GB/T 2040-2017 PDF in English
GB/T 2040-2017 (GB/T2040-2017, GBT 2040-2017, GBT2040-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 2040-2017 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Copper and copper alloy sheet
| Valid |
| GB/T 2040-2008 | English | 95 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Sheet of copper and copper alloy
| Obsolete |
| GB/T 2040-2002 | English | 399 |
Add to Cart
|
3 days
|
The sheet of copper and copper alloy
| Obsolete |
| GB/T 2040-1989 | English | 199 |
Add to Cart
|
2 days
|
Copper sheet
| Obsolete |
Standards related to (historical): GB/T 2040-2017
PDF Preview
GB/T 2040-2017: PDF in English (GBT 2040-2017) GB/T 2040-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.30
H 62
Replacing GB/T 2040-2008
Copper and copper alloy sheet
ISSUED ON. MAY 31, 2017
IMPLEMENTED ON. DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Requirements... 6
4 Test method ... 16
5 Inspection rules ... 17
6 Marking, packaging, transportation, storage and quality certificate ... 19
7 Order (or contract) content ... 19
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 2040-2008 “Sheet of copper and copper alloy”.
Compared with GB/T 2040-2008, the main changes in this Standard are as follows.
- ADD 5 designations, i.e. TFe0.1, TFe2.5, H66, HSn88-1, BZn18-26 and the
corresponding requirements;
- ADD the code name of copper and copper alloys;
- MODIFY the designation and state of alloys;
- MODIFY the specification range of pure copper, oxygen-free copper and TCr0.5
sheets;
- MODIFY the performance of some sheets;
- DELETE the provisions of Rockwell hardness;
- MODIFY the “Dimension measurement method” TO “The test method for
dimension of sheets is in accordance with the provisions of GB/T 26303.3”;
- ADD the reference to YS/T 482 “Methods for analysis of copper and copper alloys
- The atomic emission spectrometry” and YS/T 483 “Methods for analysis of
copper and copper alloys - X-Ray fluorescence spectrometric (wavelength
dispersive)”;
- MODIFY the tensile test sample number according to the provisions of GB/T
228.1-2010;
- ADD the provision of “The sampling method shall comply with the provisions of
YS/T 668; the sample for mechanical properties and process performance shall
be prepared according to the provisions of YS/T 815”.
This Standard is proposed by China Nonferrous Metals Industry Association.
The Standard is under the jurisdiction of National Technical Committee on Nonferrous
Metals of Standardization Administration of China (SAC/TC 243).
Drafting organizations of this Standard. Chinalco Luoyang Copper Co., Ltd., Ningbo
Xingye Shengtai Group Co., Ltd., Anhui Truchum Advanced Materials & Technology
Co., Ltd., Shanxi Chunlei Copper Co., Ltd., Tongling Jinvi Copper Co., Ltd., Shaoxing
Electric Co., Ltd., Kaimailong Precision Copper Sheets & Strips (Henan) Co., Ltd.,
Copper and copper alloy sheet
1 Scope
This Standard specifies the requirements, test methods, inspection rules and marking,
packaging, transportation, storage, quality certificates and order (or contract) contents
of copper and copper alloy sheets.
This Standard applies to wrought copper and copper alloy sheets for general purpose
(hereinafter referred to as sheets).
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the dated edition cited applies. For undated
references, the latest edition of the referenced document (including all amendments)
applies.
GB/T 228.1-2010 Metallic materials - Tensile testing - Part 1. Method of test at room
temperature
GB/T 232 Metallic materials - Bend test
GB/T 351 Metallic materials - Resistivity measurement method
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1. Test method
GB/T 5121 (all parts) Methods for chemical analysis of copper and copper alloys
GB/T 5231 Designation and chemical composition of wrought copper and copper
alloys
GB/T 6147 Test method for thermoelectric power of precision resistance alloys
GB/T 6148 Test method for temperature-resistance coefficient of precision
resistance alloys
GB/T 8888 Wrought heavy non-ferrous metal products - Packing, marking,
transportation, storing and certificate of quality
GB/T 17793 Wrought copper and copper alloy plate, sheet and strip for general
purposes - Dimensions and tolerances
GB/T 26303.3 Measuring methods for dimensions and shapes of wrought copper
and copper alloys - Part 3. Sheets and strips
YS/T 347 Copper and copper alloys - Estimation of average grain size
YS/T 478 The method for electrical conductivity measurement of copper and copper
alloys by use of eddy current
YS/T 482 Methods for analysis of copper and copper alloys - The atomic emission
spectrometry
YS/T 483 Methods for analysis of copper and copper alloys - X-Ray fluorescence
spectrometric (wavelength dispersive)
YS/T 668 The sampling method of physical and chemical testing for copper and
copper alloys
YS/T 815 Preparation method of test pieces for mechanical and technological
properties of copper and copper alloys
3 Requirements
3.1 Product classification
3.1.1 Designation, state and specification
The designation, state and specification of sheets shall comply with the provisions of
Table 1.
2010. The Vickers hardness test method shall comply with the provisions of GB/T
4340.1.
4.4 Bend test
The bend test method for sheets shall comply with the provisions of GB/T 232.
4.5 Grain size
The grain size test method for sheets shall comply with the provisions of YS/T 347.
4.6 Electrical properties
4.6.1 The resistivity test method for sheets shall comply with the provisions of GB/T
351 or YS/T 478, and the arbitration shall comply with the provisions of GB/T 351.
4.6.2 The resistance temperature coefficient test method for sheets shall comply with
the provisions of GB/T 6148.
4.6.3 The thermo-electromotive force test method for sheets shall comply with the
provisions of GB/T 6147.
4.7 Surface quality
The surface quality of sheets shall be inspected visually.
5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The sheets shall be inspected by the technical supervision department of the
supply party, to ensure that the product quality comply with the provisions of this
Standard (or the order contract); the quality certificate shall be filled.
5.1.2 The demand party shall inspect the products received in accordance with the
provisions of this Standard and the order (or contract). If the inspection result is
inconsistent with the provisions of this Standard and the order (or contract), the
demand party shall notify the supply party within 3 months after receiving the product,
to settle this issue through negotiation between the supply and demand parties. If
arbitration is required, arbitration sampling will be conducted at the demand party’s
jointly by the supply and demand parties.
5.2 Batching
The sheets shall be submitted for acceptance in batches, AND each batch shall be
composed of the same designation, state and specification. The weight of each batch
Electrical properties
Randomly take two sheets from each
batch, and randomly take one sample
from each sheet
3.7 4.6
Surface quality One by one 3.8 4.7
5.5 Determination of test results
5.5.1 When the chemical composition test results are not qualified, then the whole
batch is determined as disqualified.
5.5.2 When the dimensions and surface quality are not qualified, then the
corresponding sheet is determined as disqualified.
5.5.3 When the test results of mechanical properties, bend test, grain size and
electrical properties are not qualified, it shall, from this batch (including the sheet that
is determined disqualified), re-take double quantities of samples to conduct repeated
test for the corresponding disqualified item. If all the samples are qualified through
repeated tests, then the whole batch is determined as qualified; if there is still one
sample disqualified through repeated tests, then the whole batch is determined as
disqualified, or the supply party shall inspect one by one and deliver the qualified
sheets.
6 Marking, packaging, transportation, storage and
quality certificate
The markings, packaging, transportation, storage and quality certificates of the sheets
shall comply with the provisions of GB/T 8888.
7 Order (or contract) content
The order (or contract) for ordering the products listed in this Standard shall include
the following information.
a) Product name;
b) Designation;
c) State;
d) Dimension specifications;
e) Weight or number of sheets;
f) Allowable dimension deviation (for higher grade, advanced grade OR those
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|