Path: Home > GB > Page178 > GB 11562-2025 || Home > Standard_List > GB > Page178 > GB 11562-2025
GB 11562-2025 English PDF
Price & DeliveryUS$260.00 · In stock · Download in 9 secondsGB 11562-2025: Requirements and measurement methods of light-duty vehicles forward visibility for drivers Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
GB 11562: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 11562-2025 | English | 260 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Requirements and measurement methods of light-duty vehicles forward visibility for drivers
| Valid |
| GB 11562-2014 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Motor vehicles -- Forward visibility for drivers -- Requirements and measurement methods
| Valid |
| GB 11562-1994 | English | 185 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Motor vehicles-Forward visibility for drivers-Requirements and measurement methods
| Obsolete |
| GB 11562-1989 | English | RFQ |
ASK
|
3 days
|
Passenger cars--Forward visibility for drivers
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 11562-2025
GB 11562-2025: Requirements and measurement methods of light-duty vehicles forward visibility for drivers
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB11562-2025
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.60
CCS T 26
Replacing GB 11562-2014
Requirements and Measurement Methods of Light-Duty
Vehicles Forward Visibility for Drivers
Issued on: DECEMBER 31, 2025
Implemented on: JANUARY 1, 2027
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 5
4 Technical Requirements... 11
5 Measurement Conditions... 15
6 Methods for Measuring Driver's Visibility... 17
7 Judgment of the Same Type... 18
8 Implementation of the Standard... 19
Appendix A (Normative) Method for Determining Dimensional Relationships Between
Automotive Primary Reference Marks and a Three-Dimensional Reference Grid... 20
Bibliography... 22
Requirements and Measurement Methods of Light-Duty
Vehicles Forward Visibility for Drivers
1 Scope
This Document specifies the requirements and measurement methods for the direct field of
vision within a 180° range in front of the driver.
This Document applies to M1 and N1 category vehicles.
2 Normative References
The provisions in following documents become the essential provisions of this Document
through reference in this Document. For the dated documents, only the versions with the dates
indicated are applicable to this Document; for the undated documents, only the latest version
(including all the amendments) is applicable to this Document.
GB 11555 Technical specification for demisting and defrosting systems of motor vehicles-
windshield
GB/T 29120 Procedure for H-point and R-point determination
GB/T 46926-2025 Technical requirements and testing methods for field of vision assistant
system of light-duty vehicles
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in GB/T 29120 apply.
3.1 Three-dimensional reference grid
The vehicle manufacturer establishes a coordinate system during the initial design phase,
consisting of three orthogonal reference planes (see Figure A.1).
X-reference plane - a vertical plane passing through the centers of the left and right front wheels
and perpendicular to the Y-reference plane;
Y-reference plane - the plane of longitudinal symmetry of the vehicle;
4 Technical Requirements
4.1 The transparent area of the windscreen shall include at least the following windscreen datum
points (as shown in Figure 1).
--- Datum point a, horizontally forward and 17° to the left of V1 point;
--- Datum point b, 7° upward along the vertical plane forward of the V1 point;
--- Datum point c, 5° downward along the vertical plane forward of the V2 point;
--- On the other side of the vehicle's longitudinal symmetry plane, three additional auxiliary
datum points a', b', and c' shall be added, symmetrical to datum points a, b, and c.
4.2 The binocular obstruction angle of each A pillar shall not exceed 6° (as shown in Figure 3).
For vehicles with bulletproof features, this angle shall not exceed 10°. If the A-pillars on driver's
side and passenger's side are symmetrical relative to the vehicle's central longitudinal vertical
plane, the angle of obstruction of the A pillar on the passenger's side shall not need to be
measured again.
4.3 Each vehicle should not have more than two A pillars.
4.4 Within the driver's forward field of vision of 180°, in the range below the horizontal plane
passing through V1 and above the three planes passing through V2 (all three planes form a 4°
angle downwards with the horizontal plane; one plane perpendicular to the Y reference plane
and the other two planes perpendicular to the X reference plane), there shall be no obstructions
other than those caused by the A pillar, fixed or movable exhaust vents, triangular window
dividers, external radio antennas, rearview mirrors, and windscreen wipers, as well as the
requirements specified in 4.7 to 4.9 and the following situations (as shown in Figure 6).
a) On the windscreen, for the transparent area outside area A specified in 5.5, there shall be
embedded radio antenna wires with a width no greater than 0.5 mm and printed radio
antenna wires with a width no greater than 1.0 mm;
b) On the windscreen, for area A specified in 5.5, three radio antenna wires with a diameter
less than 0.5 mm are permitted to enter;
c) Vertical defrosting and defogging leads with the maximum visible width of 0.03 mm and
a minimum spacing of 1.25 mm; or horizontal defrosting and defogging leads with a
maximum visible width of 0.03 mm and a minimum spacing of 2.0 mm.
4.5 For camera-monitor systems, the exemption in 4.4 applies to the camera and its mounting
bracket and housing to the exterior of the vehicle. Camera-monitor systems used to replace
interior rearview mirrors shall also be exempt.
4.6 For vehicles where a camera-monitor system replaces a rearview mirror, the exemption in
4.4 also applies to the monitor if the obstruction of the camera-monitor system to the direct
field of vision does not exceed the obstruction range of the corresponding exterior rearview
mirror (including its housing and bracket) to the field of vision.
4.7 Obstruction of the dashboard on the upper edge of the steering wheel and within the area of
steering wheel is permissible if a plane passing through V2 and perpendicular to the Y-reference
plane and tangent to the upper edge of the steering wheel is inclined downwards at least 1°
relative to the horizontal plane.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 11562-2025 be delivered?Answer: The full copy PDF of English version of GB 11562-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 11562-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 11562-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 11562-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 11562-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 11562-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 11562-2025?A step-by-step guide to download PDF of GB 11562-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as USD, Euro, KRW, JPY, AUD, CAD, RMB, IDR, INR, THB, HKD etc.).
Step 2: Search keyword "GB 11562-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 | Steps 4~6 | Step 7 | Step 8 | Step 9
|