GB 31604.16-2016 PDF in English
GB 31604.16-2016 (GB31604.16-2016) PDF English
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB 31604.16-2016 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Method for analysis of hygienic standard of unsaturated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials
| Valid |
Standards related to (historical): GB 31604.16-2016
PDF Preview
GB 31604.16-2016: PDF in English GB 31604.16-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National Food Safety Standard -
Food contact materials and articles -
determination of styrene and ethylbenzene
ISSUED ON. OCTOBER 19, 2016
IMPLEMENTED ON. APRIL 19, 2017
Issued by. National Health and Family Planning Commission of the PRC
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
1 Scope .. 4
2 Principles ... 4
3 Reagents and materials .. 4
4 Instruments and equipment ... 6
5 Analytical procedures ... 6
6 Analysis results expression ... 8
7 Precision ... 8
8 Others ... 9
Appendix A Gas chromatogram of the standard solution ... 10
Foreword
This Standard replaces “Part 4.4 - Ethylbenzene compounds” of GB/T 5009.98-
2003 “Method for analysis of hygienic standard of unsaturated polyester resin
and glass fibre reinforced plastics used as food containers and packaging
materials”, “Part 6 - Styrene, ethylbenzene, and other volatile components” of
GB/T 5009.59-2003 “Method for analysis of hygienic standard of polystyrene
resin for food packaging”.
As compared with “Part 6 - Styrene, ethylbenzene, and other volatile
components” of GB/T 5009.59-2003, the main changes of this Standard are as
follows.
- CHANGE the Standard’s name to “National Food Safety Standard - Food
contact materials and articles - determination of styrene and ethylbenzene”;
- MODIFY the type of chromatographic column;
- ADD the method for determination of insoluble samples.
National Food Safety Standard -
Food contact materials and articles -
determination of styrene and ethylbenzene
1 Scope
This Standard specifies the gas chromatography method for determination of
styrene and ethylbenzene in food contact materials and articles.
This Standard applies to the determination of styrene and ethylbenzene in
polystyrene products, unsaturated polyester resin, and its glass fiber reinforced
plastic products.
2 Principles
After extracting the sample with carbon disulfide, INJECT the sample into gas
chromatography. Styrene, ethylbenzene, internal standard n-dodecane, and
other components are separated in the chromatographic column. USE
hydrogen flame ionization detector to detect; and USE internal standard method
to quantify.
3 Reagents and materials
3.1 Reagent
Carbon disulfide (CS2, CAS Number. 75-15-0). chromatographically pure.
3.2 Standards
3.2.1 Styrene (C8H8, CAS Number. 100-42-5). The purity shall be greater than
99.5%. Or the reference material certified by the state and awarded a Certificate
of Reference Material.
3.2.2 Ethylbenzene (C8H10, CAS Number. 100-41-4). The purity shall be greater
than 99.5%. Or the reference material certified by the state and awarded a
Certificate of Reference Material.
3.2.3 N-dodecane (C12H26, CAS Number. 112-40-3). The purity shall be greater
than 99%. Or the reference material certified by the state and awarded a
Certificate of Reference Material.
5 mL of carbon disulfide; then ADD 1.0 mL of internal standard intermediate
solution of n-hexane into each volumetric flask; USE carbon disulfide to dilute
them; and SHAKE well to obtain a working solution. The concentration of
styrene and ethylbenzene is 1.0 μg/mL, 5.0 μg/mL, 10.0 μg/mL, 20.0 μg/mL,
50.0 μg/mL, 100.0 μg/mL, respectively. The internal standard concentration is
50 μg/mL. The storage conditions of the solution are the same as those under
3.3.1.
4 Instruments and equipment
4.1 Gas chromatograph. Equipped with hydrogen flame ionization detector
(FID).
4.2 Analytical balance. sensitivity is 0.0001 g.
4.3 Ultrasonic cleaning machine.
4.4 Cryogenic lapping instrument.
4.5 Conical flask. 25 mL.
5 Analytical procedures
5.1 Sample processing
The samples that are soluble in carbon disulfide shall be weighed directly. The
samples that are insoluble in carbon disulfide shall be first crushed by cutting
tools such as a cryogenic lapping instrument or scissors, and then weighed
after being smaller than 1 mmX1 mm. When cutting a sample, do not heat or
soften it.
5.2 Preparation of sample solution
For samples that are soluble in carbon disulfide, WEIGH 0.5 g (accurate to
0.001 g) of the sample into a 25 mL volumetric flask; TRANSFER 10 mL of
carbon disulfide to the volumetric flask and ADD 1.0 mL of internal standard
intermediate solution. Let stand until the sample is dissolved, USE carbon
disulfide to dilute it to volume. For samples that are insoluble in carbon disulfide,
WEIGH 0.5 g (accurate to 0.001 g) of the sample into a 25 mL conical flask and
TRANSFER 10 mL of carbon disulfide to the conical flask. After capping, USE
an ultrasonic cleaning machine to extract for 20 min and TAKE the supernatant
into a 25 mL volumetric flask. Then, by the same method, USE 10 mL of carbon
disulfide to extract again; COMBINE the two supernatants in the 25 mL
volumetric flask; and ADD 1.0 mL of internal standard intermediate solution to
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|