Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Dec 4, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

YS/T 231-2015 (YS/T231-2015)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardSee DetailStatusRelated Standard
YS/T 231-2015English70 Add to Cart 0--10 minutes. Auto-delivery. Tungsten concentrate YS/T 231-2015 Valid YS/T 231-2015


YS/T 231-2015: PDF in English (YST 231-2015)
YS/T 231-2015
YS
NONFERROUS METAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 73.060.99
D 43
Replacing YS/T 231-2007
Tungsten concentrate
钨精矿
ISSUED ON. APRIL 30, 2015
IMPLEMENTED ON. OCTOBER 01, 2015
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Requirements ... 4 
4 Test Methods ... 5 
5 Inspection rules ... 6 
6 Marks, package, transportation, storage and quality certificate ... 7 
7 Contents of the orders (or contracts) ... 8 
Foreword
This Standard is drafted according to the rules given in the GB/T 1.1-2009.
This Standard replaces YS/T 213-2007 “Tungsten concentrate”.
Compared with YS/T 213-2007, the main changes of this Standard are as follows.
- ADJUST the chemical composition accordingly;
- REVISE the test methods and the inspection rules.
This Standard was proposed by and shall be under the jurisdiction of China National
Standardization Technical Committee of Nonferrous Metals.
Drafting organizations of this Standard. Ganzhou Nonferrous Metallurgy Research
Institute, Chenzhou Diamond Tungsten Products Co., Ltd, Hunan Shizhuyuan
Nonferrous Metals Co., Ltd, China Molybdenum Co., Ltd (Luoyang).
The main drafters of this Standard. Ye Chunsheng, Yang Xinhua, Xie Shengde, Jiang
Wenwei, Zhang Bilan, Tang Desheng, Xie Shiyong, Liu Hong, Pan Jianzhong, Zhang
Shubiao, Li Ying, Wen Zhimin, Li Chun hai, Tian Yonghong.
The historical versions replaced by this Standard are as follows.
- YB/T 504-65, GB 52825-19814;
- YS/T 231-1994, YS/T 231-2007.
Tungsten concentrate
1 Scope
This Standard specifies the requirements, test methods, inspection rules, marks,
package, transportation, storage, quality certificate and orders (or contracts) for the
tungsten concentrate.
This Standard applies to tungsten concentrate products selected in mine; it can be
used for producing ammonium paratungstate, tungstic acid, ammonium
metatungstate, tungsten oxide etc.
2 Normative references
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 1480 Metallic powder - Determination of particle size by dry sieving
GB/T 4414 Methods of sampling and sample preparation of tungsten concentrates in
bags
GB/T 6150 (All parts) Methods for chemical analysis of tungsten concentrates
GB/T 26019 Methods for chemical analysis of high impurity tungsten mineral -
Determination of tungsten trioxide content - Twice separation and igniting gravimetric
method
3 Requirements
3.1 Product classification
According to mineral types, tungsten concentrate is divided into scheelite and
wolframite; according to chemical composition, it is divided into total 14 types –
premium grade, grade I, grade II, grade III, grade IV, grade V, mixed tungsten
concentrate, and tungsten-slime. Mixed tungsten concentrate refers to the scheelite
and wolframite - without strictly-separated tungsten concentrate. Tungsten-slime
refers to tungsten products of which the granularity is less than 0.074 mm [The
content (mass fraction) of WO3 is 20%~40% ], and the impurity contents are relatively
high.
6.2.1 Use the double-ply bags to pack the tungsten concentrate. The bag openings
shall be sealed. The materials of packages shall be negotiated by the suppliers and
the buyers. The net weight of each bag of products shall be 50 kg or 1000 kg.
6.2.2 Keep dry when transporting. The products shall be stored in the dry place but
not the open air. Prevent from the damage of the packages.
6.3 Quality certificate
A quality certificate shall be attached to each batch of products, which shall note.
a) Name of suppliers;
b) Name of products;
c) Batch number;
d) Variety;
e) Number and net weight;
f) Inspection results and the marks of technical supervision departments;
g) Serial number of this Standard;
h) Date of exit-factory.
7 Contents of the orders (or contracts)
The orders listed by this Stander shall include following contents.
a) Name of products;
b) Variety;
c) Specific requirements of impurity content;
d) Quantity and net weight;
e) Number of this Standard;
f) Others.
......
 
(Above excerpt was released on 2016-06-03, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/YST231-2015