GB/T 17477-2012 PDF English
Search result: GB/T 17477-2012_English: PDF (GB/T17477-2012)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 17477-2012 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Automotive gear lubricant viscosity classification
| Valid |
| GB/T 17477-1998 | English | 239 |
Add to Cart
|
2 days
|
Axle and manual transmission lubricant viscosity classification
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 17477-2012 Related standards: GB/T 17477-2012
PDF Preview: GB/T 17477-2012
GB/T 17477-2012: PDF in English (GBT 17477-2012) GB/T 17477-2012
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 75.100
E 31
Replacing GB/T 17477-1998
Automotive Gear
Lubricant Viscosity Classification
ISSUED ON. NOVEMBER 5, 2012
IMPLEMENTED ON. MARCH 1, 2013
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Viscosity Grades and Code Instructions ... 4
4 Detailed Classification ... 5
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 17477-1998 Axle and Manual Transmission Lubricant
Viscosity Classification. Compared with GB/T 17477-1998, this Standard has the major
changes as follows.
--- The standard name was changed from “Axle and Manual Transmission Lubricant
Viscosity Classification” to “Automotive Gear Lubricant Viscosity Classification”;
keep consistent with the standard name of reference standard SAE J306-2005
Automotive Gear Lubricant Viscosity Classification.
--- Add “NB/SH/T 0845 Determination of Viscosity Shear Stability of Transmission
Lubricants Using the Tapered Roller Bearing Rig” (see Clause 2);
--- Increase four viscosity grades of 80, 85, 110 and 190 (see Table 1 in Clause 4 of
this Edition; Table 1 of Clause 4 of 1998 Edition);
--- Add footnote c “after the test of NB/SH/T 0845 (20h), it shall also meet the limit
requirements” (see Table 1 of Clause 4);
--- Replace the connection symbol of the multi-level oil of “/” by “-” (see 3.2.2);
--- Delete the Appendix A (prompt appendix) “Typical Gear Lubricant Low
Temperature Viscosity (Brookfield Viscosity) – Temperature Chart” (see
Appendix A of 1998 Edition).
This Standard was prepared on the reference of American Society of Automotive
Engineer SAE J306. 2005 Automotive Gear Lubricant Viscosity Classification (English
Version); its technical contents are consistent with SAE J306. 2005.
This Standard was proposed by National Technical Committee for Standardization of
Petroleum Products and Lubricants (SAC/TC 280).
This Standard shall be under the jurisdiction of Petroleum Fuels and Lubricants
Subcommittee of National Technical Committee for Standardization of Petroleum
Products and Lubricants (SAC/TC 280/SC 1).
Drafting organization of this Standard. Sinopec Research Institute of Petroleum
Processing.
Drafting staff of this Standard. Xu Shuyan.
This Standard was first-time published in August 1998.
Automotive Gear
Lubricant Viscosity Classification
1 Scope
This Standard specifies the viscosity grade, code instruction, detailed classification of
automotive gear lubricant.
This Standard is applicable to the viscosity classification and marking of automotive
gear lubricant.
The viscosity grades in the Table 1 only specify the classification limits for automotive
gear lubricants from the aspects of rheological properties, other lubricant
characteristics are not considered.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 265 Petroleum Products - Determination of Kinematic Viscosity and
Calculation of Dynamic Viscosity
GB/T 11145 Standard Test Method for Measurement of Low-Temperature
Viscosity of Lubricants - Brookfield Viscometer Method
NB/SH/T 0845 Determination of Viscosity Shear Stability of Transmission
Lubricants Using the Tapered Roller Bearing Rig
3 Viscosity Grades and Code Instructions
3.1 Viscosity grades
This Standard classifies the viscosity grades according to the lubricant viscosity at the
high and low temperature.
3.2 Code instructions
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|