CNCA C11-04-2014 PDF English
Search result: CNCA C11-04-2014_English: PDF (CNCAC11-04-2014)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| CNCA C11-04-2014 | English | 220 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
China Compulsory Certification Implementation Rules - Motor vehicle safety-belts
| |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): CNCA C11-04-2014 Related standards: CNCA C11-04-2014
PDF Preview: CNCA C11-04-2014
CNCA C11-04-2014: PDF in English CNCA-C11-04.2014
CNCA / CCC
Serial No.. CNCA-C11-04.2014
CNCA-C11-04-2014
Compulsory Product Certification Implementation Rules -
Car Seat Belts
Issued on. August 21, 2014 Effective on. January 1, 2015
Issued by. Certification and Accreditation Administration of the People’s
Republic of China (CNCA)
He is now the Sales Manager (Founder and Managing Director) at
expertise and hands-on working experiences, through his then-employment as
“China Certification Program Manager” at BlackBerry Beijing, and “Product
Safety & Compliance (PS&C) Manager” at Motorola Singapore.
- CNCA / China Compulsory Certification (CCC) regulations.
- Hands-on program experience with regulator CNCA for CCC mark’s
compliance, approval and management.
- Was an authorized representative by then-employer BlackBerry (RIM) to
liaise with Chinese regulators, authorities, certification bodies and
designated laboratories – including CNCA, CQC, Beijing Communication
Authority, Beijing Administration of Quality Supervision Inspection and
Quarantine.
- Hands-on program experience with certification body CQC for
“certification entrusting”, type test, initial factory audit, regular / annual
factory audit (i.e. the “supervision after certification” in this Rules).
- Manage, plan, guide and site-visit the global factories / suppliers’ global
factories (i.e. the “manufacturing enterprises” in this Rules) in North
America, Europe and China for CQC initial factory audit and regular
annual factory audit (supervision after certification).
- ISO Process Auditor, certified by Motorola USA & Motorola Singapore
- PMP, certified by Project Management Institute USA.
to deliver. < 2 hours in office time; < 10 hours in off-office time.
Table of Contents
0 Introduction ... 4
1 Application scope ... 4
2 Standards for certification ... 4
3 Certification modes ... 4
4 Classification of certification units ... 5
5 Certification entrusting ... 5
6 Certification implementation ... 6
7 Supervision after certification ... 9
8 Certificate ... 11
9 Certification marks ... 12
10 Charges ... 13
11 Certification responsibility ... 13
12 Certification implementation details ... 14
Attachment 1. Product description of car seat belts ... 15
Attachment 2. Production consistency requirements ... 17
Appendix 1. Factory quality assurance capability requirements ... 19
Attachment 3. Certification implementation of service parts for the after-sales
maintenance for vehicles out of production ... 25
0 Introduction
This Rules is established based on the security risk and certification risk of car
seat belts. It stipulates the basic principles and requirements for the
implementation of compulsory product certification for car seat belts.
This Rules can be used with other general rules issued by Certification and
Accreditation Administration (CNCA), such as “Compulsory Product Certification
Implementation Rules - Manufacturing Enterprise Classification Management,
Certification Mode Selection and Determination”, “Compulsory Product
Certification Implementation Rules – Manufacturing Enterprise Testing Resource
and Utilization of Other Certification Results”, “Compulsory Product Certification
Implementation Rules - Factory Inspection General Requirements”.
The certification body shall make principles for certification according to the
general implementation rules and this Rules and implement them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of
sustaining the compliance with the certification and are compatible with the
requirements of the standards.
1 Application scope
This Rules applies to the seat belt products that are installed on car seats of. M-
type and N-type motor vehicles, and that are acted as independent devices and
used independently by adult passengers.
Due to the changes in the laws, regulations or related product standards,
technology, industry policies and other causes which may change the applicable
scope, the announcement released by CNCA shall be final and conclusive.
2 Standards for certification
GB 14166 Safety-belts, restraint systems, child restraint systems and ISOFIX
child restraint systems for occupants of power-driven vehicles
GB 8410 Flammability of automotive interior materials
In principle, the latest versions of above standards that are issued by the
National Standardization Administration shall be executed. When other versions
are required to use, then it shall be executed according to the applicable
relevant standards issued by the State Certification and Accreditation
Administration (CNCA).
3 Certification modes
The basic certification mode of implementing the compulsory product
certification for car seat belts is.
Type test + initial factory inspection + supervision after certification;
“Supervision after certification” in above basic certification mode refers to 1 of
the 3 modes – after certification, follow-up inspection and factory on-site
sampling testing OR inspection and sampling testing in the market OR
inspection.
The certification body shall follow the requirements of “Compulsory Product
Certification Implementation Rules - Manufacturing Enterprise Classification
Management, Certification Mode Selection and Determination” to carry out the
classification management to manufacturing enterprise; consider the results of
classification management; on the basis of basic certification mode,
appropriately increase the combination of supervision mode after certification, so
as to determine the certification mode that is applicable to certification client
[TRNASLATOR NOTE is not part of this Rules. Translator note. “certification
client”, the counterpart of certification body, refers to the Applicant /
Manufacturer or its proxy (Power of Attorney). For ease of reading, hereinafter
abbreviated as “CLIENT”].
4 Classification of certification units
In principle, “the car seat belts” products of the same function, produced by the
same producer (manufacturer) and same manufacturing enterprise (location),
and having no significant difference in the following aspects could be classified
as one certification unit.
(1) rigid parts (retractor, buckle, connectors, etc.);
(2) webbing material, weaving method, size and color etc.;
(3) the geometry of the seat-belt assembly.
In principle, CLIENT shall put forward the certification entrusting based on the
principle of unit classification. It may include multiple “models (or specifications)”
products in a same-unit. Same-model refers to those products of which the
design has no impact to standard compliance.
For the same product that is of same manufacturer but of different
manufacturing enterprises, or for the same-model product that is of different
manufacturers and of same manufacturing enterprise, it may consider to only
conduct the type test on the samples of 1 unit. The products of other
manufacturing enterprises / manufacturers shall provide documents for
consistency inspection.
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in
an appropriate way. Certification body shall process the certification entrusting;
and feedback the acceptance or rejection according to the time limit in the
certification implementation rules.
b. Designated test in factory on-site (selected from production consistency
control plan).
If no un-conformance product is found, the inspection result is qualified;
If un-conformance products are found, factory is allowed to make rectifications.
Certification body adopts appropriate way to confirm the rectification results. The
rectification time must not be more than 3 months. If the rectification cannot be
finished on time, or the rectification results are not conformant, the inspection
result is unqualified.
If there is significant deviation between production consistency control plan and
its implementation situation, or the structure and parameters of the actual
products are significantly different from the type test samples, the inspection
result is disqualified, and this certification is terminated.
6.3 Certification evaluation and approval
Certification body shall make a comprehensive evaluation to the type test,
factory inspection r...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|