|
Std ID |
Description (Standard Title) |
|
YD/T 794-1996
|
Technical requirement and test method for digital multiplex equipment at 704/2048kbit/s
|
|
YD/T 795-1996
|
Technical requirement and test method for basic group multiplexing equipment (provides 384kbit/s digital port)
|
|
YD/T 821-1996
|
Numerical graphics of measured digital transmission performances
|
|
YD/T 822-1996
|
p×64kbit/s conference TV encoded mode
|
|
YD/T 742-1995
|
Technical requirement and test method for digital signaling conversion equipment at 2048kbit/s
|
|
YD/T 743-1995
|
Technical conditions of symmetrical cable regenerative trunk equipment operating at 2048kbit/s
|
|
YD/T 748-1995
|
Limit value for maintenance of PDH digital channel error performances
|
|
YD/T 786-1995
|
Technical requirement for time-division multiplexer at 64kbit/s access to digital network
|
|
YD/T 787-1995
|
Test method of time-division multiplexer at 64kbit/s
|
|
YD/T 724-1994
|
Frame structure and multiplexing method for synchronous transport module STM-1, STM-4
|
|
YD 610-1993
|
Technical requirement and test method for interface equipments for PCM group signaling
|
|
YD/T 631-1993
|
Technical requirement and test method of 2/34Mbit/s aggregate number-jump digital multiplex equipment
|
|
YD/T 697-1993
|
Adaptive differential pulse code modulation at 32kbit/s
|
|
YD/T 698-1993
|
Test method for 60-channel PCM/ADPCM transcoder equipment
|
|
YD 335-1988
|
Digital Line Signalling for Intertoll Exchange
|
|
YD 336-1988
|
Digital Line Signalling for Manual Toll Exchange to Local Exchange
|
|
YD 284-1982
|
(2048 kbit/s regenerative relay Technical conditions)
|
|
YD 285-1982
|
(2048 kbit/s Line Terminal Equipment Technical conditions)
|
|
YD/T 1367-2008
|
Technical Requirements for User Equipment of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network
|
|
YD/T 1368.1-2008
|
Test Method for User Equipment of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network. Part 1: Basic Operation, Services and Performance Test
|
|
YD/T 1031-1999
|
Technical Specification of 800MHz CDMA Digital Cellular Mobile Telecommunication Network Mobile Application Part
|
|
YD/T 1268-2022
|
(Safety requirements and test methods for lithium-ion battery packs and chargers for mobile communication handsets)
|
|
YD 1268-2003
|
[Split to YD/T 1268.1-2003, YD/T 1268.2-2003] The safety specification and test method for lithium batteries and charger
|
|
YD/T 3627-2024
|
(Technical requirements for 5G digital cellular mobile communication network enhanced mobile broadband terminal equipment (Phase I))
|
|
YD/T 4664-2024
|
(5G general module technical requirements (Phase II))
|
|
YD/T 2869.2-2024
|
(Terminal MIMO antenna performance requirements and measurement methods - Part 2: 5G terminals (frequency bands below 6 GHz))
|
|
YD/T 4721-2024
|
(Technical requirements for 5G digital cellular mobile communication network enhanced mobile broadband terminal equipment (Phase II))
|
|
YD/T 4730-2024
|
(Measurement method of air interface electromagnetic characteristics of 5G active integrated system)
|
|
YD/T 4756-2024
|
(Antenna equipment model naming method)
|
|
YD/T 4876-2024
|
(Wearable device safety and reliability technical specifications Head-mounted devices)
|
|
YD/T 4954-2024
|
(5G edge computing security technical requirements)
|
|
YD/T 6019-2024
|
(Security technical requirements for the functional architecture of the 5G mobile communication network capability exposure common application programming interface (API))
|
|
YD/T 6151.1-2024
|
(Technical requirements and test methods for information perception components in mobile smart terminals - Part 1: General requirements)
|
|
YD/T 6151.2-2024
|
(Technical requirements and test methods for information perception components in mobile smart terminals - Part 2: Barometer)
|
|
YD/T 6157-2024
|
(Technical requirements and test methods for mobile intelligent shooting remote control equipment based on 5G network)
|
|
YD/T 6288-2024
|
(Transmission performance requirements and test methods for vehicle-mounted ultra-wideband and full-band voice communication equipment)
|
|
YD/T 4193-2023
|
(Technical requirements for 5G multi-mode dual-card dual-standby terminal equipment)
|
|
YD/T 4281-2023
|
(5G Mobile Communication Network Service Interface Technical Requirements and Test Methods (Phase 1))
|
|
YD/T 4286-2023
|
(Overall Technical Requirements for 5G Voice Services)
|
|
YD/T 1484.1-2023
|
(Wireless terminal space radio frequency radiated power and receiver performance measurement methods - Part 1: General requirements)
|
|
YD/T 1484.9-2023
|
(Wireless terminal space radio frequency radiation power and receiver performance measurement method - Part 9: 5G NR wireless terminal (Sub-6GHz))
|
|
YD/T 4486-2023
|
(5G voice service core network equipment technical requirements and testing methods)
|
|
YD/T 4490-2023
|
(LTE digital cellular mobile communication network enhanced machine type communications (eMTC) terminal equipment test method (Phase 2))
|
|
YD/T 4491-2023
|
(Technical requirements for emergency communication aerial base stations based on tethered UAVs)
|
|
YD/T 4515-2023
|
(Mobile intelligent terminal intelligent performance benchmark evaluation method)
|
|
YD/T 4519-2023
|
(Technical requirements for protection of communication facility operation and maintenance personnel exposed to DC and power frequency electromagnetic fields)
|
|
YD/T 4550-2023
|
(5G multi-mode single card terminal equipment technical requirements)
|
|
YD/T 4556-2023
|
(LTE digital cellular mobile communication network terminal equipment test method (Phase 4))
|
|
YD/T 4602-2023
|
(5G core network edge computing platform testing method)
|
|
YD/T 1606-2022
|
(900/1800MHz TDMA digital cellular mobile communication network general packet radio service (GPRS) network compatibility test method mobile station)
|
|
YD/T 2308-2022
|
(Transmission performance requirements and test methods for vehicle-mounted narrowband voice communication equipment)
|
|
YD/T 4157-2022
|
(Technical requirements and test methods for voice recognition function of vehicle communication terminal)
|
|
YD/T 3847-2021
|
(Roadside equipment test method based on LTE-based car networking wireless communication technology supporting direct communication)
|
|
YD/T 3848-2021
|
(LTE-based vehicle access wireless communication technology direct connection communication terminal equipment test support)
|
|
YD/T 1591-2021
|
Technical Requirements and Test Method for Power Adapter and Charging/Data Port of Mobile Telecommunication Terminal Equipment
|
|
YD/T 2869.1-2021
|
(Terminal MIMO antenna performance requirements and measurement methods - Part 1: LTE wireless terminal)
|
|
YD/T 3932-2021
|
(LTE/CDMA/TD-SCDMA/WCDMA/GSM (GPRS) multi-dual card multi-standby terminal protocol module test method)
|
|
YD/T 3988-2021
|
(5G General Module Technical Requirements (Phase 1))
|
|
YD/T 4002-2021
|
(5G Digital Cellular Mobile Communication Network Enhanced Mobile Broadband Terminal Equipment Test Method (Phase 1))
|
|
YD/T 2862-2020
|
(Technical requirements for LTE / WCDMA / GSM (GPRS) multimode dual card dual standby terminal equipment)
|
|
YD/T 2863-2020
|
(LTE / WCDMA / GSM (GPRS) multi-mode dual-card dual-standby terminal equipment test method)
|
|
YD/T 3633-2020
|
(TD-LTE digital cellular mobile communication network repeater technical requirements and test methods)
|
|
YD/T 3634-2020
|
LTE FDD digital cellular mobile telecommunication network technical requirements and test method of repeater
|
|
YD/T 3677-2020
|
(LTE digital cellular mobile communication network terminal equipment test method (second stage))
|
|
YD/T 3694-2020
|
(Mobile communication terminal barrier-free testing method)
|
|
YD/T 3702-2020
|
(Technical requirements and test methods of radio frequency indicators of base station equipment for railway dedicated GSM-R system)
|
|
YD/T 3706-2020
|
(Technical requirements and test methods for multiple-input multiple-output (MIMO) single cable coverage system of digital cellular mobile communication network)
|
|
YD/T 3721-2020
|
(Method for testing network management interface of multi-input multi-output (MIMO) single cable coverage system of digital cellular mobile communication network)
|
|
YD/T 3729-2020
|
(Technical requirements and test methods for primary battery of Internet of Things terminal)
|
|
YD/T 3808-2020
|
(Technical requirements for multi-channel networked secure payment of mobile smart terminals)
|
|
YD/T 1539-2019
|
Technical Requirements And Test Method For Reliability of Mobile Telecommunication Handset
|
|
YD/T 5100.1-2019
|
(Specification for testing seismic resistance of mobile communication base station equipment-Part 1: Base station)
|
|
YD/T 2864-2019
|
(Technical requirements for LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual-card multi-standby terminal)
|
|
YD/T 2865-2019
|
(LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual-card multi-standby terminal equipment test method)
|
|
YDB 200-2018
|
Technical Requirements and Test methods for Wearable device Wrist-Worn Device
|
|
YD/T 3338-2018
|
Test method for user equipment of Cellular Narrow-Band Radio Access for Internet of Things
|
|
YD/T 3359-2018
|
2GHz WCDMA digital cellular mobile telecommunication network Technical requirements and test methods of radio digital signal repeater
|
|
YD/T 3376-2018
|
Equipment technical requirement of base station subsystem for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network(Phase 2)
|
|
YD/T 3387-2018
|
(Mobile terminal management service (second phase) test method)
|
|
YD/T 3389-2018
|
Technical requirements for connection handover using NFC between mobile smart devices
|
|
YD/T 3390-2018
|
(Mobile terminal location information transmission technical requirements in case of emergency)
|
|
YD/T 1484.4-2017
|
Measurement method for radiated RF power and receiver performance of wireless device Part 4: WCDMA wireless device
|
|
YD/T 3222-2017
|
Technical requirement of SCDMA/GSM dual mode dual duration digital user equipment
|
|
YD/T 3230-2017
|
Common technical requirements and test methods for digital mobile telecommunication terminal
|
|
YDB 189-2017
|
(Public wireless LAN network management - Part 4: Interface testing methods)
|
|
YD/T 3298-2017
|
Technical requirements for location service equipments and interfaces based on LTE control plane
|
|
YD/T 3303-2017
|
800MHz/2GHz CDMA digital cellular mobile telecommunication network - Technical requirements and test methods for radio digital signal repeater
|
|
YD/T 3283-2017
|
Technical requirements and test methods for user equipment of global system for mobile communications. Railways
|
|
YD/T 1484.1-2016
|
Measurement method for radiated RF power and receiver performance of wireless device - Part 1: General requirement
|
|
YD/T 1484.2-2016
|
Measurement method for radiated RF power and receiver performance of wireless device - Part 2: GSM wireless device
|
|
YD/T 1484.5-2016
|
Specification for cables on board rolling stock - Part 2: 30kVsingle phase power cables
|
|
YD/T 2575-2016
|
Technical requirements for user equipment of TD-LTE digital cellular mobile telecommunication network(Phase1)
|
|
YD/T 2593-2016
|
Technical requirements for multimode single standby user equipment of TD-LTE/TD-SCDMA/GSM (GPRS)
|
|
YD/T 2873.3-2016
|
(Based on the high-speed ultra-wideband wireless carrier communication technology - Part 3: MAC layer air interface)
|
|
YD/T 2981-2016
|
Technical requirement for evolved high rate packet data (eHRPD)core network equipments in 800MHz/2GHz cdma2000 digital cellular mobile communication network
|
|
YD/T 2982-2016
|
(High-speed packet data 800MHz / 2GHz cdma2000 digital cellular mobile telecommunication network evolution (eHRPD) core network equipment test methods)
|
|
YD/T 2983-2016
|
(High-speed packet data 800MHz / 2GHz cdma2000 digital cellular mobile telecommunication network evolution (eHRPD) air interface technology requirements)
|
|
YD/T 2984-2016
|
Testing methods for Evolved High Rate Packet Data (eHRPD) air interface signaling conformance in 800MHz/2GHz cdma2000 digital cellular mobile communication network
|
|
YD/T 2985-2016
|
Testing methods for Evolved High Rate Packet Data (eHRPD)air interface network compatibility in 800MHz/2GHz cdma2000 digital cellular mobile communication network
|
|
YD/T 2986-2016
|
Technical requirement for evolved high rate packet data (eHRPD) A interface in 800MHz/2GHz cdma2000 digital cellular mobile communication
|