|
Std ID |
Description (Standard Title) |
|
GB/T 5170.20-1990
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Water testing equipments
|
|
GB/T 11804-1989
|
Terms of environmental conditions for electric and electronic products
|
|
GB/T 2423.1-1989
|
Basic environmental testing procedures for electric and electronic products - Tests A: Cold
|
|
GB/T 2423.2-1989
|
Basic environmental testing procedures for electric and electronic products - Tests B: Dry heat
|
|
GB/T 2423.33-1989
|
Basic environmental testing procedures for electric and electronic products - Test Kca: High consistence sulphur dioxide test
|
|
GB/T 2423.37-1989
|
Basic environmental testing procedures for electric and electronic products - Test L: Dust and sand
|
|
GB/T 2423.9-1989
|
Basic environmental testing procedures for electric and electronic products - Test Cb: Damp heat, steady state, primarily for equipment
|
|
GB/T 2424.1-1989
|
Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
|
|
GB/T 2706-1989
|
The testing methods of peak withstand current and short-time withstand current for high-voltage apparatus
|
|
GB/T 10593.1-1989
|
Method of measuring of environmental parameters for electric and electronic products--Vibration
|
|
GB/T 4797.4-1989
|
Environmental conditions appearing in nature for electric and electronic products--Solar radiation and temperature
|
|
GB/T 5170.19-1989
|
Inspection methods for basic parameters of environmen-tal testing equipments for electric and electronic products--Combined temperature/vibration (sinusoidal)testing equipments
|
|
GB/T 9651-1988
|
Test procedure for single phase induction motor
|
|
GB/T 2423.22-1987
|
Basic environmental testing procedures for electric and electronic products - Test N: Change of temperature
|
|
GB/T 4798.5-1987
|
Environmental conditions existing in the application of electric and electronic products--Ground vehicle installations
|
|
GB/T 4798.7-1987
|
Environmental conditions existing in the application of electric and electronic products--Portable and non-stationary use
|
|
GB/T 5170.17-1987
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined sequential cold/low air pressure and damp heat testing equipments
|
|
GB/T 5170.18-1987
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
|
|
GB/T 7159-1987
|
General rules for the formulation of letter symbols in electrotechnology
|
|
GB/T 7328-1987
|
Determination of transformer and reactor sound levels
|
|
GB/T 7343-1987
|
Method of measurement of the suppression characteristics of passive radio interference filters and suppression components over the frequency range of 10kHz to 30MHz
|
|
GB/T 7354-1987
|
Partial discharge measurements
|
|
GB/T 7356-1987
|
Preparation of diagrams for electrical system manuals
|
|
GB/T 8445-1987
|
Conventions concerning electric and magnetic circuits
|
|
GB/T 2423.34-1986
|
Basic environmental testing procedures for electric and electronic products - Test Z/AD: Composite temperature / humidity cyclic test
|
|
GB/T 2423.35-1986
|
Basic environmental testing procedures for electric and electronic products - Test Z/AFc: Combined low temperature / vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
|
|
GB/T 2423.36-1986
|
Basic environmental testing procedures for electric and electronic products - Test Z/BFc: Combined high temperature / vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
|
|
GB/T 2424.22-1986
|
Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
|
|
GB/T 4797.2-1986
|
Environmental conditions for electric and electronic products appearing in nature--Altitude and air pressure, deepness and water pressure
|
|
GB/T 4797.3-1986
|
Environmental conditions for electric and electronic products appearing in nature--Living organisms
|
|
GB/T 4798.1-1986
|
Environmental conditions existing in the application of electric and electronic products--Storage
|
|
GB/T 6988.1-1986
|
Electrotechnical drawings--terms
|
|
GB/T 6988.2-1986
|
Electrotechnical drawings--General rules
|
|
GB/T 6988.3-1986
|
Electrotechnical drawings--System diagram and block diagram
|
|
GB/T 6988.4-1986
|
Electrotechnical drawings--Circuit diagram
|
|
GB/T 6988.5-1986
|
Electrotechnical drawings--Connection diagram and connection table
|
|
GB/T 6988.7-1986
|
Electrotechnical drawings--Logic diagrams
|
|
GB/T 6999-1986
|
Relative humidity tables for environmental test
|
|
GB/T 2423.18-1985
|
Basic environmental testing procedures for electric and electronic products - Test Kb: salt mist, cyclic (sodium chloride solution)
|
|
GB/T 2423.31-1985
|
Basic environmental testing procedures for electric and electronic products - Test: Inclinations and motions
|
|
GB/T 2423.32-1985
|
Basic environmental testing procedures for electric and electronic products - Solderability testing by the wetting balance method
|
|
GB/T 2424.20-1985
|
Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions
|
|
GB/T 2424.21-1985
|
Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method
|
|
GB/T 2900.22-1985
|
Electrotechnical terminology--Electric welding machine
|
|
GB/T 2900.40-1985
|
Electrotechnical terminology. Machineryand equipment for electric wires and cables
|
|
GB/T 4728.10-1985
|
Graphical symbols for electrical diagrams--Telecommunications: transmission
|
|
GB/T 4728.11-1985
|
Graphical symbols for electrical diagrams--Electric power, lighting and telecommunications layout
|
|
GB/T 4728.1-1985
|
Graphical symbols for electrical diagrams--General information
|
|
GB/T 4728.4-1985
|
Graphical symbols for electrical diagrams--Passive components
|
|
GB/T 4728.5-1985
|
Graphical symbols for electrical diagrams--Semiconductors and electron tubes
|
|
GB/T 4728.9-1985
|
Graphical symbols for electrical diagrams--Telecommunications: switching and peripheral equipment
|
|
GB/T 5094-1985
|
Item designation in electrotechnology
|
|
GB/T 5169.1-1985
|
Fire hazard testing for electric and electronic products--Terminology
|
|
GB/T 5169.4-1985
|
Fire hazard testing for electric and electronic products--Test method and guidance of glow-wire
|
|
GB/T 5169.5-1985
|
Fire hazard testing for electric and electronic products--Test method of needle-flame
|
|
GB/T 5169.7-1985
|
Fire hazard testing for electric and electronic products--Test method of bunsen type flame
|
|
GB/T 5170.13-1985
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Mechanical vibrating type machines for vibration (sinusoidal) test
|
|
GB/T 5170.14-1985
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Electrodynamic vibrating type machines for vibration (sinusoidal) test
|
|
GB/T 5170.15-1985
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Hydraulic vibrating type machines for vibration (sinusoidal) test
|
|
GB/T 5170.16-1985
|
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Centrifugal machines for constant acceleration test
|
|
GB/T 2424.19-1984
|
Basic environmental testing procedures for electric and electronic products--Guidance for the environmental tests simulating the effects of storage
|
|
GB/T 2900.29-1984
|
Electrotechnical terminology--Household and similar electrical appliance
|
|
GB/T 4728.2-1984
|
Graphical symbols for electrical diagrams--Symbols elements, qualifying symbols and other symbols having general application
|
|
GB/T 4728.3-1984
|
Graphical symbols for electrical diagrams--Conductors and connecting devices
|
|
GB/T 4728.6-1984
|
Graphical symbols for electrical diagrams--Production and conversion of electrical energy
|
|
GB/T 4728.7-1984
|
Graphical symbols for electrical diagrams--Switchgear, controlgear and protective devices
|
|
GB/T 4728.8-1984
|
Graphical symbols for electrical diagrams--Measuring instruments, lamps and signalling devices
|
|
GB/T 4797.1-1984
|
Environmental conditions appearing in nature of electric and electronic products--Temperature and humidity
|
|
GB/T 2900.34-1983
|
Electrotechnical terminology--Electric drive and its automatic control
|
|
GB/T 2900.37-1983
|
Electrotechnical terminology--Special equipment for electro-ceramics
|
|
GB/T 2900.46-1983
|
Electrotechnical terminolog. Steam turbine and auxiliary equipments
|
|
GB/T 2900.48-1983
|
Electrotechnical terminology--Stationary boilers
|
|
GB/T 2900.5-1983
|
Electrotechnical terminology--Electrical insulating material
|
|
GB/T 3907-1983
|
General methods of measurement for industrial radio interference
|
|
GB/T 3926-1983
|
Rated voltage for medium frequency equipment
|
|
GB/T 2423.12-1982
|
Basic environmental testing procedures for electric and electronic products - Test Fda: Random vibration wide band - Reproducibility high
|
|
GB/T 2423.13-1982
|
Basic environmental testing procedures for electric and electronic products - Test Fdb: Random vibration wide band - Reproducibility medium
|
|
GB/T 2423.28-1982
|
Basic environmental testing procedures for electric and electronic products - Test T: soldering
|
|
GB/T 2423.29-1982
|
Basic environmental testing procedures for electric and electronic products - Test U: robustness of terminations and integral mounting devices
|
|
GB/T 2424.11-1982
|
Basic environmental testing procedures for electric and electronic products--Guidance for sulphur dioxide test for contacts and connections
|
|
GB/T 2424.12-1982
|
Basic environmental testing procedures for electric and electronic products--Guidance for hydrogen sulphide test for contacts and connections
|
|
GB/T 2424.18-1982
|
Basic environmental testing procedures for electric and electronic products--Guidance to test of immersion in cleaning solvents
|
|
GB/T 2423.19-1981
|
Electric and electronic products - Basic environmental test regulations for electricians - Test Kc: The sulphur dioxide method at the point of contact and the connecting element
|
|
GB/T 2423.20-1981
|
Electric and electronic products - Basic environmental test regulations for electricians - Test Kd: The hydrogen sulfide method at the point of contact and the connecting element
|
|
GB/T 2423.27-1981
|
Electric and electronic products - Basic environmental test regulations for electricians - Test Z/AMD: The successive integrated low temperature / low atmospheric pressure / damp-heat method
|
|
GB/T 2424.13-1981
|
Electric and electronic products--Basic environmental test regulations for electricians--Guidelines for temperature variation tests
|
|
GB/T 2681-1981
|
Colours of insulated conductors used in electrical assembly devices
|
|
GB/T 2682-1981
|
Colours of indicator lights and push-buttons used in electrical assembly devices
|
|
GB/T 20113-2006
|
Electrical insulation systems (EIS) -- Thermal classification
|
|
GB/T 35031.302-2022
|
Customer energy management system - Part 3-2: Data configuration of subsystem gateway
|
|
GB/T 35031.4-2022
|
Customer energy management system - Part 4: Specification for information exchange between hot and gateways
|
|
GB/T 35031.6-2019
|
Customer energy management system -- Part 6: Management indicator system
|
|
GB/T 35031.7-2019
|
Customer energy management system -- Part 7: Function classification and system gradation
|
|
GB/T 35031.1-2018
|
Customer energy management system -- Part 1: Guideline
|
|
GB/T 35031.2-2018
|
Customer energy management system -- Part 2: Functional specification of master station
|
|
GB/T 35031.301-2018
|
Customer energy management system -- Part 3-1: General requirements for subsystem gateway
|
|
GB/T 16499-2017
|
Guide for the preparation of electrical and electronic safety publications and the use of basic safety publications and group safety publications
|
|
GB/T 16499-2008
|
The Preparation of safety publication and the use of basic safety publications and group safety publications
|
|
GB/T 16499-1996
|
Guide to the drafting of electrical safety standards
|
|
GB/T 30299-2013
|
General technical specifications for energy recovery devices in reverse osmosis system
|