|
Std ID |
Description (Standard Title) |
|
GB/T 6538-2022
|
Determination of apparent viscosity of engine oils - Using the cold-cranking simulator
|
|
GB/T 6730.61-2022
|
Iron ores - Determination of carbon and sulfur content - High frequency combustion with infrared absorption method
|
|
GB/T 6730.64-2022
|
Iron ores - Determination of water soluble chloride content - Ion-selective electrode method
|
|
GB/T 6730.83-2022
|
Iron ores - Determination of loss on ignition - Gravimetric method corrected by hygroscopic water
|
|
GB/T 6983-2022
|
Magnetic iron
|
|
GB/T 712-2022
|
Structural steel for ship and ocean engineering
|
|
GB/T 7699-2022
|
Ramie
|
|
GB/T 7725-2022
|
Room air conditioner
|
|
GB/T 7740-2022
|
Natural casings
|
|
GB/T 8039-2022
|
Determination of total sulfur of coking benzole products
|
|
GB/T 8146-2022
|
Test methods for rosin
|
|
GB/T 8190.6-2022
|
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
|
|
GB/T 8423.4-2022
|
Petroleum and natural gas industries terminology - Part 4: Measurement and analysis of petroleum and natural gas
|
|
GB/T 8566-2022
|
Systems and software engineering - Software life cycle processes
|
|
GB/T 9239.23-2022
|
Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines
|
|
GB/T 9771.7-2022
|
Single-mode optical fibres for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre
|
|
GB/T 9797-2022
|
Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
|
|
GB/T 997-2022
|
Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
|
|
GB/T 18828-2022
|
Horology - Diver watches
|
|
GB/T 19671-2022
|
Safety of machinery - Two-hand control devices - Principles for design and selection
|
|
GB/T 23821-2022
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
|
|
GB/T 32484-2022
|
Watch-cases and accessories - Vapour phase deposited coatings
|
|
GB/T 40815.5-2022
|
Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with inch and metric system - Part 5: Cooling performance evaluation for indoor cabinets
|
|
GB/T 41438.3-2022
|
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
|
|
GB/T 41633.3-2022
|
Insulating liquids - Determination of acidity - Part 3: Test methods for non-mineral insulating oils
|
|
GB/T 41711-2022
|
Determination of acid resistance, sulfur resistance and salt resistance of inner coating or laminated-film in metal containers used for food
|
|
GB/T 41734.1-2022
|
Radiofrequency identification of animals - Part 1: Evaluation of conformance of RFID transponders with GB/T 20563 and GB/T 22334(including granting and use of a manufacturer code)
|
|
GB/T 41758.1-2022
|
Plastics - Polyketone (PK) moulding and extrusion materials - Part 1: Designation system and basis for specifications
|
|
GB/T 41825-2022
|
Business management specification of integrated service for MSMEs in cross-border electronic commerce
|
|
GB/T 41898-2022
|
Determination of corrosion resistance and compactness of inner coating or laminated-film in metal containers used for food - Electrochemical method
|
|
GB/T 41899-2022
|
General quality requirements for coated tinplate and ECCS used in food container
|
|
GB/T 42002-2022
|
Multilingual description of cross-border electronic commerce trading products - Smart mobile phone
|
|
GB/T 42003-2022
|
Multilingual classification and naming of cross-border E-commerce trading products - Ceramic product
|
|
GB/T 4440-2022
|
Adjustable wrenches
|
|
GB/T 4625-2022
|
Assembly tools for screws and nuts - Nomenclature
|
|
GB/T 50458-2022
|
Standard for design of straddle monorail transit
|
|
GB/T 50547-2022
|
(Technical standards for geotechnical engineering of tailings accumulation dams)
|
|
GB/T 50567-2022
|
Technical code for shell structure of ironmaking furnace
|
|
GB/T 50700-2022
|
Standard for technical renovation of small hydropower station
|
|
GB/T 50759-2022
|
(Technical standards for oil and gas recovery and treatment facilities)
|
|
GB/T 50779-2022
|
(Anti-blast design standards for petrochemical buildings)
|
|
GB/T 51424-2022
|
Standard for the design of greenhouse structure
|
|
GB/T 51429-2022
|
(Acceptance Technical Standards for Agricultural Construction Projects)
|
|
GB/T 51450-2022
|
(Metal and non-metal mine filling engineering technical standards)
|
|
GB/T 11546.2-2022
|
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
|
|
GB/T 11603-2022
|
Determination of mean diameter of wool fibres - Air permeability method
|
|
GB/T 11764-2022
|
Sunflower seed
|
|
GB/T 11942-2022
|
Test method of chroma for colour building materials
|
|
GB/T 11987-2022
|
Surface active agents - Technical alkane sulphonates - Determination of total alkane sulphonates content
|
|
GB/T 12406-2022
|
Codes for the representation of currencies
|
|
GB/T 12690.1-2022
|
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides - Part 1: Determination of carbon and sulfur contents - High frequency-infrared absorption method
|
|
GB/T 12782-2022
|
Requirement and test method of heating performance for motor vehicle
|
|
GB/T 1289-2022
|
Chemical reagent - Sodium oxalate
|
|
GB/T 12963-2022
|
Electronic-grade polycrystalline silicon
|
|
GB/T 13043-2022
|
Bus engineering approval evaluation program
|
|
GB/T 13079-2022
|
Determination of total arsenic in feeds
|
|
GB/T 13081-2022
|
Determination of mercury in feeds
|
|
GB/T 13206-2022
|
Glycerines
|
|
GB/T 13277.9-2022
|
Compressed air - Part 9: Test methods for liquid water content
|
|
GB/T 13477.22-2022
|
Test method for building sealants - Part 22: Determination of curing behaviour
|
|
GB/T 13477.23-2022
|
Test method for building sealants - Part 23: Durability to extension compression cycling under accelerated weathering
|
|
GB/T 13529-2022
|
Sodium ethoxylated alkyl sulfate
|
|
GB/T 13575.1-2022
|
Classical and narrow V-belt drives - Part 1: System based on datum width
|
|
GB/T 13575.2-2022
|
Classical and narrow V-belt drives - Part 2: Effective system
|
|
GB/T 13590-2022
|
Steel slag and granulated furnace slag Portland cement
|
|
GB/T 13747.26-2022
|
Methods for chemical analysis of zirconium and zirconium alloys - Part 26: Determination of alloying and impurity elements content - Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 13927-2022
|
Industrial valves - Pressure testing
|
|
GB/T 13957-2022
|
Technical requirements for the fundamental series of three-phase large asynchronous motor
|
|
GB/T 13958-2022
|
Test methods for small power permanent magnet synchronous motors
|
|
GB/T 14352.24-2022
|
Methods for chemical analysis of tungsten ores and molybdenum ores - Part 24: Determination of germanium content - Inductively coupled plasma mass spectrometry
|
|
GB/T 14392.1-2022
|
Layout key for international trade documents - Part 1: Paper-based documents
|
|
GB/T 14536.10-2022
|
Automatic electrical controls - Part 10: Particular requirements for temperature sensing control
|
|
GB/T 14536.1-2022
|
Automatic electrical controls - Part 1: General requirements
|
|
GB/T 14536.13-2022
|
Automatic electrical controls - Part 13: Particular requirements for electrically operated door locks
|
|
GB/T 14536.15-2022
|
Automatic electrical controls - Part 15: Particular requirements for humidity sensing control
|
|
GB/T 14536.3-2022
|
Automatic electrical controls - Part 3: Particular requirements for thermal motor protectors
|
|
GB/T 14536.6-2022
|
Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems
|
|
GB/T 1482-2022
|
Metallic powders - Determination of flow rate - Calibrated funnel methods(Hall flowmeter)
|
|
GB/T 14885-2022
|
Basic classification and codes of fixed assets and other assets
|
|
GB/T 15166.5-2022
|
High-voltage alternating-current fuse - Part 5: Application directives for high-voltage fuse-links for motor circuit
|
|
GB/T 15531-2022
|
Belt drives - Pulleys - Limiting values for adjustment of centres
|
|
GB/T 15681-2022
|
Flaxseed
|
|
GB/T 15963-2022
|
Sodium lauryl sulfate
|
|
GB/T 15970.11-2022
|
Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
|
|
GB/T 16145-2022
|
Gamma-ray spectrometry method for the determination of radionuclides in environmental and biological samples
|
|
GB/T 16491-2022
|
Electronic universal testing machines
|
|
GB/T 16711-2022
|
Banking - Banking telecommunication messages - Business identifier code(BIC)
|
|
GB/T 16850.1-2022
|
Optical amplifier test methods - Part 1: Power and gain parameters for single-channel optical amplifiers
|
|
GB/T 16857.10-2022
|
Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
|
|
GB/T 16857.12-2022
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 12: Articulated arm coordinate measurement machines(CMM)
|
|
GB/T 16857.7-2022
|
Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 7: CMMs equipped with imaging probing systems
|
|
GB/T 16857.8-2022
|
Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
|
|
GB/T 16857.9-2022
|
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems(CMS) - Part 9: CMMs with multiple probing systems
|
|
GB/T 16886.15-2022
|
Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys
|
|
GB/T 16886.18-2022
|
Biological evaluation of medical devices - Part 18: Chemical characterization of medical device materials within a risk management process
|
|
GB/T 16886.19-2022
|
Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials
|
|
GB/T 16886.9-2022
|
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products
|
|
GB/T 16895.13-2022
|
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
|
|
GB/T 16895.22-2022
|
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring
|
|
GB/T 17155-2022
|
Plate for offset printing - Dimensions
|