| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21418-2008 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
General specification for permanent magnet brushless motor system
| Valid |
GB/T 21418-2008
|
PDF similar to GB/T 21418-2008
Basic data | Standard ID | GB/T 21418-2008 (GB/T21418-2008) | | Description (Translated English) | General specification for permanent magnet brushless motor system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K24 | | Classification of International Standard | 29.160.30 | | Word Count Estimation | 25,238 | | Date of Issue | 2008-01-22 | | Date of Implementation | 2008-09-01 | | Quoted Standard | GB/T 191; GB 755-2000; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2423.5; GB/T 2423.10; GB/T 2828.1-2003; GB/T 2900.26; GB/T 2900.56; GB/T 4772.1; GB 4824-2004; GB/T 7345-1994; GB/T 7346; GB/T 10069.1; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 17626.4-1998; GB/T 17626.5-1999; GB 18211; GJB/Z 299B-1998 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2, 2008 (No. 115 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the permanent magnet brushless motor system and constitute a system of permanent magnet brushless motors, permanent magnet brushless motor drives the terms and definitions, operating conditions, basic requirements, test methods and acceptance criteria. This standard applies to non- scratch magnet motor system and constitute a system of permanent magnet brushless motors, permanent magnet brushless motor drive. | GB/T 21418-2008: General specification for permanent magnet brushless motor system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for permanent magnet brushless motor system
ICS 29.160.30
K24
National Standards of People's Republic of China
Permanent magnet brushless motor system General technical conditions
Posted 2008-01-22
2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
7 4 Operating Conditions
Frame 5 7
6 Basic requirements and test methods 7
7 special tests 10
8 nameplates and other information 14
9 15 security requirements
10 15 Inspection Rules
11 packaging and storage 18
Appendix A (informative) system block 19
Appendix B Test Method (informative) Thermal resistance and thermal time constant of 21
Foreword
This standard is based on the standard permanent magnet brushless motor system, it provides a permanent magnet brushless motor system and permanent magnet brushless electric system constitutes
Motivation, terms and definitions of permanent magnet brushless motor drive, operating conditions, the basic requirements, test methods and acceptance criteria. The standard reference
eqv IEC 60068-2-78.2001)
GB/T 2423.5 Electrical and Electronic Products Environmental Testing Part II. Test methods - Test Ea and guidance. Shock (GB/T 2423.5-
1995, idt IEC 60068-2-27. 1987)
GB/T 2423.10 Environmental testing for electric and electronic products Part II. Test methods - Test Fc and guidance. Vibration (sinusoidal)
(GB/T 2423.10-1995, idt IEC 60068-2-6. 1982)
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB/T 2900.26 Electrotechnical terminology motor control
GB/T 2900.56 Electrotechnical terminology automatic control
GB/T 4772.1 rotary motor size and power output rating - Part 1. Frame numbers 56 to 400 and flange numbers 55 to 1080
(GB/T 4772.1-1999, idt IEC 72-1.1991)
GB 4824-2004 industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
GB/T 7345-1994 micro-motor control basic technical requirements
GB/T 7346 motor control basic shape structure type
GB/T 10069.1 rotary motor noise measurement method and the measurement method of noise limits Engineering
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,
IDT)
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.2002, IDT)
GB/T 17626.4-1998 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test (IEC 61000-4-4.
1995, IDT)
|