GB/T 41014-2021 PDF English
US$170.00 · In stock · Download in 9 secondsGB/T 41014-2021: Evaluation of the energy performance of lighting systems Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
GB/T 41014-2021 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Evaluation of the energy performance of lighting systems
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 41014-2021
GB/T 41014-2021: Evaluation of the energy performance of lighting systems---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT41014-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
CCS F 01
Evaluation of the energy performance of lighting systems
ISSUED ON: DECEMBER 31, 2021
IMPLEMENTED ON: JULY 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions... 5
4 Evaluation of energy performance grades ... 5
5 Evaluation procedure ... 6
Appendix A (Normative) Lighting system energy performance evaluation index system
and scoring method ... 9
References ... 17
Evaluation of the energy performance of lighting systems
1 Scope
This document specifies the evaluation grades and evaluation procedures for the energy
performance of lighting systems.
This document applies to the evaluation of energy performance of lighting systems in
stably operated urban roads, highway tunnels, public buildings, and outdoor work
places. It can be used as a reference for the evaluation of energy performance of other
lighting systems.
This document does not apply to the acceptance evaluation of lighting systems.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
document and are indispensable for its application. For dated references, only the
version corresponding to that date is applicable to this document; for undated references,
the latest version (including all amendments) is applicable to this document.
GB 17625.1, Electromagnetic compatibility - Limits - Limits for harmonic current
emissions (equipment input current ≤16 A per phase)
GB/T 17743, Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment
GB 17896, Minimum allowable values of energy efficiency and energy efficiency
grades of ballasts for tubular fluorescent lamps
GB/T 18595, Equipment for general lighting purposes - EMC immunity
requirements
GB 19573, Limited values of energy efficiency and rating criteria for high-pressure
sodium vapour lamps
GB 19574, Limited values of energy efficiency and evaluating values of energy
conservation of ballast for high-pressure sodium lamps
GB 20053, Minimum allowable values of energy efficiency and energy efficiency
grades for ballasts of metal-halide lamps
GB 20054, Minimum allowable values of energy efficiency and energy efficiency
grades for metal-halide lamps
If the total score for the evaluation of energy performance of the lighting system is
lower than 60, it is unqualified, and energy-saving measures shall be taken to optimize
and improve it in time.
5 Evaluation procedure
5.1 Determine the evaluation scope
Before the evaluation, a list of lighting facilities involved in the evaluation shall be
clearly defined, the evaluation scope shall be determined, and a written record shall be
formed.
The evaluation scope shall be jointly determined by the lighting system operator or
manager, the evaluation agency or personnel.
The scope of the lighting system usually includes lamps and a control management
system. Among them, the lamps in the lighting system can be either integrated lamps
or lamps composed of power supplies, light sources/modules, and the like. The control
management system usually includes a single lamp controller, a sensor installed inside
or outside the lamp, a centralized controller outside the lamp (also known as "cabinet
control"), and control software.
5.2 Determine the evaluation period
The time period (evaluation period) involved in the evaluation shall be clearly defined
before the evaluation. The time period during which the lighting system is operating
normally shall be selected as the evaluation period.
5.3 Collect data
Before the evaluation, technical and management documents related to system design,
selection, operation and management, etc. shall be collected according to the
determined evaluation scope and evaluation period, including but not limited to:
a) basic system information;
b) system design information;
c) project bidding documents, energy-saving assessment and other special reports;
d) equipment ledger, including a list of equipment and facilities within the system
boundary;
e) relevant test, evaluation and verification reports;
f) technical data such as operating procedures, operation records, maintenance
records, energy consumption statistics, historical lighting time, etc.;
g) personnel qualification certificates, training records, etc.;
h) energy-saving renovation certification documents and others.
When the collected data cannot fully confirm the actual operation of the system, on-site
measurement shall be carried out.
5.4 Evaluation implementation
5.4.1 The lighting system operator or manager shall ensure that the system operation
meets the requirements of laws, regulations and mandatory standards on safety, energy
saving and environmental protection.
5.4.2 The evaluation agency or personnel shall evaluate each index in accordance with
the lighting system energy performance evaluation index system and scoring method
given in Appendix A, from six aspects, including equipment and facilities, system
design, energy-saving monitoring, operation control, energy-saving renovation, and
management measures, and sum up the scores of each index to obtain the quantitative
result of the comprehensive score for the evaluation of energy performance of the
lighting system.
5.4.3 The evaluation agency or personnel shall give the score by consulting and
checking design documents, statistical reports, original records, declaration documents,
analysis/test reports, third-party certification certificates and other supporting materials.
Relevant evaluation information can also be collected through discussions, field
investigations, sample surveys, and field tests.
5.4.4 The evaluation agency or personnel can give suggestions on energy-saving
measures in terms of system optimization and transformation, strengthening
management, etc. based on the scoring results.
5.5 Prepare evaluation report
The evaluation report shall include the following:
a) a brief description of the evaluation work process;
b) evaluation implementation team;
c) evaluation scope;
d) a list of information collected for the evaluation;
e) a description of the score sheet and certification materials;
f) energy performance grades;
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 41014-2021 be delivered?Answer: The full copy PDF of English version of GB/T 41014-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 41014-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41014-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 41014-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
How to buy and download a true PDF of English version of GB/T 41014-2021?A step-by-step guide to download PDF of GB/T 41014-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "GB/T 41014-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|