GB/T 13043-2022 English PDFUS$228.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13043-2022: Bus engineering approval evaluation program Status: Valid GB/T 13043: Historical versions
Basic dataStandard ID: GB/T 13043-2022 (GB/T13043-2022)Description (Translated English): Bus engineering approval evaluation program Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T42 Classification of International Standard: 43.080.20 Word Count Estimation: 14,160 Date of Issue: 2022-12-30 Date of Implementation: 2023-07-01 Older Standard (superseded by this standard): GB/T 13043-2006 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 13043-2022: Bus engineering approval evaluation program---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 43.080.20 CCST42 National Standards of People's Republic of China Replacing GB/T 13043-2006 Passenger Car Type Test Regulations Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Test conditions and test termination conditions 2 5 Test items and test methods 3 6 Test report 6 Appendix A (Normative) Routine Operation Items and Requirements 7 Appendix B (Normative) Calculation and Statistical Methods of Reliability Evaluation Indexes 8 Reference 10forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document replaces GB/T 13043-2006 "Passenger Car Type Test Regulations". Compared with GB/T 13043-2006, except for structural adjustment and Apart from editorial changes, the main technical changes are as follows. a) Changed the vehicle model definition (see 3.1, 3.1 of the.2006 edition); b) Added the terms and definitions of hybrid electric bus, pure electric bus and fuel cell electric bus (see 3.2, 3.3 and 3.4); c) Changed the test conditions and terminated the test conditions (see Chapter 4, Chapter 4 of the.2006 edition); d) The performance test items of hybrid and pure electric electric buses have been added (see 5.4); e) Deleted the special device (see 5.3.10 of the.2006 edition); f) Delete the performance retest requirements (see 5.4 of the.2006 edition); g) Changed the requirements for the number of reliability test samples (see 4.1.3, 5.5.2 of the.2006 edition); h) Changed Appendix B and added statistical methods for reliability evaluation indicators (see B.2, Appendix C of the.2006 edition); i) Deleted Appendix C (see Appendix C of the.2006 edition). Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This document is under the jurisdiction of the National Automotive Standardization Technical Committee (SAC/TC114). This document is drafted by. Yutong Bus Co., Ltd., China Road Vehicle Machinery Co., Ltd., Xiangyang Daan Automobile Testing Center Co., Ltd., China Automotive Research Institute Automobile Inspection Center (Tianjin) Co., Ltd., King Long United Automobile Industry (Suzhou) Co., Ltd., Zhongtong Bus Co., Ltd. Company, China Merchants Testing Vehicle Technology Research Institute Co., Ltd., Nanjing Jinlong Bus Manufacturing Co., Ltd., BYD Auto Industry Co., Ltd., China Car Times Electric Vehicle Co., Ltd., Beijing Foton Ouhui New Energy Automobile Co., Ltd., Xiamen Golden Dragon Touring Vehicle Co., Ltd., Shanghai Automobile Co., Ltd. Motor Vehicle Testing and Certification Technology Research Center Co., Ltd., Nanjing Iveco Automobile Co., Ltd. The main drafters of this document. Yan Weigang, Li Zongling, Yu Yali, Yang Chao, Li Yang, Bao Junjiang, Chen Guoxin, Wang Jun, Yang Songfeng, Xue Weiguang, Kuang Mingqiu, Zhang Jie, Zhang Donglong, Wang Ruchun, Wang Yunying, Lu Xiaochuan, Yang Hongxia. This document was first released in.1991, revised for the first time in.2006, and this is the second revision. Passenger Car Type Test Regulations1 ScopeThis document specifies the requirements for the passenger car type test and test termination conditions, test items, test methods and test reports. This document is applicable to the type test of M2 and M3 passenger cars.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 3730.1 Terms and Definitions of Types of Vehicles and Trailers GB/T 3730.2 Road Vehicle Quality Vocabulary and Codes GB/T 4970 Test method for vehicle ride comfort GB/T 6323 Automobile Handling Stability Test Method GB 7258 Motor vehicle operation safety technical conditions GB/T 12534 General Rules for Automobile Road Test Methods GB/T 12536 Vehicle sliding test method GB/T 12538 Determination of Center of Gravity Position of Road Vehicles with Two Axles GB/T 12539 Automobile climbing steep slope test method GB/T 12540 Automobile Minimum Turning Diameter, Minimum Turning Passage Circle Diameter and Swing Value Measurement Method GB/T 12543 Automobile Acceleration Performance Test Method GB/T 12544 Automobile maximum speed test method GB/T 12545.2 Test method for fuel consumption of commercial vehicles GB/T 12547 Automobile minimum stable speed test method GB/T 12548 Automobile speedometer, odometer inspection and calibration method GB/T 12673 Measurement methods of main dimensions of automobiles GB/T 12674 Automobile quality (weight) parameter determination method GB/T 12677 Driving inspection method for technical condition of automobiles GB/T 12782 Automobile heating performance requirements and test methods GB/T 13053 Passenger car interior dimensions GB 13094 Passenger Car Structure Safety Requirements GB/T 15089 Classification of Motor Vehicles and Trailers GB/T 18385 Test method for dynamic performance of electric vehicles GB/T 18386 (all parts) Test methods for energy consumption rate and driving range of electric vehicles GB/T 19752 Test method for dynamic performance of hybrid electric vehicles GB/T 19753 Test method for energy consumption of light-duty hybrid electric vehicles GB/T 19754 Test method for energy consumption of heavy-duty hybrid electric vehicles GB/T 26991 Maximum speed test method for fuel cell electric vehicles ...... |
