GB/T 8152.10-2006 PDF in English
GB/T 8152.10-2006 (GB/T8152.10-2006, GBT 8152.10-2006, GBT8152.10-2006)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 8152.10-2006 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Methods for chemical analysis of lead concentrates -- Determination of silver and gold content -- Fire assay and flame atomic absorption spectrometric method using scorification or cupellation
| Valid |
| GB/T 8152.10-1989 | English | 199 |
Add to Cart
|
2 days
|
Methods for chemical analysis of lead concentrates--Determination of silver content--Flame atomic absorption spectrophotometric method
| Obsolete |
Standards related to (historical): GB/T 8152.10-2006
PDF Preview
GB/T 8152.10-2006: PDF in English (GBT 8152.10-2006) GB/T 8152.10-2006
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 73.060
D 42
GB/T 8152.10-2006 / ISO 12740:1998(E)
Replacing GB/T 8152.9~8152.10-1989
Methods for Chemical Analysis of Lead Concentrates -
Determination of Silver and Gold Content - Fire Assay and
Flame Atomic Absorption Spectrometric Method Using
Scorification or Cupellation
(ISO 12740:1998E, Lead Sulfide Concentrates - Determination of Silver and
Gold Content - Fire Assay and Flame Atomic Absorption Spectrometric
Method Using Scorification or Cupellation, IDT)
ISSUED ON: AUGUST 24, 2006
IMPLEMENTED ON: FEBRUARY 1, 2007
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative References ... 6
3 Principle ... 7
4 Reagents ... 7
5 Apparatus ... 10
6 Sample ... 11
7 Procedure ... 11
8 Expression of Results ... 18
9 Precision ... 18
10 Test report... 21
Annex A (Normative) Procedure for the Preparation and Determination of the
Mass of a Pre-dried Test Portion ... 23
Annex B (Normative) Trial Fusion ... 25
Annex C (Normative) Blank Determination ... 26
Annex D (Normative) Flowsheet of the Procedure for the Acceptance of
Analytical Values for the Test Samples ... 27
Annex E (Informative) Derivation of Precision Equations ... 28
Bibliography ... 35
Foreword
GB/T 8152-2006 Methods for Chemical Analysis of Lead Concentrates has 10 parts in
total:
---GB/T 8152.1 Methods for Chemical Analysis of Lead Concentrates -
Determination of Lead Content - EDTA Titration Method after Acid Digestion;
---GB/T 8152.2 Methods for Chemical Analysis of Lead Concentrates -
Determination of Lead Content - Back Titration of EDTA after Precipitation of
Lead Sulfate;
---GB/T 8152.3 Methods for Chemical Analysis of Lead Concentrates -
Determination of Aluminum (III) Oxide Content - Chromazurol S
Spectrophotometric Method;
---GB/T 8152.4 Methods for Chemical Analysis of Lead Concentrates -
Determination of Zinc Content - EDTA Titration Method;
---GB/T 8152.5 Methods for Chemical Analysis of Lead Concentrates -
Determination of Arsenic Content - Atomic Fluorescence Spectrometer Method;
---GB/T 8152.7 Methods for Chemical Analysis of Lead Concentrates -
Determination of Copper Content - Flame Atomic Absorption Spectrometric
Method;
---GB/T 8152.9 Methods for Chemical Analysis of Lead Concentrates -
Determination of Magnesium Oxide Content - Flame Atomic Absorption
Spectrometric Method;
---GB/T 8152.10 Methods for Chemical Analysis of Lead Concentrates -
Determination of Silver and Gold Content - Fire Assay and Flame Atomic
Absorption Spectrometric Method Using Scorification or Cupellation;
---GB/T 8152.11 Methods for Chemical Analysis of Lead Concentrates -
Determination of Mercury Content - Atomic Fluorescence Spectrometer
Method;
---GB/T 8152.12 Methods for Chemical Analysis of Lead Concentrates -
Determination of Cadmium Content - Flame Atomic Absorption Spectrometric
Method.
GB/T 8152.6-1987 Methods for Chemical Analysis of Lead Concentrates - The
Polarographic Method for the Determination of Bismuth Content and GB/T 8152.8-
1987 Methods for Chemical Analysis of Lead Concentrates - The DTPM
Spectrophotometric Method for the Determination of Bismuth Content remain
unchanged.
This is the 10th part of GB/T 8152.
This Part equivalently adopts IEC 12740:1998(E) Lead Sulfide Concentrates -
Determination of Silver and Gold Contents - Fire Assay and Flame Atomic Absorption
Spectrometric Method Using Scorification or Cupellation.
In order to make it convenient for users, this Part makes the following editorial
modifications:
a) Decimal point “.” is used to replace “,”, which acts as decimal point in the
international standard;
b) “this Part” is used to replace “this international standard”;
c) In accordance with the idiomatic ways in Chinese, the title of the standard is
modified;
d) The front page, contents, foreword and introduction in the international standard
are deleted.
This Part serves as a replacement of GB/T 8152.9-1987 Methods for Chemical
Analysis of Lead Concentrates - The Fire-assaying Methods for the Determination of
Gold and Silver Content and GB/T 8152.10-1987 Methods for Chemical Analysis of
Lead Concentrates - Determination of Silver Content - Flame Atomic Absorption
Spectrophotometric Method. Due to the development of the international analytical
techniques, the previous standards are outdated. In comparison with GB/T 8152.9 ~
GB/T 8152.10-1987, there are several changes as follows:
a) This Part combines two methods in the previous national standards into one
method, namely, it adopts scorification or cupellation for sample processing,
and flame atomic absorption spectrometric method for determination.
b) This Part adds normative technical elements, such as “precision” and “test
report”, so as to further improve the standard text.
c) Annex A “Instrument Working Conditions” in the previous national standard is
deleted.
d) Annex A “Procedure for the Preparation and Determination of the Mass of a
Predried Test Portion”; Annex B “Trial Fusion”; Annex C “Blank Determination”;
Annex D “Flowsheet of the Procedure for the Acceptance of Analytical Values
for the Test Samples”; Annex E “Derivation of Precision Equations”; Annex F
“Bibliography” are added.
In this Part, Annex A, Annex B, Annex C and Annex D are normative; Annex E is
informative.
This Part was proposed by China Nonferrous Metals Industry Association.
This Part shall be under the jurisdiction of National Technical Committee 243 on
Nonferrous Metals of Standardization Administration of China (SAC/TC 243).
The responsible drafting organization of this Part: Zhuzhou Smelter Group Company
Limited.
The main drafters of this Part: He Zongpu, Lei Suhan, Huang Xiaogang.
The issuing of the previous versions of the standard replaced by this Standard is as
follows:
---GB/T 8152.9~8152.10-1987.
Methods for Chemical Analysis of Lead Concentrates -
Determination of Silver and Gold Content - Fire Assay
and Flame Atomic Absorption Spectrometric Method
Using Scorification or Cupellation
1 Scope
This Part specifies a fire assay and flame atomic absorption spectrometric procedure
for the determination of silver and gold contents of lead sulfide concentrates.
This Part is applicable to the determination of silver and gold in lead sulfide
concentrates containing 10 % (mass fraction) to 80% (mass fraction) lead.
This Part is applicable to Ag contents from 200 g/t to 2,000 g/t and Au contents from
0.1 g/t to 25 g/t.
2 Normative References
The following standards contain provisions which, through reference in this text,
constitute provisions of this standard. At the time of publication, the editions indicated
were valid. All standards are subject to revision, and parties to agreements based on
this standard are encouraged to investigate the possibility of applying the most recent
editions of the standards indicated below. Members of IEC and ISO maintain registers
of currently valid International Standards.
ISO 385-1:1984, Laboratory glassware - Burettes - Part 1: General requirements.
ISO 648:1977, Laboratory glassware - One-mark pipettes.
ISO 1042:1998, Laboratory glassware - One-mark volumetric flasks.
ISO 3696:1987, Water for analytical laboratory use - Specification and test methods.
ISO 4787:1984, Laboratory glassware - Volumetric glassware - Methods for use and
testing of capacity.
ISO 9599:1991, Copper, lead and zinc sulfide concentrates - Determination of
hygroscopic moisture in the analysis sample - Gravimetric method.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|