Powered by Google www.ChineseStandard.net Database: 189759 (14 Jul 2024)

GB 38449-2019 PDF in English


GB 38449-2019 (GB38449-2019) PDF English
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB 38449-2019English110 Add to Cart 0-9 seconds. Auto-delivery. Minimum allowable values of energy efficiency and energy efficiency grade of regenerative rolling reheating furnace Valid

PDF Preview

Standards related to: GB 38449-2019

GB 38449-2019: PDF in English

GB 38449-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum allowable values of energy efficiency and
energy efficiency grade of regenerative rolling
reheating furnace
ISSUED ON: DECEMBER 31, 2019
IMPLEMENTED ON: JULY 01, 2020
Issued by: State Administration for Market Regulation e;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 4 
4 Energy efficiency grade ... 5 
5 Technical requirements ... 7 
6 Test methods ... 7 
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of
Standardization Administration of the People's Republic of China.
The drafting organizations of this Standard: University of Science and
Technology Beijing, Shenwu Technology Group Co., Ltd., China National
Institute of Standardization, Beijing Dingxin Ganglian Science and Technology
Collaborative Innovation Research Institute, Metallurgical Industry Planning
Institute, Beijing-Tianjin-Hebei Iron and Steel Alliance (Qian'an) Collaborative
Innovation Research Institute, CECEP Consulting Co., Ltd.
Main drafters of this Standard: Pan Chongchao, Xia Dehong, Wu Daohong,
Chen Haihong, Li Xinchuang, Chang Yujie, Song Fangfang, Jiang Zeyi, Liu
Yusong, Xiong Chao, Jiang Binfan, Song Tiejun, Zhang Hongwei, Tian Zhibin.
Minimum allowable values of energy efficiency and
energy efficiency grade of regenerative rolling
reheating furnace
1 Scope
This Standard specifies energy efficiency grade, minimum allowable values of
energy efficiency and test methods of regenerative rolling reheating furnace.
This Standard is applicable to continuously-running regenerative rolling
reheating furnace that uses blast furnace gas and mixed gas as fuel, including
pusher-type reheating furnace, walking-type reheating furnace and rotary
hearth reheating furnace.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 13338, Basic rules for the measurement and calculation of thermal
equilibrium of fuel-fired furnace in industry
GB 17167, General principle for equipping and managing of the measuring
instrument of energy in organization of energy using
GB/T 17195, Industrial furnace terminology
GB 50486, Code for design of industrial furnaces in iron & steel works
YB/T 4209, Regenerative combustion technical specification of iron and steel
industry
YB/T 4242, Technical specification energy saving design for reheating
furnace of steel rolling in iron and steel works
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.