HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

DZ/T 0276.10-2015 English PDF

US$269.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
DZ/T 0276.10-2015: Regulation for testing the physical and mechanical properties of rock. Part 10: Test for determining the swelling property of rock
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
DZ/T 0276.10-2015English269 Add to Cart 3 days [Need to translate] Regulation for testing the physical and mechanical properties of rock. Part 10: Test for determining the swelling property of rock Valid DZ/T 0276.10-2015

PDF similar to DZ/T 0276.10-2015


Standard similar to DZ/T 0276.10-2015

DZ/T 0216   GB/T 23249   GB/T 2007.4   DZ/T 0276.1   DZ/T 0276.12   DZ/T 0276.11   

Basic data

Standard ID DZ/T 0276.10-2015 (DZ/T0276.10-2015)
Description (Translated English) Regulation for testing the physical and mechanical properties of rock. Part 10: Test for determining the swelling property of rock
Sector / Industry Geological Industry Standard (Recommended)
Classification of Chinese Standard D00
Classification of International Standard 19.02
Word Count Estimation 11,129
Date of Issue 2015-02-04
Date of Implementation 2015-04-01
Older Standard (superseded by this standard) DY-94
Quoted Standard DZ/T 0276.2
Regulation (derived from) Ministry of Land and Resources - Announcement 2015 No. 5
Issuing agency(ies) Ministry of Land and Resources
Summary This Standard specifies the sequence of rock free inflation rate, swelling and swelling pressure test method of lateral restraint. This Standard applies to test physical and mechanical properties of rock swelling test in which rock free swell test applies to water is not easy disintegration of rock.

DZ/T 0276.10-2015: Regulation for testing the physical and mechanical properties of rock. Part 10: Test for determining the swelling property of rock


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Regulation for testing the physical and mechanical properties of rock.Part 10. Test for determining the swelling property of rock ICS 19.020 D00 People's Republic of China geological mineral industry standard Instead of DY-94 Rock physics and mechanics properties test procedures Part 10. Rock expansion test Part 10.Testfordeterminingtheswelingpropertyofrock Released on.2015-02-04 2015-04-01 implementation Ministry of Land and Resources of the People's Republic of China

Foreword

DZ/T 0276 "Testing Procedures for Physical and Mechanical Properties of Rocks" is divided into 31 parts. --- Part 1. General and general provisions; --- Part 2. Rock moisture test; --- Part 3. Rock particle density test; --- Part 4. Rock density test; ---Part 5. Rock water absorption test; ---Part 6. Rock hardness test; --- Part 7. Rock gloss test; --- Part 8. Rock antifreeze test; ---Part 9. Rock resistance to disintegration test; --- Part 10. Rock expansion test; --- Part 11. Rock erosion test; --- Part 12. Rock acid and alkali resistance test; --- Part 13. Rock specific heat test; --- Part 14. Rock thermal conductivity test; ---Part 15. Rock breakdown voltage and breakdown strength test; ---Part 16. Rock volume resistivity and surface resistivity test; --- Part 17. Rock radioactivity specific activity test; ---Part 18. Rock uniaxial compressive strength test; ---Part 19. Rock uniaxial compression deformation test; --- Part 20. Rock triaxial compression strength test; --- Part 21. Rock tensile strength test; --- Part 22. Rock flexural strength test; --- Part 23. Rock point load strength test; --- Part 24. Rock acoustic wave velocity test; ---Part 25. Rock shear strength test; --- Part 26. Rock mass deformation test (bearing plate method); --- Part 27. Rock mass deformation test (drilling deformation method); ---Part 28. Rock mass strength test (direct shear test); --- Part 29. Rock mass strength test (bearing plate method); --- Part 30. Rock mass bolt load test; --- Part 31. Rock sound wave velocity test. This part is part 10 of DZ/T 0276. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces DY-94 "Testing procedures for physical and mechanical properties of rock 14. Expansion test". This part is compared with DY-94, the main technology The changes are as follows. --- Added three chapters of "normative reference documents", "terms and definitions", and "principles"; --- Increased the free expansion rate test; --- Modified the accuracy requirements for the calculation results; --- Modified the rock expansion test record table. This standard was proposed by the Ministry of Land and Resources of the People's Republic of China. This part is under the jurisdiction of the National Land Resources Standardization Technical Committee (SAC/TC93). This standard was drafted by the Hubei Institute of Geological Experiments, and the Guangdong Geological Experimental Testing Center participated in the drafting. The main drafters of this standard. Chen Yu, Zeng Jun, Ni Weidong, Yang Jie. The previous versions of the standards replaced by this section are. ---DY-86; ---DY-94. Rock physics and mechanics properties test procedures Part 10. Rock expansion test

1 Scope

This part of DZ/T 0276 specifies test methods for rock free expansion ratio, lateral restraint expansion ratio and expansion pressure. This section applies to rock swelling test in rock physical and mechanical properties test, in which rock free expansion test is suitable for water contact Rock that does not disintegrate.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. DZ/T 0276.2 Test procedures for physical and mechanical properties of rocks - Part 2. Rock moisture test

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Expansive swelingproperty The effect of volume expansion after rock sample immersion in water, using free expansion rate, expansion stress, expansion rate under different loads, side without load The coefficient of expansion and other parameters are expressed. 3.2 Free expansion rate freeswelingration The ratio of the radial and axial deformation of the rock sample after immersion to the diameter and height of the original sample, expressed as a percentage. 3.3 Swelling stress swelingstress The pressure per unit area required to maintain the original shape after the rock sample is immersed in water. 3.4 Lateral constraint expansion rate lateralconstraintswelingration The axial deformation of the rock specimen after immersion in water under the condition that the lateral restraint does not produce lateral deformation under axial load (or zero) load The ratio of the quantity to the original height of the test piece, expressed as a percentage.

4 Principle

The rock free expansion test is to determine the ratio of the radial and axial deformation of the rock sample to the diameter and height of the original sample after immersion. The lateral restraint expansion test of rock is to determine the diameter of the rock sample after water immersion in the case of applying different axial loads to the rock sample. The ratio of the axial and axial deformation to the diameter and height of the original sample. The rock expansion stress test is a force applied to a rock specimen after the rock sample is immersed in water to determine the shape of the rock.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of DZ/T 0276.10-2015_English be delivered?

Answer: Upon your order, we will start to translate DZ/T 0276.10-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of DZ/T 0276.10-2015_English with my colleagues?

Answer: Yes. The purchased PDF of DZ/T 0276.10-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.