HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (29 Sep 2024)

GB/T 11563-1995 PDF in English


GB/T 11563-1995 (GB/T11563-1995, GBT 11563-1995, GBT11563-1995)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 11563-1995English105 Add to Cart 0-9 seconds. Auto-delivery. Motor vehicles--Procedure for H-point determination Obsolete
GB/T 11563-1989EnglishRFQ ASK 3 days Motor vehicles--Procedure for H point determination Obsolete
Standards related to (historical): GB/T 11563-1995
PDF Preview

GB/T 11563-1995: PDF in English (GBT 11563-1995)

GB/T 11563-1995 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 T 26 Motor vehicles - Procedure for H-point determination ISSUED ON. NOVEMBER 16, 1995 IMPLEMENTED ON. MAY 01, 1996 Issued by. National Technical Supervision Bureau Table of Contents 1 Subject content and scope of application ... 3 2 Terms ... 3 3 Description of the three-dimensional H-point machine ... 5 4 Installation procedure for the three-dimensional H-point machine ... 6 Motor vehicles - Procedure for H-point determination This Standard is equivalent to the International Standard ISO 6549-1980 “Road vehicles - Procedure for H-point determination”. 1 Subject content and scope of application This Standard specifies the procedure for determining the H-point position of a seat using a three-dimensional H-point machine. This Standard applies to the design and inspection of any motor vehicles of which the vertical distance between the driver heel point and the R-point is less than 550 mm, and the torso angle is greater than 5° or of which the angle between the thigh centreline as indicated by the thigh bar and the horizontal line is greater than 5°. 2 Terms 2.1 Three-dimensional H-point machine Device used for the determination of the H-point of a seat. 2.2 H-point Pivot center of the torso and thigh of the three-dimensional H-point machine, which is located on the centreline of the device which is between the H-point sight buttons on either side of the H-point machine. 2.2.1 “R-point” refers to “seating reference point” It refers to the design H-point specified by the manufacturer, which a. establishes the rearmost normal driving or riding position of each designated seating position as specified by the manufacturer, which accounts for all modes of adjustment (horizontal, vertical and tilt) that are available for the seat; b. has coordinates established with respect to the designed vehicle structure; c. simulates the position of the pivot centre of the human torso and thigh; d. is the reference point for placing a two-dimensional body model; ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.