GB/T 32055-2015 PDF in English
GB/T 32055-2015 (GB/T32055-2015, GBT 32055-2015, GBT32055-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 32055-2015 | English | 130 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Microbeam analysis -- Electron probe microanalysis -- Methods for elemental-mapping analysis using wavelength dispersive spectroscopy
| Valid |
Standards related to (historical): GB/T 32055-2015
PDF Preview
GB/T 32055-2015: PDF in English (GBT 32055-2015) GB/T 32055-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.040.50
G 04
GB/T 32055-2015 / ISO 11938.2012
Microbeam Analysis - Electron Probe Microanalysis -
Methods for Elemental-Mapping Analysis Using
Wavelength Dispersive Spectroscopy
(ISO 11938.2012, IDT)
ISSUED ON. OCTOBER 9, 2015
IMPLEMENTED ON. SEPTEMBER 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 6
4 Procedure of Mapping Analysis ... 6
5 Methods for Displaying Element Maps ... 11
6 Evaluation of Uncertainty ... 13
7 Report ... 14
Appendix A (Normative) Comparison of Absorption Effects for a Light Element
... 15
Bibliography ... 17
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard’s translation equivalently adopts ISO 11938.2012 Microbeam Analysis -
Electron Probe Microanalysis - Methods for Elemental-Mapping Analysis Using
Wavelength Dispersive Spectroscopy (English Edition).
The Chinese documents that have corresponding relation to the international
documents normatively quoted in this Standard are as follows.
--- GB/T 6379.6-2009 Accuracy (Trueness and Precision) of Measurement Methods
and Results - Part 6. Use in Practice of Accuracy Values (ISO 5725-6.1944, IDT)
--- GB/T 20725-2006 Electron Probe Microanalysis Guidelines for Qualitative Point
Analysis by Wavelength Dispersive X-Ray Spectrometry (ISO 17470.2004, IDT)
--- GB/T 21636-2008 Microbeam Analysis - Electron Probe Micro Analysis (EPMA)
– Vocabulary (ISO 23833.2006, IDT)
--- GB/T 28634-2012 Microbeam Analysis - Electron Probe Microanalysis -
Quantitative Point Analysis for Bulk Specimen Using Wavelength Dispersive X-
Ray Spectroscopy (ISO 22489.2006, IDT)
--- GB/T 30705-2014 Microbeam Analysis - Electron Probe Microanalysis -
Guidelines for the Determination of Experimental Parameters for Wavelength
Dispersive Spectroscopy (ISO 14594.2003, IDT)
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee for Standardization of Microbeam Analysis (SAC/TC 38).
Drafting organizations of this Standard. Institute of mineral resources, Chinese
Academy of Geological Sciences; and Shanghai Institute of Ceramics, Chinese
Academy of Sciences.
Chief drafting staffs of this Standard. Chen Zhenyu, Li Xiangting, Zeng Yi, and Zhou
Jianxiong.
Microbeam Analysis - Electron Probe Microanalysis -
Methods for Elemental-Mapping Analysis Using
Wavelength Dispersive Spectroscopy
1 Scope
This Standard provides procedures for electron microprobe elemental mapping
analysis using wavelength dispersive spectrometry. The choice between mapping with
the electron beam moving digitally across the specimen (electron beam mapping) and
mapping with stage movement only (large-area mapping) is assessed. It describes five
types of data processing. the raw X-ray intensity data method, the k-value method, the
calibration method, the correlation method and the matrix correction method.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this Standard.
GB/T 15247-2008 Microbeam Analysis - Electron Probe Microanalysis - Guidelines
for Determining the Carbon Content of Steels Using Calibration Curve Method (ISO
16592.2006, IDT)
GB/T 27025-2008 General Requirements for the Competence of Testing and
Calibration Laboratories (ISO/IEC 17025.2005, IDT)
ISO 5725-6 Accuracy (Trueness and Precision) of Measurement Methods and
Results Part 6. Use in Practice of Accuracy Values
ISO 14594 Microbeam Analysis Electron Probe Microanalysis - Guidelines for the
Determination of Experimental Parameters for Wavelength Dispersive
Spectroscopy
ISO 17470 Microbeam Analysis - Electron Probe Microanalysis - Guidelines for
Qualitative Point Analysts by Wavelength Dispersive X-Ray Spectrometry
ISO 22489 Microbeam Analysis - Electron Probe Microanalysis - Quantitative Point
Analysis for Bulk Specimens Using Wavelength Dispersive X Ray Spectroscopy
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|