Powered by Google www.ChineseStandard.net Database: 189759 (14 Apr 2024)

GB/T 4365-2003 (GB/T4365-2003)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 4365-2003English170 Add to Cart 0-9 seconds. Auto-delivery. Electrotechnical terminology -- Electromagnetic compatibility Valid


Standards related to: GB/T 4365-2003

GB/T 4365-2003: PDF in English (GBT 4365-2003)

GB/T 4365-2003
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 33.100
L 06
idt IEC 60050(161):1990
Replacing GB/T 4365-1995
Electrotechnical terminology -
Electromagnetic compatibility
ISSUED ON: JANUARY 17, 2003
IMPLEMENTED ON: MAY 01, 2003
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the PRC
Table of Contents
Foreword ... 3 
IEC foreword ... 5 
1 Scope ... 6 
2 Terminology for electromagnetic compatibility ... 6 
2.1 Basic concepts ... 6 
2.2 Disturbance waveforms ... 10 
2.3 Interference control ... 13 
2.4 Measurements ... 17 
2.5 Equipment classification ... 23 
2.6 Receiver and transmitter ... 24 
2.7 Power controls and supply network impedances ... 29 
2.8 Voltage change and flicker ... 32 
Appendix A (Informative) Index in Chinese ... 35 
Appendix B (Informative) Index in English ... 38 
Foreword
This Standard is identical to the principles of international standard (IEC
60050(161):1990 “International Electrotechnical Vocabulary - Chapter 161:
Electromagnetic compatibility” and its Amendment 1:1997 and Amendment
2:1998); and revises GB/T 4365-1995 “Terminology for electromagnetic
compatibility” (eqv IEC 60050(161):1990). A total of 30 entries are revised.
This Standard has a total of 192 entries. According to the results of the
consultation BETWEEN the High and New Technology Department of
Standardization Administration of the PRC AND National Technical Committee
79 on Radio Jamming of Standardization Administration of China, for the
treatment method in IEC 60050-713:1998 “International Electrotechnical
Vocabulary (IEV) - Part 713: Radiocommunications: transmitters, receivers,
networks and operation” (which has been identically converted to national
standard GB/T 2900.54-2002) developed by IEC TC1 for the modified clauses
of 17 terms of IEC 60050-161 “International Electrotechnical Vocabulary -
Chapter 161: Electromagnetic compatibility”, the definition of the corresponding
entry in GB/T 2900.54-2002 is adopted and added in the form of a note to the
definition of the related term in this Standard. After IEC 60050-161 is modified,
this Standard will be modified accordingly.
This Standard, according to the requirements of GB/T 1.1-2000, makes a few
editorial changes. The term number is consistent with IEC 60050(161):1990.
Appendix A and Appendix B of this Standard are informative appendices.
This Standard, from the date of implementation, replaces GB/T 4365-1995
“Terminology for electromagnetic compatibility”.
This Standard was proposed by National Technical Committee 79 on Radio
Jamming of Standardization Administration of China.
This Standard shall be under the jurisdiction of National Technical Committee
79 on Radio Jamming of Standardization Administration of China and China
National Technical Committee for Electrotechnical Terminology Standardization.
Responsible drafting organization of this Standard: Shanghai Electrical
Apparatus Research Institute.
Participating drafting organizations of this Standard: State Grid Wuhan High
Voltage Research Institute, China Academy of Machinery Science and
Technology.
Main drafters of this Standard: Gong Zeng, Yang Ziyou, Lang Weichuan, Yang
Electrotechnical terminology –
Electromagnetic compatibility
1 Scope
This Standard specifies the terminology for electromagnetic compatibility in
terms of basic concepts, disturbance waveforms, interference control
measurements, equipment classification, receiver and transmitter, power
controls and supply network impedances, and voltage change and flicker.
This Standard applies to the preparation of various standards and other
technical literature on electromagnetic compatibility.
2 Terminology for electromagnetic compatibility
2.1 Basic concepts
161-01-01 electromagnetic environment
The totality of electromagnetic phenomena existing at a given
location.
Note: In general, the electromagnetic environment is time dependent and
its description may need a statistical approach.
161-01-02 electromagnetic noise
A time-varying electromagnetic phenomenon apparently not
conveying information and which may be superimposed on or
combined with a wanted signal.
161-01-03 unwanted signal; undesired signal
A signal that may impair the reception of a wanted signal.
161-01-04 interfering signal
A signal that impairs the reception of a wanted signal.
161-01-05 electromagnetic disturbance
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.