HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

DZ/T 0276.23-2015 English PDF

US$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
DZ/T 0276.23-2015: Regulation for testing the physical and mechanical properties of rock. Part 23: Test for determining the point load strength of rock
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
DZ/T 0276.23-2015English239 Add to Cart 3 days [Need to translate] Regulation for testing the physical and mechanical properties of rock. Part 23: Test for determining the point load strength of rock Valid DZ/T 0276.23-2015

PDF similar to DZ/T 0276.23-2015


Standard similar to DZ/T 0276.23-2015

DZ/T 0216   GB/T 23249   GB/T 2007.4   DZ/T 0276.15   DZ/T 0276.10   DZ/T 0276.14   

Basic data

Standard ID DZ/T 0276.23-2015 (DZ/T0276.23-2015)
Description (Translated English) Regulation for testing the physical and mechanical properties of rock. Part 23: Test for determining the point load strength of rock
Sector / Industry Geological Industry Standard (Recommended)
Classification of Chinese Standard D00
Classification of International Standard 19.02
Word Count Estimation 10,165
Date of Issue 2015-02-04
Date of Implementation 2015-04-01
Older Standard (superseded by this standard) DY-94
Regulation (derived from) Ministry of Land and Resources - Announcement 2015 No. 5
Issuing agency(ies) Ministry of Land and Resources
Summary This Standard specifies the test method for the determination of rock and rock anisotropy point load strength index. This Standard applies to test physical and mechanical properties of rock point load strength test.

DZ/T 0276.23-2015: Regulation for testing the physical and mechanical properties of rock. Part 23: Test for determining the point load strength of rock


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Regulation for testing the physical and mechanical properties of rock. Part 23. Test for determining the point load strength of rock ICS 19.020 D00 People's Republic of China geological mineral industry standard Instead of DY-94 Rock physics and mechanics properties test procedures Part 23. Rock point load strength test Part 23. Testfordeterminingthepointloadstrengthofrock Released on.2015-02-04 2015-04-01 implementation Ministry of Land and Resources of the People's Republic of China

Foreword

DZ/T 0276 "Testing Procedures for Physical and Mechanical Properties of Rocks" is divided into 31 parts. --- Part 1. General and general provisions; --- Part 2. Rock moisture test; --- Part 3. Rock particle density test; --- Part 4. Rock density test; ---Part 5. Rock water absorption test; ---Part 6. Rock hardness test; --- Part 7. Rock gloss test; --- Part 8. Rock antifreeze test; ---Part 9. Rock resistance to disintegration test; --- Part 10. Rock expansion test; --- Part 11. Rock erosion test; --- Part 12. Rock acid and alkali resistance test; --- Part 13. Rock specific heat test; --- Part 14. Rock thermal conductivity test; ---Part 15. Rock breakdown voltage and breakdown strength test; ---Part 16. Rock volume resistivity and surface resistivity test; --- Part 17. Rock radioactivity specific activity test; ---Part 18. Rock uniaxial compressive strength test; ---Part 19. Rock uniaxial compression deformation test; --- Part 20. Rock triaxial compression strength test; --- Part 21. Rock tensile strength test; --- Part 22. Rock flexural strength test; --- Part 23. Rock point load strength test; --- Part 24. Rock acoustic wave velocity test; ---Part 25. Rock shear strength test; --- Part 26. Rock mass deformation test (bearing plate method); --- Part 27. Rock mass deformation test (drilling deformation method); ---Part 28. Rock mass strength test (direct shear test); --- Part 29. Rock mass strength test (bearing plate method); --- Part 30. Rock mass bolt load test; --- Part 31. Rock sound wave velocity test. This part is part 23 of DZ/T 0276. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces DY-94 "Testing procedures for physical and mechanical properties of rocks 20. Point load strength test". This part is compared with DY-94. The main technical changes are as follows. --- Added two chapters of "terms and definitions" and "principles"; --- Added measurement description of D value in soft rock test; --- Added observations on the damage characteristics of the specimen; --- Increased the calculation of the equivalent diameter; --- Added a correction method for the calculation result when the two-point spacing of the loading is not equal to 50mm; --- Increase the calculation method of the anisotropy coefficient; --- Delete the geological hammer in the equipment; --- Modified the rock point load strength test record table. This part is proposed by the Ministry of Land and Resources of the People's Republic of China. This part is under the jurisdiction of the National Land Resources Standardization Technical Committee (SAC/TC93). This section drafted by. Hubei Institute of Geological Experiments. Drafters of this section. Zhao Guifang, Mei Yuxiang, Yi Wan. The previous versions of the standards replaced by this section are. ---DY-86; ---DY-94. Rock physics and mechanics properties test procedures Part 23. Rock point load strength test

1 Scope

This part of DZ/T 0276 specifies test methods for determining rock point load strength and rock anisotropy index. This section applies to the rock point load strength test in rock physical and mechanical properties test.

2 Terms and definitions

The following terms and definitions apply to this document. 2.1 Point load strength index pointpointstrengthindex In the rock point load test, the ratio of the ultimate load at which the specimen is fractured to the square of the distance between the two loading points. 2.2 Anisotropy index anisotropicindex In the rock point load test, the rock point load strength index perpendicular to the weak surface and the rock point load strength index parallel to the weak surface Ratio.

3 Principle

Place the rock sample between the upper and lower spherical conical plates, and apply concentrated load to the sample until the sample is destroyed. Rock point load strength and anisotropy index. Point load strength can be used as an indicator of rock strength classification and rock mass weathering zoning, and can also be used to evaluate the anisotropy of rock strength. Degree, other strength values associated with it, such as uniaxial compressive strength and tensile strength are estimated.

4 instruments

4.1 Point load tester. 4.2 Vernier caliper. The range is 15cm and the precision is 0.02mm.

5 sample

5.1 Group rock specimens that are identifiable to the naked eye and have roughly the same engineering geological features. If the rock is anisotropic (such as bedding, sheet The obvious sedimentary rocks and metamorphic rocks should be further divided into two subgroups of parallel and vertical bedding loading, and each group of samples should not be less than 15. 5.2 Core-like, regular or irregular block specimens may be used. Different sample sizes should meet the following requirements. a) Core radial test, the length to diameter ratio of the sample should be greater than 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of DZ/T 0276.23-2015_English be delivered?

Answer: Upon your order, we will start to translate DZ/T 0276.23-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of DZ/T 0276.23-2015_English with my colleagues?

Answer: Yes. The purchased PDF of DZ/T 0276.23-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.