GB/T 1412-2005 PDF in English
GB/T 1412-2005 (GB/T1412-2005, GBT 1412-2005, GBT1412-2005)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 1412-2005 | English | 115 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Pig iron used for spheroidal graphite cast iron
| Valid |
| GB/T 1412-1985 | English | 199 |
Add to Cart
|
2 days
|
Pig iron used for spheroidal graphite cast iron
| Obsolete |
Standards related to (historical): GB/T 1412-2005
PDF Preview
GB/T 1412-2005: PDF in English (GBT 1412-2005) GB/T 1412-2005
GB
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 77. 080. 10
H 41
Replacing GB 1412-1985
Pig iron used for spheroidal graphite cast iron
ISSUED ON: MAY 13, 2005
IMPLEMENTED ON: OCTOBER 1, 2005
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Technical requirements ... 6
4 Test methods ... 7
5 Inspection rules ... 8
6 Transportation and quality certificates ... 8
Pig iron used for spheroidal graphite cast iron
1 Scope
This standard specifies the technical requirements, test methods, inspection rules,
transportation, and quality certificates for pig iron used for spheroidal graphite cast iron.
This standard applies to pig iron used for spheroidal graphite cast iron.
2 Normative references
The provisions in the following documents become the provisions of this standard
through reference in this standard. For the dated references, the subsequent amendments
(excluding corrections) or revisions do not apply to this standard, however, parties who
reach an agreement based on this standard are encouraged to study if the latest versions
of these documents are applicable. For undated references, the latest editions of the
referenced documents apply to this standard.
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyryl
methane phosphomolybdate gravimetric method for the determination of
phosphorus content
GB/T 223.16 Methods for chemical analysis of iron, steel and alloy - The
chromotropic acid photometric method for the determination of titanium content
GB/T 223.29 Iron, steel and alloy - Determination of lead content - Carrier
precipitation-xylenol orange spectrophotometric method
GB/T 223.31 Iron, steel and alloy - Determination of arsenic content - Distillation-
molybdenum blue spectrophotometric method
GB/T 223.32 Methods for chemical analysis of iron, steel and alloy - The
hypophosphite reduction-iodimetric method for the determination of arsenic
content
GB/T 223.47 Methods for chemical analysis of iron, steel and alloy - The carrier
precipitation-molybdenum blue photometric method for the determination of
antimony content
GB/T 223.48 Methods for chemical analysis of iron, steel and alloy - The
semixylenol orange photometric method for the determination of bismuth content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The
extraction-absorption catalytic polarographic method for the determination of
manganese content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric
acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The
ammonium phosphomolybdate volumetric method for the determination of
phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl
acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Iron, steel and alloy - Determination of manganese content - Sodium
(potassium) periodate spectrophotometric method
GB/T 223.64 Iron, steel and alloy - Determination of manganese content - Flame
atomic absorption spectrometric method
GB/T 223.67 Iron, steel and alloy - Determination of sulfur content - Methylene
blue spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium
iodate titration method after combustion in the pipe furnace for the determination
of sulfur content
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The
gravimetric method after combustion in the pipe furnace for the determination of
carbon content
GB/T 223.72 Iron, steel and alloy - Determination of sulfur content - Gravimetric
method
GB/T 719 Pig iron - Sampling for chemical analysis
YB/T 081 Rule for rounding off of numerical values and judgment of testing values
for technical standards of metallurgy
ISO 4935 Steel and iron - Determination of sulfur content - Infrared absorption
method after combustion in an induction furnace
ISO 9556 Steel and iron - Determination of total carbon content - Infrared
absorption method after combustion in an induction furnace
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|