GB 1903.53-2021 PDF English
US$170.00 · In stock · Download in 9 secondsGB 1903.53-2021: National food safety standard - Food Nutrient Fortifier - D-calcium pantothenate Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 1903.53-2021 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
National food safety standard - Food Nutrient Fortifier - D-calcium pantothenate
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 1903.53-2021
GB 1903.53-2021: National food safety standard - Food Nutrient Fortifier - D-calcium pantothenate---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB1903.53-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National Food Safety Standard - Food Nutrient
Fortifier - D-calcium pantothenate
ISSUED ON: SEPTEMBER 07, 2021
IMPLEMENTED ON: MARCH 07, 2022
Issued by: National Health Commission of the People's Republic of
China;
State Administration for Market Regulation.
Table of Contents
1 Scope ... 3
2 Chemical name, molecular formula, structural formula and relative molecular
mass ... 3
3 Technical requirements ... 3
Appendix A Inspection methods ... 5
Appendix B Infrared spectrum of D-calcium pantothenate standard ... 13
Appendix C Chromatogram ... 14
National Food Safety Standard - Food Nutrient
Fortifier - D-calcium pantothenate
1 Scope
This Standard applies to the food nutrient fortifier D-calcium pantothenate,
which is obtained by acylation reaction of β-alanine calcium and D-pantoate
lactone.
2 Chemical name, molecular formula, structural
formula and relative molecular mass
2.1 Chemical name
D-(+)-N-(2,4-dihydroxy-3,3-dimethylbutyryl)-β-alanine calcium
2.2 Molecular formula
C18H32CaN2O10
2.3 structural formula
2.4 Relative molecular mass
476.54 (according to the international relative atomic mass in 2018)
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall be in accordance with Table 1.
Appendix A
Inspection methods
A.1 General provisions
The reagents and water used in this Standard refer to analytical reagents and
grade-3 water that is specified in GB/T 6682, when other requirements are not
indicated. The standard solution, the standard solutions, preparations and
products for impurity determination, which are used in the test, are all prepared
in accordance with the provisions of GB/T 601, GB/T 602, and GB/T 603, when
no other requirements are specified. The solution used in the test, if not
indicated which solvent is used, refers to aqueous solution.
A.2 Identification test
A.2.1 Reagents and materials
A.2.1.1 Sodium hydroxide solution: 43 g/L.
A.2.1.2 Copper sulfate solution: 125 g/L.
A.2.1.3 Phenolphthalein indicator solution: 10 g/L.
A.2.1.4 Hydrochloric acid solution: c(HCl) = 1 mol/L.
A.2.1.5 Ferric trichloride solution: 90 g/L.
A.2.1.6 Ammonium oxalate solution: 35 g/L.
A.2.1.7 Glacial acetic acid.
A.2.1.8 Hydrochloric acid.
A.2.1.9 Potassium bromide: spectrally pure, dry product.
A.2.2 Identification method
A.2.2.1 Weigh about 50 mg of the sample; add 5 mL of sodium hydroxide
solution (A.2.1.1); shake; add 2 drops of copper sulfate solution (A.2.1.2), and
it appears blue-purple.
A.2.2.2 Weigh about 50 mg of the sample; add 5 mL of sodium hydroxide
solution (A.2.1.1); shake; boil for 1 min; let cool; add 1 drop of phenolphthalein
indicator solution (A.2.1.3); add hydrochloric acid solution (A.2.1.4) until the
solution fades; then, add another 0.5 mL of hydrochloric acid solution (A.2.1.4);
add 2 drops of ferric trichloride solution (A.2.1.5), and it appears bright yellow.
A.2.2.3 The identification reaction of the calcium salt in the aqueous solution of
this product: Weigh 0.5 g of the sample; add 5 mL of water to dissolve; add
ammonium oxalate solution (A.2.1.6), and a white precipitate appears; the
precipitate is insoluble in glacial acetic acid; but it is soluble in hydrochloric acid.
A.2.2.4 Infrared spectroscopy: use potassium bromide pellet technique, to test
according to GB/T 6040. The infrared spectrum of the sample shall be
consistent with the infrared spectrum of the D-calcium pantothenate standard.
Refer to Figure B.1 in Appendix B for the standard infrared spectrum of D-
calcium pantothenate.
A.2.2.5 Clarity: Weigh about 1.00 g of the sample; add 20 mL of water to
dissolve; the solution is clear and colorless.
A.2.2.6 Solubility: easily soluble in water and glycerin; slightly soluble in ethanol;
insoluble in trichloromethane or ether.
A.3 Determination of D-calcium pantothenate content (on a dry basis)
A.3.1 Method summary
Use high performance liquid chromatography for determination, C18
chromatographic column for separation, UV detector for detection, and the peak
area external standard method to quantitatively calculate the content of D-
calcium pantothenate in the sample.
A.3.2 Reagents and materials
A.3.2.1 Acetonitrile: chromatographically pure.
A.3.2.2 Disodium hydrogen phosphate.
A.3.2.3 Sodium hydroxide solution: 43 g/L.
A.3.2.4 Sodium dihydrogen phosphate solution: Weigh 3.2 g of sodium
dihydrogen phosphate (A.3.2.2) into a 1 L volumetric flask; use water to dilute
to the mark; mix well. Use sodium hydroxide solution (A.3.2.3) to adjust pH to
5.5.
A.3.2.5 D-sodium pantoate (CAS: 60979-68-2): content ≥97.0%.
A.3.2.6 D-calcium pantothenate standard (CAS:137-08-6): content ≥99.0%.
A.3.3 Instruments and apparatuses
A.4.2.2 Ethylene Diamine Tetraacetic Acid standard titration solution: c(EDTA)
= 0.05 mol/L.
A.4.2.3 Calcium purpurin indicator: Take 0.1 g of calcium purpurin; add 10 g of
anhydrous sodium sulfate; grind evenly, to get it.
A.4.3 Analysis steps
Weigh 0.5 g of the sample (accurate to 0.000 1 g); add 100 mL of water to
dissolve; add 15 mL of sodium hydroxide solution (A.4.2.1) and about 0.1 g of
calcium purpurin indicator (A.4.2.3); use Ethylene Diamine Tetraacetic Acid
standard titration solution (A.4.2.2) to titrate, until the solution turns from purple
to pure-blue.
A.4.4 Calculation results
The mass fraction w2 of calcium content (on a dry basis) is calculated according
to Formula (A.2).
Where:
V2 – the volume of the Ethylene Diamine Tetraacetic Acid standard titration
solution that is consumed by the sample solution, in milliliters (mL);
c3 – the concentration of the Ethylene Diamine Tetraacetic Acid standard
titration solution, in moles per liter (mol/L);
M – the molar mass of calcium, in grams per mole (g/mol), M(Ca) = 40.08;
m2 – mass of the sample, in grams (g);
X3 – loss on drying of the sample, mass fraction, %.
Express the calculation result to one decimal place. The absolute difference of
two independent test results under repeatability cannot exceed 0.6% of the
arithmetic mean value.
A.5 Determination of specific rotation
A.5.1 Instruments and apparatuses
A.5.1.1 Polarimeter.
A.5.1.2 Polarimetry tube.
A.5.2 Analysis steps
potassium mercuric iodide test solution (A.7.1.2); leave it for 1 min; if there is
no turbidity, it means that it passes the test.
A.8 Determination of alkalinity
A.8.1 Reagents and materials
A.8.1.1 Hydrochloric acid solution: 0.1 mol/L.
A.8.1.2 Phenolphthalein indicator solution: 10 g/L.
A.8.2 Analysis steps
Weigh about 1.0 g of the sample (accurate to 0.01 g); add 20 mL of carbon
dioxide-free water to dissolve; immediately add 1 mL of hydrochloric acid
solution (A.8.1.1) and 0.05 mL of phenolphthalein indicator solution (A.8.1.2); if
there is no pink color within 5 s, the test is passed.
A.9 Determination of loss on drying
Weigh 2.0 g ~ 5.0 g of the sample (accurate to 0.000 1 g); the following
operations are the same as the Method 1 of GB 5009.3-2016.
A.10 Determination of chloride
A.10.1 Reagents and materials
A.10.1.1 Nitric acid
A.10.1.2 Hydrochloric acid standard titration solution: 0.001 4 mol/L.
A.10.1.3 Nitric acid solution: Take 105 mL of nitric acid (A.10.1.1); add water to
dilute to 1 000 mL; shake well.
A.10.1.4 Silver nitrate solution: 0.1 mol/L.
A.10.2 Analysis steps
Weigh about 2.5 g of the sample (accurate to 0.000 1 g) into a 50 mL volumetric
flask; add 30 mL of boiling water to dissolve; dilute to the mark, as the test liquid.
Take 5 mL of the test solution; add 10 mL of boiled water; add 6 mL of nitric acid
solution (A.10.1.3); mix well, pour the mixed solution into a colorimetric tube
that contains 1 mL of silver nitrate solution (A.10.1.4); shake well, as the sample
solution. Take another 1 mL of hydrochloric acid standard titration solution
(A.10.1.2); add 14 mL of boiled water; add 6 mL of nitric acid solution (A.10.1.3);
mix well; pour the mixed solution into a colorimetric tube that contains 1 mL of
silver nitrate solution (A.10.1.4); shake well, as the control solution. After placing
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 1903.53-2021 be delivered?Answer: The full copy PDF of English version of GB 1903.53-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 1903.53-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 1903.53-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 1903.53-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 1903.53-2021?A step-by-step guide to download PDF of GB 1903.53-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 1903.53-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|