GB 37478-2025 PDF English
US$125.00 · In stock · Download in 9 secondsGB 37478-2025: Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 37478: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 37478-2025 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting
| Valid |
| GB 37478-2019 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 37478-2025
GB 37478-2025: Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB37478-2025
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
CCS F 01
Replacing GB 37478-2019
Minimum Allowable Values of Energy Efficiency and Energy
Efficiency Grades of LED Luminaires for Road and Tunnel
Lighting
Issued on: MAY 30, 2025
Implemented on: JUNE 1, 2026
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Technical Requirements... 5
5 Test Methods... 7
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives
for Standardization - Part 1.Rules for the Structure and Drafting of Standardizing Documents.
This document serves as a replacement for GB 37478-2019 Minimum Allowable Values of
Energy Efficiency and Energy Efficiency Grades of LED Luminaries for Road and Tunnel
Lighting. In comparison with GB 37478-2019, apart from structural adjustments and editorial
modifications, the main technical changes are as follows.
a) The rated power supply voltage range for applicable products is modified (see Chapter
1; Chapter 1 of Version 2019);
b) The term and definition of “standby power” are added (see 3.4);
c) The provisions on the energy efficiency grades of LED luminaires for road and tunnel
lighting are modified (see 4.1.2 and 4.1.3; 4.1 and 4.2 of Version 2019);
d) The requirements for lumen maintenance are deleted (see 4.3 of Version 2019);
e) The requirements for the color temperature deviation of the rated correlated color
temperature cutoff points of LED luminaires for road and tunnel lighting are added
(see 4.1.4);
f) The requirements for the standby power of LED luminaires for road and tunnel
lighting are added (see 4.4);
g) The test methods are modified; the test voltage and test requirements for dimming
products and color temperature adjustable products are added; the test method for the
standby power of LED luminaires for road and tunnel lighting is added; the test
method for lumen maintenance is deleted (see 5.1 and 5.2; 5.2 of Version 2019).
Please be noted that certain content of this document may involve patents. The institution
issuing this document does not undertake the responsibility of identifying these patents.
This document was proposed by and shall be under the jurisdiction of National Standardization
Administration.
The issuing of the previous versions.
---First issued in 2019 as GB 37478-2019.This is the first revision.
Minimum Allowable Values of Energy Efficiency and Energy
Efficiency Grades of LED Luminaires for Road and Tunnel
Lighting
1 Scope
This document specifies the energy efficiency grades, minimum allowable value of energy
efficiency and test methods for LED luminaires for road and tunnel lighting.
This document applies to LED luminaires for road and tunnel lighting with a rated power supply
voltage not exceeding 1,000 V (including LED light sources and their control gear but excluding
interconnected control components that can be independently installed or other accessories with
non-lighting related functions).
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 24826 General Lighting - Light Emitting Diode (LED) Products and Related Equipment
- Terms and Definitions
GB/T 39018 Intelligent Lighting Equipment - Non-active Mode Power Measurement
GB/T 39394 Test Method for LED Lamps, LED Luminaires and LED Modules
3 Terms and Definitions
The terms and definitions defined in GB/T 24826 and the following are applicable to this
document.
3.1 LED luminaire
A luminaire containing one or more LED light sources.
[source. GB/T 24826-2016, 3.17]
3.2 luminous efficacy of LED luminaire
Under the test conditions specified in the standard, the ratio of the initial luminous flux emitted
by an LED luminaire to the input power.
3.3 minimum allowable value of energy efficiency of LED luminaire
Under the test conditions specified in the standard, the minimum allowable value of the
luminous efficacy of an LED luminaire.
3.4 standby power
In standby mode, the average power consumption of an LED luminaire.
NOTE 1.standby mode is a mode of the control gear in which the control gear is connected to the
power supply voltage and the lighting function is turned off, but can be turned on by an
external trigger signal rather than a network trigger signal.
NOTE 2.an external trigger signal can be a sensor or timer.
4 Technical Requirements
4.1 Energy Efficiency Grades
4.1.1 The energy efficiency of LED luminaires for road and tunnel lighting is divided into 3
grades, with Grade 1 being the highest efficiency.
4.1.2 The luminous efficacy of each grade of LED luminaires for road lighting shall not be
lower than those specified in Table 1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 37478-2025 be delivered?Answer: The full copy PDF of English version of GB 37478-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 37478-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 37478-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 37478-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 37478-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 37478-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 37478-2025?A step-by-step guide to download PDF of GB 37478-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 37478-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |