QC/T 1179-2022 PDF in English
QC/T 1179-2022 (QC/T1179-2022, QCT 1179-2022, QCT1179-2022)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
QC/T 1179-2022 | English | 80 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Specifications for automobile wheel bolts
| Valid |
Standards related to (historical): QC/T 1179-2022
PDF Preview
QC/T 1179-2022: PDF in English (QCT 1179-2022) QC/T 1179-2022
QC
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040
CCS T 33
Specifications for automobile wheel bolts
ISSUED ON: APRIL 08, 2022
IMPLEMENTED ON: OCTOBER 01, 2022
Issued by: Ministry of Industry and Information Technology of the People’s
Republic of China.
Table of Contents
Foreword ... 6
1 Scope ... 7
2 Normative references ... 7
3 Terms and definitions ... 8
4 Technical requirements ... 8
5 Test methods ... 9
Specifications for automobile wheel bolts
1 Scope
This document specifies the technical requirements and test methods for automobile
wheel bolts (referred to as wheel bolts).
This document applies to automobile wheel bolts.
2 Normative references
The following documents are normatively referenced in this document and are
indispensable for its application. For dated references, only the version corresponding
to that date is applicable to this document; for undated references, the latest version
(including all amendments) is applicable to this document.
GB/T 196, General purpose metric screw threads - Basic dimensions
GB/T 197, General purpose metric screw threads - Tolerances
GB/T 1958, Geometrical product specifications (GPS) - Geometrical tolerance -
Verification
GB/T 3098.1-2010, Mechanical properties of fasteners - Bolts, screws and studs
GB/T 5779.1-2000, Fasteners - Surface discontinuities - Bolts, screws and studs for
general requirements
GB/T 6478, Steels for cold heading and cold extruding
GB/T 13320, Metallographic grading atlas and assessing method for steel die
forgings
GB/T 13682, Axial load fatigue testing for threaded fasteners
GB/T 30512, Requirements for prohibited substances on automobiles
JB/T 9151.1-1999, Method of verification for fasteners - Size and geometry - Bolts,
screws, studs and nuts
QC/T 625, Metallic coatings and conversion coatings for automobiles
QC/T 715, Measuring method for friction coefficient of screw thread pair of
automobiles
4.6 The automobile manufacturer shall specify the stress level of the wheel bolts
(average stress σm, stress amplitude σs, stress ratio r), and the number of cycles shall be
5×106. The wheel bolts shall not be cracked or broken.
4.7 During the vehicle reliability driving test, the wheel bolts shall not be cracked or
broken.
4.8 During the vehicle durability driving test, the wheel bolts shall not be cracked or
broken.
4.9 Surface discontinuities of wheel bolts shall comply with the provisions of GB/T
5779.1-2000.
4.10 The automobile manufacturer shall specify the surface treatment method for the
wheel bolts. Among them, the wheel bolts of grade 8.8 can be surface-treated with
galvanized passivation or non-electrolytic zinc plate coating or zinc-nickel alloys, and
the wheel bolts of grade 10.9 can be surface-treated with non-electrolytic zinc plate
coating or zinc-nickel alloys, as well as other surface treatments. Surface treatment shall
comply with the regulations of QC/T 625. Prohibited substance content shall comply
with the provisions of GB/T 30512.
4.11 The friction coefficient of the wheel bolts shall be agreed upon by the supplier and
the buyer.
5 Test methods
5.1 The inspection of thread, size and geometric accuracy shall comply with the
provisions of JB/T 9151.1-1999 and GB/T 1958.
5.2 The test methods for mechanical properties and physical properties shall be in
accordance with the provisions of GB/T 3098.1-2010.
5.3 Carry out metallographic structure grading in accordance with the provisions of
GB/T 13320.
5.4 The inspection of the grain flow line shall be in accordance with the regulations of
ASTM E340.
5.5 Fatigue testing shall comply with the provisions of GB/T 13682.
5.6 The automobile manufacturer is responsible for the formulation and implementation
of the vehicle reliability driving (loading) test program for wheel bolts.
5.7 The automobile manufacturer is responsible for the formulation and implementation
of the automobile durability driving (mounting) test program for wheel bolts.
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|