GB/T 24768-2009 PDF in English
GB/T 24768-2009 (GB/T24768-2009, GBT 24768-2009, GBT24768-2009)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 24768-2009 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
1,4-Butanediol for industrial use
| Valid |
Standards related to (historical): GB/T 24768-2009
PDF Preview
GB/T 24768-2009: PDF in English (GBT 24768-2009) GB/T 24768-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.080.60
G 17
1,4-Butanediol for industrial use
ISSUED ON. DECEMBER 15, 2009
IMPLEMENTED ON. JULY 1, 2010
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Requirements ... 5
4 Test methods ... 5
5 Inspection rules ... 9
6 Marks, packaging, transport and storage ... 9
Annex A (Normative) Typical chromatogram, relative retention, relative
correction factor for determination of 1,4-butanediol for industrial use content
... 11
1,4-Butanediol for industrial use
1 Scope
This Standard specifies the requirements, test methods, inspection rules and
marks, packaging, transport and storage of 1,4-butanediol for industrial use.
This Standard is applicable to the production, inspection and sales of 1,4-
butanediol for industrial use.
Chemical formula. C4H10O2
Relative molecular mass. 90.15 (according to 2007 international relative atomic
mass)
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For dated references, the subsequent
amendments (excluding corrigendum) or revisions do not apply to this Standard,
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 325.1, Packing containers - Steel drums - Part 1. General
specifications
GB/T 3143, Color determination method of liquid chemicals (Hazen unit -
Platinum-cobalt scale
GB/T 6283, Chemical products - Determination of water Karl·fischer method
(general method) (ISO 760-1978, NEQ)
GB/T 6678, General principles for sampling chemical products
GB/T 6680, General rules for sampling liquid chemical products
GB/T 6682-2008, Water for analytical laboratory use - Specification and test
methods (ISO 3696.1987, MOD)
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
4.4.2.3 Air. purified and dried by activated carbon, blue silica gel and 5A
molecular sieve.
4.4.2.4 Methanol. chromatographic pure.
4.4.2.5 Tetrahydrofuran. chromatographic pure.
4.4.2.6 γ-butyrolactone. chromatographic pure.
4.4.2.7 Dimethyl succinate. chromatographic pure.
4.4.2.8 1,4-pentanediol. chromatographic pure.
4.4.2.9 2-methyl-1,4-butanediol. chromatographic pure.
4.4.2.10 1,6-hexanediol. chromatographic pure.
4.4.2.11 Butanol. chromatographic pure.
4.4.2.12 2-methyl-tetrahydrofuran. chromatographic pure.
4.4.2.13 3-hydroxy-tetrahydrofuran. chromatographic pure.
4.4.2.14 Xylene. chromatographic pure.
4.4.2.15 1,4-butanediol. mass fraction is not less than 99.8%.
4.4.3 Instruments
4.4.3.1 Gas chromatograph. with flame ionization detector (FID), the
sensitivity and stability of the whole machine shall meet the relevant regulations
in GB/T 9722-2006.
4.4.3.2 Data processing system. chromatographic data processor or
chromatography workstation.
4.4.3.3 Sample injector. 10-μL micro syringe or auto sampler injector.
4.4.4 Chromatographic conditions
The recommended column and chromatographic operating conditions in this
Standard are shown in Table 2. Typical chromatograms and retention times of
components are in Annex A. Other chromatographic columns and
chromatographic operating conditions that can achieve equivalent separations
can also be used.
Take the arithmetic average of two parallel determination results as the report
result. The absolute difference between two parallel determinations is not
greater than 0.003%.
4.6 Determination of chromaticity
Determine according to the provisions of GB/T 3143.
5 Inspection rules
5.1 All items required in Clause 3 and specified in Table 1 are all exit-factory
inspection items. The exit-factory inspection shall be performed in batches.
5.2 1,4-butanediol for industrial use takes the amount of a storage tank or tank
car (ship) as one batch or the products of same mass as one batch.
5.3 The sampling of 1,4-butanediol for industrial use shall be performed
according to GB/T 6678, GB/T 6680. Take a representative sample with a
sample volume of not less than 400 mL and pack in two clean, dry glass bottles,
seal. Label it and indicate the product name, manufacturer's name, batch
number or production date, sampling date, sampling location, sampler's name,
etc. One bottle is for inspection, the other for future reference.
5.4 1,4-butanediol for industrial use shall be inspected by the quality
supervision and inspection department of manufacturer. The manufacturer shall
ensure that each batch of manufactured products conforms to the requirements
of this Standard and is accompanied by a quality certificate in a certain format,
including manufacturer's name and address, product name, product grade,
production date or lot number, net content, and reference to this Standard.
5.5 The determination of the test results is carried out according to the
comparison method of repair value in GB/T 8170. If one of the inspection results
does not meet the requirements of this Standard, it shall be re-sampled from
the twice-amount packaging unit for inspection. Even if only one indicator does
not meet the requirements of this Standard, the entire batch of products shall
be disqualified.
6 Marks, packaging, transport and storage
6.1 Marks
The packaging container of 1,4-butanediol for industrial use shall have obvious
fixed mark, indicating product name, manufacturer's name and address,
production lot number or date, net content, certificate of conformity, product
standard number, etc., and accompanying safety technical data sheet with the
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|