HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 34845-2017 PDF English


Search result: GB/T 34845-2017 English: PDF (GB/T34845-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 34845-2017English80 Add to Cart 0-9 seconds. Auto-delivery. Tissue paper -- Determination of absorbable organic halogen (AOX) Valid
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 34845-2017     Related standards: GB/T 34845-2017

PDF Preview: GB/T 34845-2017


GB/T 34845-2017: PDF in English (GBT 34845-2017)

GB/T 34845-2017 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 85.080 Y 30 Tissue paper - Determination of adsorbable organic halogen (AOX) ISSUED ON: NOVEMBER 01, 2017 IMPLEMENTED ON: MAY 01, 2018 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of PRC. Table of Contents Foreword ... 3  1 Scope ... 4  2 Normative references ... 4  3 Terms and definitions ... 4  4 Principle ... 5  5 Apparatus and equipment ... 5  6 Reagents and materials ... 5  7 Sampling and processing ... 6  8 Test procedure ... 6  9 Result calculation ... 7  10 Inspection and calibration ... 7  11 Test report ... 8  Tissue paper - Determination of adsorbable organic halogen (AOX) 1 Scope This standard specifies the determination method for adsorbable organic halogens (AOX) in tissue paper. This standard applies to the determination of AOX in tissues, toilet paper and other tissue papers. The detection limit of this standard is 2 mg/kg. 2 Normative references The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard. GB/T 450 Paper and board - Sampling for testing and identification of machine and cross direction wire side and felt side GB/T 462 Paper, board and pulp - Determination of moisture content of analytical sample 3 Terms and definitions The following terms and definitions apply to this document. 3.1 Tissue paper Crepe paper for sanitary wipes produced from wood fiber or non-wood fiber, including toilet paper, paper towels (paper napkins, paper face towels, paper handkerchiefs), hand tissues, kitchen paper towels, etc. 3.2 Adsorbable organic halogen; AOX 6.4 Activated carbon: Dedicated for determination of adsorbable organic halogen (AOX). 6.5 Electrolyte: Measure 75 mL of 98% glacial acetic acid; add water to make the volume to 100 mL. 6.6 Hydrochloric acid solution: 0.010 mol/L; measure 32.57 mL of 0.307 mol/L hydrochloric acid (density at 1.19 g/mL); add water to make the volume to 1 L. 6.7 p-chlorophenol stock solution: 200 μg/L; weigh 72.5 mg of p-chlorophenol; add water to make the volume to 100 mL. 6.8 Compressed gas: It is necessary to dilute oxygen with inert gas to control combustion during combustion. All gases used in the test shall not contain any form of chlorine and bromine. 7 Sampling and processing 7.1 Sampling shall be carried out in accordance with the provisions of GB/T 450. 7.2 Test the moisture of the sample in accordance with the provisions of GB/T 462. 7.3 Preparation of the specimen: Use tweezers or scissors to tear or cut the sample into small pieces. Protective gloves shall be worn during specimen collection and preparation, to prevent contamination of the specimen. 8 Test procedure 8.1 Weigh 0.4 g ~ 0.6 g (accurate to 1 mg) of specimen. Put it into a 250 mL conical flask (5.4). Add 100 mL of sodium nitrate working solution (6.2). Close the stopper and shake the conical flask vigorously to make specimen is fully moistened. Then place it on the oscillator (5.2). Oscillate at a speed of 150 times/min for 1 h. 8.2 After oscillation, use the filter device (5.3) that has been installed in a clean quartz cup filter to filter the contents of the conical flask; use 25 mL of sodium nitrate working solution to rinse the conical flask and the inner wall of the filter. Collect all the filtrate in a clean conical flask. Keep the filtrate A for later use. 8.3 Add 50 mg of activated carbon (6.4) to the filtrate A. Cap the flask tightly. Then place it on the oscillator, to oscillate it at a speed of 150 times/min for 1 h. 8.4 Use a filter device to filter the contents of the conical flask to another clean quartz cup. Use 25 mL of sodium nitrate working solution to rinse the conical ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.