovery method. This standard is mainly applicable to woven fabrics and knitted fabrics. Other types of fabrics can be referred to. | FZ/T 01146-2018: Textiles. Test method for bagging deformation of fabrics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textiles.Test method for bagging deformation of fabrics
ICS 59.080.30
W04
People's Republic of China Textile Industry Standard
Textile fabric buckling deformation test method
2018-12-21 released
2019-07-01 implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China National Textile and Apparel Council.
This standard is under the jurisdiction of the Basic Standards Subcommittee of the National Textile Standardization Technical Committee (SAC/TC209/SC1).
The main drafting organizations of this standard. Shenzhen Changshuo New Textile Material Co., Ltd., Fujian Huafeng New Material Co., Ltd., Anhui Yuhua Textile Co., Ltd.
Company, China Textile Standard Inspection and Certification Co., Ltd., Lutai Textile Co., Ltd.
The main drafters of this standard. Yang Xiaoxiao, He Huixin, Fan Bin, Zhang Xiaoqing, Han Xiaolei, Wang Xiaodan, Xu Baiqing, Li Tianyuan, Jiang Hong, Zhang Zhi,
Zhang Jianxiang and Geng Caihua.
Textile fabric buckling deformation test method
1 Scope
This standard specifies three test methods for fabric arching deformation, namely constant pressure stretching method, constant elongation stretching method and tensile recovery method.
This standard is mainly applicable to woven fabrics and knitted fabrics, other types of fabrics can be implemented by reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 6529 Standard atmosphere for textile humidity control and testing
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Bagging
When a certain area of the fabric is subjected to external forces, the surface of the fabric protrudes or swells.
3.2
Pre-setbaggingheight
The specimen clamped in the flat state, after the half sphere is extended to the set height, the vertical between the specimen dome and the specimen clamping plane
distance.
3.3
Pre-setpressurebaggingheight
The specimen clamped in the flat state, after the half sphere is stretched to the set pressure, the vertical between the specimen dome and the specimen clamping plane
distance.
3.4
Residual baggingheight
After the specimen is arched to the set arch height or constant pressure arch height, and maintain a certain tension and relaxation recovery time, at a certain initial pressure or
The vertical distance between the arch of the specimen and the center of the front plane of the specimen under the condition of displacement and stop pressure.
3.5
Residual rate of bagging
The percentage of the ratio of the residual arch height to the set arch height or constant pressure arch height.
4 Principle
Clamp a sample of a certain size flatly in the ring clamping device, and use a hemisphere that simulates the size of the elbow to stretch the sample to be tested.
At a certain height or a certain pressure value, the pressure load of the hemisphere is released after a certain period of time, and the specimen is restored for a certain period of time before arching
The residual rate characterizes the arching deformation recovery ability of the sample in this period of time.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 01146-2018_English be delivered?Answer: Upon your order, we will start to translate FZ/T 01146-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 01146-2018_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 01146-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|