GB/T 17420-2020 PDF in English
GB/T 17420-2020 (GB/T17420-2020, GBT 17420-2020, GBT17420-2020)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 17420-2020 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Foliar microelement fertilizer
| Valid |
| GB/T 17420-1998 | English | 719 |
Add to Cart
|
3 days
|
Foliar microelement fertilizer
| Obsolete |
Standards related to (historical): GB/T 17420-2020
PDF Preview
GB/T 17420-2020: PDF in English (GBT 17420-2020) GB/T 17420-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.080
G 21
Replacing GB/T 17420-1998
Foliar microelement fertilizer
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Technical requirements ... 5
4 Sampling ... 5
5 Test method ... 6
6 Inspection rules ... 7
7 Marking and quality certificate ... 8
8 Packaging, transportation and storage ... 9
Foliar microelement fertilizer
1 Scope
This Standard specifies the technical requirements, sampling, test methods,
inspection rules, marking and quality certificate, packaging, transportation and
storage of foliar microelement fertilizer.
This Standard applies to foliar fertilizers based on microelements.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 4472, Determination of density and relative density for chemical
products
GB/T 6679, General rules for sampling solid chemical products
GB/T 6680, General rules for sampling liquid chemical products
GB/T 8170, Rules of rounding off for numerical values & expression and
judgment of limiting values
GB/T 8576, Determination of free water for compound fertilizers - Vacuum
oven method
GB/T 8577, Determination of free water for compound fertilizers - Karl
Fischer method
GB 18382, Fertilizer marking - Presentation and declaration
GB 38400, Limitation requirements of toxic and harmful substance in
fertilizers
HG/T 2843, Chemical fertilizer products - Standard volumetric, standard,
reagent and indicator solutions for chemical analysis
NY/T 1973, Water-soluble fertilizers - Determination of water insoluble matter
content and pH
Quickly mix the collected combined samples; reduce them to about 200 g (200
mL), and divide them into two clean, dry jars or polyethylene bottles with ground
stoppers; paste the labels, which indicate name of the manufacturer, product
name, batch number, sampling date, and name of the person who took the
sample. One bottle is used for product inspection; one bottle is sealed and
stored for two months for later use.
5 Test method
5.1 General provisions
The preparation of reagents, water and solutions that are used in this Standard,
when the specifications and preparation methods are not specified, shall be
implemented in accordance with the provisions of HG/T 2843.
5.2 Sample preparation
Perform according to the provisions of NY/T 1974.
5.3 Appearance inspection
Visually inspect.
5.4 Determination of microelement content
5.4.1 Preparation of sample solution
5.4.1.1 Preparation of sample solution of solid sample
Weigh about 0.2 g ~ 3 g of the sample (accurate to 0.000 1 g) from the sample
that is obtained in 5.2; place it in a 250 mL volumetric flask; add about 150 mL
of water; place it in a shaker at an oscillation frequency of (180±20) r/min to
shake for 30 minutes. After taking it out, use water to dilute to the mark; mix
well and filter dry; discard the first few milliliters of filtrate; wait for measurement.
5.4.1.2 Preparation of sample solution of liquid sample
From the sample that is obtained in 5.2, weigh about 0.2 g ~ 3 g of the sample
(accurate to 0.000 1 g); place it in a 250 mL volumetric flask; use water to fix
volume; mix well and dry filter; discard the first few milliliters of filtrate; use for
later test.
5.4.2 Test procedures
According to the provisions of NY/T 1974, the atomic absorption
spectrophotometry is used as the arbitration method for the content of copper,
required to be marked by other laws and regulations; the content of each
microelement that is marked on the package shall be ≥0.2% or 2 g/L.
7.2 The net content of each bag shall be marked with a single value, such as
100 g.
7.3 The product instructions shall be marked on the packaging container,
including but not limited to the following:
-- Applicable area, soil, crop, growth stage (or inapplicable area, soil, crop,
growth stage);
-- Usage and dosage;
-- Compatibility with other materials, incompatible materials, special
requirements for water quality, etc.;
-- Warning instructions (in use, based on the hazardous characteristics of the
product itself).
7.4 A two-dimensional code or barcode that is easy to identify can be used to
mark part of the product information.
7.5 If fertilizer additives other than the requirements of this Standard are
indicated on the product packaging, the name, function, content and
corresponding testing method standards of the additives shall be indicated on
the packaging container.
7.6 Each batch of products that pass the delivery inspection shall be
accompanied by a quality certificate, which includes: product name,
manufacturer name, production date (or batch number), microelement content,
water insoluble matter, pH value, moisture, number of this Standard, and
contents that shall be marked according to laws and regulations.
7.7 The rest shall be implemented in accordance with the provisions of GB
18382.
8 Packaging, transportation and storage
8.1 The net content of each bag (bottle) shall be indicated with a clear value,
such as 500 g (500 mL), 250 g (250 mL), 100 g (100 mL), 50 g (50 mL); the
relative error of the net content of each bottle (bag) shall not exceed ±1%. Other
packaging specifications which are agreed upon in the contract between the
supplier and the buyer can also be used.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|