GB/T 24510-2017 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 24510-2017: Nickel alloy steel plates for low temperature pressure vessels Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete GB/T 24510: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 24510-2017 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Nickel alloy steel plates for low temperature pressure vessels
| Obsolete |
| GB 24510-2009 | English | 319 |
Add to Cart
|
3 days
|
[GB/T 24510-2009] 9%Nickel steel plates for pressure vessels with specified low temperature properties
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 24510-2017
GB/T 24510-2017: Nickel alloy steel plates for low temperature pressure vessels---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24510-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
H 46
Replacing GB/T 24510-2009
Nickel Alloy Steel Plates for
Low Temperature Pressure Vessels
Issued on: DECEMBER 29, 2017
Implemented on: SEPTEMBER 01, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Ordering Contents... 6
4 Size, Shape, Weight and Permissible Deviation ... 7
5 Technical Requirements ... 7
6 Test Methods ... 10
7 Inspection Rules ... 11
8 Package, Mark, Quality Certificate and Transportation ... 12
Appendix A (Informative) Grade Comparison List among Relevant Standards
... 13
Nickel Alloy Steel Plates for
Low Temperature Pressure Vessels
1 Scope
This Standard specifies the ordering contents, size, shape, weight and permissible
deviation, technical requirements, test methods, inspection rules, package, mark,
quality certificate and transportation of nickel alloy steel plates for low temperature
pressure vessels.
This Standard is applicable to the nickel alloy steel plates (hereinafter referred to as
steel plate) with thickness no greater than 150mm for the liquefied gas storage and
transportation device.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 222 Method for Determination of Permissible Tolerance of the Chemical
Composition of Steel Finished Product
GB/T 223.5 Steel and Iron - Determination of Acid-Soluble Silicon and Total Silicon
Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium
Carbonate Separation-Diphenyl Carbazide Photometric Method for the
Determination of Chromium Content
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-
Benzoy-N-Phenylhydroxylamine Extraction Photometric Method for the
Determination of Vanadium Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Neocuproine-Chloroform Extraction Photometric Method for the Determination of
Copper Content
GB/T 232 Metallic Materials - Bend Test
GB/T 247 General rule of package mark and certification for steel plates (sheets)
and strips
GB/T 709-2006 Dimension, Shape, Weight and Tolerances for Hot Rolled Sheets
and Strip
GB/T 2975 Steel and Steel Products - Location and Preparation of Samples and
Test Pieces for Mechanical Testing
GB/T 4336 Carbon and Low-Alloy Steel - Determination of Multi-Element Contents
-Spark Discharge Atomic Emission Spectrometric Method (Routine Method)
GB/T 5313 Steel Plates with through-Thickness Characteristics
GB/T 6803 Test Method for Drop-Weight Test to Determine Nil-Ductility Transition
Temperature of Ferritic Steels
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and
Judgement of Limiting Values
GB/T 13239 Metallic Materials - Tensile Testing At Low Temperatures
GB/T 17505 Steel and Steel Products General Technical Delivery Requirements
GB/T 20066 Steel and Iron-Sampling and Preparation of Samples for the
Determination of Chemical Composition
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content
Infrared Absorption Method after Combustion in an Induction Furnace (Routine
Method)
GB/T 20124 Steel and Iron - Determination of Nitrogen Content - Thermal
Conductimetric Method after Fusion in a Current of Inert Gas
GB/T 20125 Low-Alloy Steel - Determination of Multi-Element Contents -
Inductively Coupled Plasma Atomic Emission Spectrometric Method
NB/T 47013.3-2015 Nondestructive Testing of Pressure Equipment Part 3.
Ultrasonic Testing
3 Ordering Contents
The contract or ordering list purchasing products as per this Standard include the
following contents.
no greater than half thickness tolerance of the steel plate; ensure the minimum
thickness of the steel plate.
5.5.3 When the surface of the steel plate has defects, it is allowed to be removed by
the grinding method; the grinding position shall be smooth; ensure the minimum
thickness of the steel plate.
5.6 Ultrasonic test
The steel plate shall be ultrasonically tested one by one; the test method and
qualification level shall be determined through the negotiation between the supplier
and the purchaser. If they are not clear, they shall conform to the provisions of Level-I
in NB/T 47013.3-2015.
5.7 Particular requirements
5.7.1 According to the negotiation between supplier and purchaser, the steel plate can
be tested for dropping hammer, low temperature drawing, residual magnetism,
thickness direction performance. When taking the dropping hammer and low
temperature drawing tests, take two samples per group (totally two groups) from the
steel plate with the maximum thickness in each ordering batch.
5.7.2 According to the negotiation between supplier and purchaser, the steel plate can
also be inspected for other items.
6 Test Methods
6.1 The test methods for chemical compositions of steel shall conform to the provisions
of GB/T 223.5, GB/T 223.12, GB/T 223.14, GB/T 223.19, GB/T 223.23, GB/T 223.25,
GB/T 223.26, GB/T 223.62, GB/T 223.63, GB/T 223.64, GB/T 223.72, GB/T 223.78,
GB/T 223.79, GB/T 223.81, GB/T 223.84, GB/T 223.85, GB/T 223.86, GB/T 4336,
GB/T 20123, GB/T 20124, GB/T 2015.
6.2 The inspection items, sampling quantity, sampling method and test methods for
each batch of steel plates shall conform to the provisions of Table 3.
Table 3
SN Inspection items Sampling quantity/piece Sampling method Test method
1 Chemical composition (smelting analysis) 1/furnace GB/T 20066 See 6.1
2 Tensile test 1/batch GB/T 2975 GB/T 228.1
3 Bending test 1/batch GB/T 2975 GB/T 232
4 Impact test 3/batch GB/T 2975 GB/T 229
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 24510-2017 be delivered?Answer: The full copy PDF of English version of GB/T 24510-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 24510-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24510-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24510-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 24510-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24510-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 24510-2017?A step-by-step guide to download PDF of GB/T 24510-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 24510-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|