|
Std ID |
Description (Standard Title) |
|
JB/T 6237.10-1992
|
(Electrical contacts chemically analyzed by silver. Silver solution PH value measurement)
|
|
JB/T 6237.11-1992
|
(Electrical contact with the chemical analysis of silver. Benzidine visual colorimetric determination of nitrate content)
|
|
JB/T 6237.1-1992
|
(The electrical contact with the chemical analysis of silver chloride, silver precipitation - photometric measurements for silver content of dimethyl benzyl Kiro aminoalkylene tannins spectroscopic)
|
|
JB/T 6237.12-1992
|
(Silver electrical contacts chemical analysis methods - Determination of silver chloride content - Gravimetric method)
|
|
JB/T 6237.2-1992
|
(Electrical contact with the chemical analysis of silver. Bicyclic ketone has oxalyl dihydrazone spectrophotometric determination of copper content)
|
|
JB/T 6237.3-1992
|
(Electrical contact with the chemical analysis of silver. Phenanthroline spectrophotometric determination of iron content)
|
|
JB/T 6237.4-1992
|
(Electrical contact with the chemical analysis of silver spectrophotometric determination of nickel content Methyl 2- (5-bromo-2-pyridyl azo) -5 diethylaminophenol spectrophotometric)
|
|
JB/T 6237.5-1992
|
(Silver electrical contacts chemical analysis methods - Determination of nickel content by flame atomic absorption spectrometry)
|
|
JB/T 6237.6-1992
|
(Silver electrical contacts chemical analysis methods - Determination of sodium content by flame atomic absorption spectrometry)
|
|
JB/T 6237.7-1992
|
(Electrical contact with the chemical analysis of silver. Dimethylanilide Blue II Determination of magnesium content)
|
|
JB/T 6237.8-1992
|
(Silver electrical contacts chemical analysis methods - Determination of magnesium content by flame atomic absorption spectrometry)
|
|
JB/T 6237.9-1992
|
(Silver electrical contacts chemical analysis methods - Determination of moisture content - Gravimetric method)
|
|
JB/T 5336-1991
|
(Copper tungsten electrical contact with tungsten powder technical conditions)
|
|
JB/T 5351-1991
|
Test method for basic properties of contact materials of vacuum switches
|
|
JB/T 5802-1991
|
Thermal bimetal strip-shaped component. Technical specification
|
|
JB 4281-1986
|
(Chinese Industry Standard)
|
|
JB 4310-1986
|
(Riveted silver-copper composite contact structure type and size series)
|
|
JB 4107.1-1985
|
(Chinese Industry Standard)
|
|
JB 4107.2-1985
|
(Chinese Industry Standard)
|
|
JB 4107.3-1985
|
(Determination of silver cadmium oxide cadmium)
|
|
JB 4107.4-1985
|
(Chinese Industry Standard)
|
|
JB 4107.5-1985
|
(Chinese Industry Standard)
|
|
JB 4107.6-1985
|
(Chinese Industry Standard)
|
|
JB 4107.7-1985
|
(Chinese Industry Standard)
|
|
JB 3571-1984
|
(Spot welding electrode with copper-chromium alloy rods)
|
|
JB 1373-1974
|
(Electrical contacts)
|
|
JB/T 3302-2025
|
(Load detection electrical/optical cable)
|
|
JB/T 14660-2024
|
(Rubber insulated flexible cable for underground tunneling equipment with rated voltage of 6kV to 30kV)
|
|
JB/T 14389-2023
|
(High temperature superconducting cable technical requirements)
|
|
JB/T 10438-2022
|
(Rated voltage 300/500V XLPE insulated flexible wire)
|
|
JB/T 10491-2022
|
(Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V)
|
|
JB/T 13795-2020
|
(Medium-strength aluminum alloy conductor overhead insulated cable with rated voltage of 20 kV and below)
|
|
JB/T 13484-2018
|
Power cable with fluoroplastic insulation for rated voltages of 0.6/1kV
|
|
JB/T 13485-2018
|
Control cable with fluoroplastic insulation for rated voltages up to and including 450/750V
|
|
JB/T 13486-2018
|
Shielded cables for computer and instrumentation
|
|
JB/T 13106-2017
|
Power cable with silicone rubber insulation for rated voltages of 0.6/1 kV
|
|
JB/T 13107-2017
|
Silicone rubber insulated and sheathed flat cable of rated voltage up to and including 0.6/1 kV
|
|
JB/T 13108-2017
|
Control cable with silicone rubber insulation of rated voltages up to and including 450/750 V
|
|
JB/T 2171-2016
|
Field(agricultural) buried cables of rated voltages 0.6/1 kV
|
|
JB/T 3302-2016
|
Load bearable detective cable
|
|
JB/T 8734.1-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 1: General requirements
|
|
JB/T 8734.2-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 2: Insulated cables and wires for fixed wiring
|
|
JB/T 8734.3-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 3: Cords and cables for connecting
|
|
JB/T 8734.4-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 4: Insulated wires for internal wiring of equipment
|
|
JB/T 8734.5-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 5: Screened wires
|
|
JB/T 8734.6-2016
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V - Part 6: Lift cables
|
|
JB/T 8735.1-2016
|
Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V - Part 1: General requirements
|
|
JB/T 8735.2-2016
|
Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V - Part 2: Tough rubber sheathed flexible cables for general purposes
|
|
JB/T 8735.3-2016
|
Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V - Part 3: Rubber insulated braided cords
|
|
JB/T 8310.1-2015
|
Splice closure for optical cable. Part 1: General and guidance
|
|
JB/T 8310.2-2015
|
Splice closure for optical cable. Part 2: Splice closure for outdoor optical cable
|
|
JB/T 8310.3-2015
|
Splice closure for optical cable. Part 3: Terminal box for optical cable
|
|
JB/T 8502-2015
|
Jelly for telecommunication cable
|
|
JB/T 10181.11-2014
|
Electric cables. Calculation of the current rating. Part 11: Current rating equations (100% load factor) and calculation of losses. General
|
|
JB/T 10181.12-2014
|
Electric cables. Calculation of the current rating. Part 12: Current ratingequations (100% load factor) and calculation of losses. Sheath eddycurrent loss factors for two circuits in flat formation
|
|
JB/T 10181.21-2014
|
Electric cables. Calculation of the current rating. Part 21: Thermal resistance. Calculation of thermal resistance
|
|
JB/T 10181.22-2014
|
Electric cables. Calculation of the current rating. Part 22: Thermal resistance. A method for calculating reductionfactors for groups of cables in free air, protected from solar radiation
|
|
JB/T 10181.31-2014
|
Electric cables. Calculation of the current rating. Part 31: Sections on operating conditions. Referenceoperating conditions and selection of cable type
|
|
JB/T 10181.32-2014
|
Electric cables. Calculation of the current rating. Part 32: Sections onoperating conditions. Economic optimization of power cable size
|
|
JB/T 10260-2014
|
Insulating Compounds for Aerial Insulated Cables
|
|
JB/T 10261-2014
|
Polyvinyl Chloride Insulated and Nylon Sheathed Wires and Cables with Rated Voltages up to and Including 450/750 V
|
|
JB/T 8640-2014
|
Type designation for accessories of power cables with rated voltages up to and including 26/35 kV
|
|
JB/T 8996-2014
|
Guide to the selection of high-voltage cables
|
|
JB/T 4015.1-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 1: General requirements
|
|
JB/T 4015.2-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 2: Pillar type pay-off and take-up
|
|
JB/T 4015.3-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 3: Travelling crane type pay-off and take-up
|
|
JB/T 4015.4-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 4: Sliding guide track type pay-off and take-up
|
|
JB/T 4015.5-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 5: Cabinet type take-up
|
|
JB/T 4015.6-2013
|
Adaptable units for general use of wire and cable machinery. Pay-off and take-up. Part 6: Static type pay-off
|
|
JB/T 4032.1-2013
|
Adaptable units for general use of wire and cable machinery. Haul-off. Part 1: General requirements
|
|
JB/T 4032.2-2013
|
Adaptable units for general use of wire and cable machinery. Haul-off. Part 2: Wheel haul-off
|
|
JB/T 4032.3-2013
|
Adaptable units for general use of wire and cable machinery. Haul-off. Part 3: Caterpillar haul-off
|
|
JB/T 4032.4-2013
|
Adaptable units for general use of wire and cable machinery. Haul-off. Part 4: Wheel and belt haul-off
|
|
JB/T 4033.1-2013
|
Adaptable units for general use of wire and cable machinery. Lapper. Part 1: General requirements
|
|
JB/T 4033.2-2013
|
Adaptable units for general use of wire and cable machinery. Lapper. Part 2: Normal type taping head
|
|
JB/T 4033.3-2013
|
Adaptable units for general use of wire and cable machinery. Lapper. Part 3: Planar type taping head
|
|
JB/T 4033.4-2013
|
Adaptable units for general use of wire and cable machinery. Lapper. Part 4: Semi-tangent type taping head
|
|
JB/T 8137.1-2013
|
Delivery drums for wires and cables - Part 1: General specifies
|
|
JB/T 8137.2-2013
|
Delivery drums for wires and cables. Part 2: Wood delivery drums
|
|
JB/T 8137.3-2013
|
Delivery drums for wires and cables. Part 3: Steel delivery drums with corrugated plate
|
|
JB/T 8137.4-2013
|
Delivery drums for wires and cables. Part 4: Shaped steel composite delivery drums
|
|
JB/T 8997.1-2013
|
Machine spools with large bore for processing of wires and cables. Part 1: General specifies
|
|
JB/T 8997.2-2013
|
Machine spools with large bore for processing of wires and cables. Part 2: Machine spools with welded steel plate
|
|
JB/T 8997.3-2013
|
Machine spools with large bore for processing of wires and cables. Part 3: Common machine spools with stamped steel plate
|
|
JB/T 8997.4-2013
|
Machine spools with large bore for processing of wires and cables. Part 4: Reinforced machine spools with stamped steel plate
|
|
JB/T 8734.2-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 2: Insulated cables and wires for fixed wiring
|
|
JB/T 8734.3-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V. Part 3: Cords and cables for connecting
|
|
JB/T 8734.4-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 4: Insulated wires for internal wiring of equipment
|
|
JB/T 8734.5-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V - Part 5: Screened wires
|
|
JB/T 8734.1-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V. Part 1: General requirements
|
|
JB/T 8734.6-2012
|
Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750 V. Part 6: Life cables
|
|
JB/T 10696.10-2011
|
Test methods for determing mechanical, physical and chemical properties of electric cables and wires. Part 10: Rat gnawing test
|
|
JB/T 10696.9-2011
|
Test methods for determining mechanical, physical and chemical properties of electric cables and wires - Part 9: Termite test
|
|
JB/T 11167.1-2011
|
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV (Um=126kV). Part 1: Test methods and requirements
|
|
JB/T 11167.2-2011
|
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV (Um=126kV).
|
|
JB/T 11167.3-2011
|
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV (Um=126kV).
|
|
JB/T 4278.10-2011
|
Verification procedure for test equipment of rubber plastic wire and cable. Part 1O: Spark tester
|
|
JB/T 4278.11-2011
|
Verification procedure for test equipment of rubber plastic wire and cable. Part 11: Low temperature bending test device
|
|
JB/T 4278.1-2011
|
Verification procedure for test equipment of rubber plastic wire and cable. Part 1: General
|
|
JB/T 4278.12-2011
|
Verification procedure for test equipment of rubber plastic wire and cable. Part 12: High temperature pressure test device
|