|
Std ID |
Description (Standard Title) |
Detail |
|
SH/T 0692-2000
|
Rust preventive oils
|
SH/T 0692-2000
|
|
SH/T 0693-2000
|
Standard test method for determination of benzene, boluene, ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total aromatics in finished gasoline by gas chromatography
|
SH/T 0693-2000
|
|
SH/T 0694-2000
|
Calculation of cetane index of middle-distillate fuels by the four-variable equation
|
SH/T 0694-2000
|
|
SH/T 0695-2000
|
Standard test method for engine oil volatility by gas chromatography
|
SH/T 0695-2000
|
|
SH/T 0696-2000
|
Standard test method for nickel and vanadium in FCC equilibrium catalysts by hydrofluoric/sulfuric acid decomposition and atomic spectroscopic analysis
|
SH/T 0696-2000
|
|
SH/T 0697-2000
|
Compatibility test of water-cooling two-stroke-cycle gasoline engine oil
|
SH/T 0697-2000
|
|
SH/T 0698-2000
|
Sealed glass tube method to test chemical stability of refrigerator oils for use within refrigerant systems
|
SH/T 0698-2000
|
|
SH/T 0699-2000
|
Test method for miscibility of refrigerator oils with refrigerants
|
SH/T 0699-2000
|
|
SH/T 0700-2000
|
Determination of rust-prevention characteristics of lubricating greases
|
SH/T 0700-2000
|
|
SH/T 0701-2001
|
Determination of total sediment in residual fuel oils by hot filtration
|
SH/T 0701-2001
|
|
SH/T 0702-2001
|
Determination of total sediment in residual fuel oils (standard procedures for ageing)
|
SH/T 0702-2001
|
|
SH/T 0703-2001
|
Standard test method for measuring apparent viscosity at high-temperature and high-shear rate by multicell capillary viscometer
|
SH/T 0703-2001
|
|
SH/T 0704-2001
|
Standard test method for nitrogen in petroleum and petroleum products by boat-inlet chemiluminescence
|
SH/T 0704-2001
|
|
SH/T 0705-2001
|
Standard test method for determination of vanadium in heavy oils by spectrophotometry
|
SH/T 0705-2001
|
|
SH/T 0706-2001
|
Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods
|
SH/T 0706-2001
|
|
SH/T 0707-2001
|
Determination of benzene and toluene in petroleum waxes using headspace gas chromatography with flame ionization detection
|
SH/T 0707-2001
|
|
SH/T 0708-2001
|
Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (OMC 70HP)
|
SH/T 0708-2001
|
|
SH/T 0709-2001
|
Standard test method for evaluating detergency and general performance of water-cooled two-stroke gasoline engine oil (Mercury 15HP)
|
SH/T 0709-2001
|
|
SH/T 0710-2001
|
Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oil (EGD)
|
SH/T 0710-2001
|
|
SH/T 0711-2002
|
Standard test method for manganese in gasoline by atomic absorption spectroscopy
|
SH/T 0711-2002
|
|
SH/T 0712-2002
|
Standard test method for iron in gasoline by atomic absorption spectroscopy
|
SH/T 0712-2002
|
|
SH/T 0713-2002
|
Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography
|
SH/T 0713-2002
|
|
SH/T 0714-2002
|
Standard test method for detailed analysis of petroleum naphthas through n-nonane by capillary gas chromatography
|
SH/T 0714-2002
|
|
SH/T 0715-2002
|
Standard test methods for determination of nickel, vanadium, and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry
|
SH/T 0715-2002
|
|
SH/T 0716-2002
|
Test method for fretting wear protection by lubricating greases
|
SH/T 0716-2002
|
|
SH/T 0719-2002
|
Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC)
|
SH/T 0719-2002
|
|
SH/T 0720-2002
|
Standard test method for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection
|
SH/T 0720-2002
|
|
SH/T 0721-2002
|
Standard test method for measuring friction and wear properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
|
SH/T 0721-2002
|
|
SH/T 0722-2002
|
Standard test method for high temperature foaming characteristics of lubricating oils
|
SH/T 0722-2002
|
|
SH/T 0723-2002
|
Standard test method for evaluation of corrosiveness of diesel engine oil
|
SH/T 0723-2002
|
|
SH/T 0724-2002
|
Test method for refractive index and refractive dispersion of hydrocarbon liquids
|
SH/T 0724-2002
|
|
SH/T 0725-2002
|
Standard test method for carbon-type composition of insulating oils of petroleum origin
|
SH/T 0725-2002
|
|
SH/T 0728-2004
|
Test method for odor stability of paraffin wax
|
SH/T 0728-2004
|
|
SH/T 0729-2004
|
Test method for calculation of carbon distribution and structural group analysis of petroleum oils by the n-d-M method
|
SH/T 0729-2004
|
|
SH/T 0730-2004
|
Estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
|
SH/T 0730-2004
|
|
SH/T 0731-2004
|
Standard test method for evaporation loss of lubricating oils by thermogravimetric analyzer (TGA) Noack method
|
SH/T 0731-2004
|
|
SH/T 0732-2004
|
Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature-scanning technique
|
SH/T 0732-2004
|
|
SH/T 0733-2004
|
Test method for flash point by tag closed cup tester
|
SH/T 0733-2004
|
|
SH/T 0734-2003
|
Polymer modified asphalt cement for use in pavement construction
|
SH/T 0734-2003
|
|
SH/T 0735-2003
|
Standard test method for toughness and tenacity of bitumen
|
SH/T 0735-2003
|
|
SH/T 0736-2003
|
Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)
|
SH/T 0736-2003
|
|
SH/T 0737-2003
|
Standard test method for elastic recovery of bituminous materials by ductilometer
|
SH/T 0737-2003
|
|
SH/T 0738-2003
|
Standard test method for solubility of polymer-modified asphalt materials in 1, 1, 1-trichloroethane
|
SH/T 0738-2003
|
|
SH/T 0739-2003
|
Standard test method for viscosity determination of unfilled asphalt using the Brookfield thermosel apparatus
|
SH/T 0739-2003
|
|
SH/T 0740-2003
|
Standard test method for separation of polymer modified asphalt
|
SH/T 0740-2003
|
|
SH/T 0741-2004
|
Standard test method for determination of hydrocarbon types composition in gasoline by multidimensional gas chromatography
|
SH/T 0741-2004
|
|
SH/T 0742-2004
|
Standard test method for sulfur in gasoline by energy-dispersive X-ray fluorescence spectrometry
|
SH/T 0742-2004
|
|
SH/T 0749-2004
|
Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry
|
SH/T 0749-2004
|
|
SH/T 0750-2005
|
Standard test method for determination of high temperature deposits by thermo-oxidation engine oil simulation test
|
SH/T 0750-2005
|
|
SH/T 0751-2005
|
Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer
|
SH/T 0751-2005
|
|
SH/T 0752-2005
|
Determination of the corrosion resistance of water-containing fire-resistant hydraulic fluids
|
SH/T 0752-2005
|
|
SH/T 0753-2005
|
Standard test method for determination of chemical group composition in lube base oil by thin-layer chromatography
|
SH/T 0753-2005
|
|
SH/T 0754-2005
|
Standard test method for evaluation of corrosiveness of diesel engine oil at 135 Celsius
|
SH/T 0754-2005
|
|
SH/T 0755-2005
|
Standard test method for evaluation of the thermal and oxidative stability of lubricating oil used for manual transmissions and final drive axles
|
SH/T 0755-2005
|
|
SH/T 0756-2005
|
Standard test method for evaluating the thermal stability of manual transmission lubricants in a cyclic durability test
|
SH/T 0756-2005
|
|
SH/T 0757-2005
|
Standard dynamometer test method for measuring the energy conserving quality of engine oils
|
SH/T 0757-2005
|
|
SH/T 0758-2005
|
Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (Sequence-ⅢE method)
|
SH/T 0758-2005
|
|
SH/T 0759-2005
|
Test method for evaluation of automotive engine oils for inhibition of deposit formation and wear (Sequence-ⅤE method)
|
SH/T 0759-2005
|
|
SH/T 0760-2005
|
Standard test method for evaluation of diesel engine oils in T-8 diesel engine
|
SH/T 0760-2005
|
|
SH/T 0761-2005
|
Standard test method for evaluation of diesel engine oils in T-9 diesel engine
|
SH/T 0761-2005
|
|
SH/T 0762-2005
|
The test method for determination of the coefficient of friction of lubricants using the four-ball wear test machine
|
SH/T 0762-2005
|
|
SH/T 0763-2005
|
Standard test method for evaluation of rust preventive characteristics of automotive engine oils (Ball rust test method)
|
SH/T 0763-2005
|
|
SH/T 0764-2005
|
Test method for diesel engine injector nozzle coking test (XUD-9)
|
SH/T 0764-2005
|
|
SH/T 0765-2005
|
Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR)
|
SH/T 0765-2005
|
|
SH/T 0766-2005
|
Antiwear additive for jet fuels T1602
|
SH/T 0766-2005
|
|
SH/T 0767-2005
|
Food grade Vaseline
|
SH/T 0767-2005
|
|
SH/T 0768-2005
|
Test method of flash point by continuously closed cup tester
|
SH/T 0768-2005
|
|
SH/T 0769-2005
|
Standard test method for determination of vapor pressure of petroleum products, hydrocarbon, and hydrocarbon-oxygenate mixtures (Triple expansion method)
|
SH/T 0769-2005
|
|
SH 0009-1990
|
(Cosmetic paraffin)
|
SH 0009-1990
|
|
SH/T 0771-2005
|
Test method for pour point of petroleum products (Automatic pressure pulsing method)
|
SH/T 0771-2005
|
|
SH/T 0772-2005
|
Standard test method for measuring the effect on filterability of engine oils after treatment with water and dry ice and a short heating time
|
SH/T 0772-2005
|
|
SH/T 0773-2005
|
Standard test method for life performance of automotive wheel bearing grease
|
SH/T 0773-2005
|
|
SH/T 0774-2005
|
Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV)
|
SH/T 0774-2005
|
|
SH/T 0775-2005
|
Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR)
|
SH/T 0775-2005
|
|
SH/T 0776-2005
|
Standard test method for determining the fracture properties of asphalt binder in direct tension (DT)
|
SH/T 0776-2005
|
|
SH/T 0777-2005
|
Determining the rheological properties of asphalt bindder using a dynamic shear rheometer (DSR)
|
SH/T 0777-2005
|
|
SH/T 0778-2005
|
Determination of paraffin wax content of asphalts by cracking and deoiling method
|
SH/T 0778-2005
|
|
SH/T 0779-2005
|
Determination of Saybolt viscosity of emulsified asphalt
|
SH/T 0779-2005
|
|
SH/T 0780-2005
|
Determination of demulsibility of emulsified asphalt
|
SH/T 0780-2005
|
|
SH/T 0781-2005
|
Test method for miscibility with water of emulsified asphalt
|
SH/T 0781-2005
|
|
SH/T 0782-2005
|
Test procedure for evaluating the performance of internal combustion engine oils (Caterpillar 1K/1N procedure)
|
SH/T 0782-2005
|
|
SH/T 0783-2005
|
Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (CEPT-Ⅲ method)
|
SH/T 0783-2005
|
|
SH/T 0784-2006
|
Standard test method for determining extreme pressure properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
|
SH/T 0784-2006
|
|
SH/T 0785-2006
|
Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
|
SH/T 0785-2006
|
|
SH/T 0786-2006
|
Standard test method for evaluation of engine oils in diesel four-stroke cycle supercharged 1M-PC single cylinder oil test engine
|
SH/T 0786-2006
|
|
SH/T 0787-2006
|
Standard test method for indicating wear characteristics of petroleum hydraulic fluids in a high pressure constant volume vane pump
|
SH/T 0787-2006
|
|
SH/T 0788-2006
|
Standard test method for evaluation of automotive engine oils in the sequence Ⅷ spark-ignition engine (CLR oil test engine)
|
SH/T 0788-2006
|
|
SH/T 0789-2007
|
Extreme pressure polyurea lubricating grease
|
SH/T 0789-2007
|
|
SH/T 0790-2007
|
Standard test method for oxidation induction time of lubricating greases by pressure differential scanning calorimetry
|
SH/T 0790-2007
|
|
SH/T 0791-2007
|
Standard test method for measuring the effect on filterability of engine oils after treatment with various amounts of water and a long(6-h) heating time
|
SH/T 0791-2007
|
|
SH/T 0792-2007
|
Standard test method for 2, 6-di-tert-butyl-p-cresol and 2, 6-di-tert-butyl phenol in electrical insulating oil by infrared absorption
|
SH/T 0792-2007
|
|
SH/T 0793-2007
|
Standard test method for aromatic carbon contents of hydrocarbon oils by high resolution nuclear magnetic resonance spectroscopy
|
SH/T 0793-2007
|
|
SH/T 0794-2007
|
Standard test method for vapor pressure of petroleum products (mini method)
|
SH/T 0794-2007
|
|
SH/T 0795-2007
|
Determination of emulsion stability of fire-resistant fluids in category HFAE
|
SH/T 0795-2007
|
|
SH/T 0796-2007
|
Test method for determination of free and total glycerine in B-100 biodiesel methyl esters by gas chromatography
|
SH/T 0796-2007
|
|
SH/T 0797-2007
|
Standard test method for determination of benzene in spark-ignition engine fuels using mid infrared spectroscopy
|
SH/T 0797-2007
|
|
SH/T 0798-2007
|
Standard specification for anionic emulsified asphalt
|
SH/T 0798-2007
|
|
SH/T 0799-2007
|
Hydraulic asphalt
|
SH/T 0799-2007
|
|
SH/T 0800-2007
|
Standard test method for dropping point of waxes
|
SH/T 0800-2007
|
|
SH/T 0801-2007
|
Standard test method for determination of homogeneity and miscibility in automotive engine oils
|
SH/T 0801-2007
|