GB/T 14536.6-2022 English PDFUS$979.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14536.6-2022: Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems Status: Valid GB/T 14536.6: Historical versions
Basic dataStandard ID: GB/T 14536.6-2022 (GB/T14536.6-2022)Description (Translated English): Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K32 Classification of International Standard: 97.120 Word Count Estimation: 50,519 Date of Issue: 2022-12-30 Date of Implementation: 2023-07-01 Older Standard (superseded by this standard): GB/T 14536.6-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 14536.6-2022: Automatic electrical controls - Part 6: Particular requirements for automatic electrical burner control systems---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 97.120 CCSK32 National Standards of People's Republic of China Replacing GB/T 14536.6-2008 Electric automatic controllers Part 6. Special requirements for burner electric automatic control system Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III Introduction V 1 Scope 1 2 Normative references 2 3 Terms and Definitions 2 4 General requirements 9 5 General description of the test 9 6 rating 9 7 categories 9 8 Information 11 9 Protection against electric shock 14 10 Earth protection measures 15 11 Terminals and terminals 15 12 Structural Requirements 15 13 Moisture-proof and dust-proof 21 14 Electric strength and insulation resistance 21 15 Fever 22 16 Manufacturing deviation and drift 22 17 Environmental stress 24 18 Durability24 19 Mechanical strength 26 20 threaded parts and connections 26 21 Creepage distances, clearances and distances through solid insulation 27 22 Heat resistance, flame resistance and tracking resistance 27 23 Corrosion resistance 27 24 Electromagnetic compatibility (EMC) requirements --- launch 27 25 components 27 26 Normal operation 27 27 Electromagnetic compatibility (EMC) requirements --- immunity 27 28 Abnormal operation 27 29 Electronic Disconnect Instructions 27 Appendix 28 Appendix H (Normative) Requirements for Electronic Controllers 28 Appendix J (Normative) Requirements for thermistor components and controllers using thermistors 38 Appendix AA (informative) Functional characteristics of the burner control system specified in the relevant appliance standards (when applicable) 39 Reference 41 Figure 101 Generation of pulsed sparks 15 Figure 102 Typical installation for independent combustion air supply for room independent operation 21 Figure H.101 Voltage fluctuation test 31 Table 1 (Table 7.2 of the.2008 edition) Required information and methods for providing information 11 Table H.1 (Table 7.2 of the.2008 edition) 28 Table H.101 short-term power supply voltage change time 30 Table H.102 Test levels for electrostatic discharge 33 Table AA.1 Functional characteristics of the burner control system specified in relevant appliance standards (when applicable) 40forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is part 6 of GB/T 14536.GB/T 14536 has published the following parts. ---GB/T 14536.1-2022 Electric automatic controller Part 1.General requirements; ---GB/T 14536.3-2022 Electric automatic controller Part 3.Special requirements for motor thermal protector; ---GB/T 14536.4-2008 Household and similar electrical automatic controllers special features for thermal protectors for ballasts for fluorescent lamps Require; ---GB/T 14536.7-2010 Household and similar electric automatic controllers, special requirements for pressure-sensitive electric automatic controllers requirements, including mechanical requirements; ---GB/T 14536.8-2010 Special requirements for household and similar electric automatic controller timers and timing switches; ---GB/T 14536.9-2008 Special requirements for electric water valves with electric automatic controllers for household and similar purposes (including mechanical Require); ---GB/T 14536.10-2022 Electric automatic controllers Part 10.Special requirements for temperature-sensitive controllers; ---GB/T 14536.11-2008 Special requirements for starting relays for motors of household and similar electric automatic controllers; ---GB/T 14536.12-2010 Special requirements for household and similar electric automatic controller energy regulator; ---GB/T 14536.13-2022 Electric automatic controller Part 13.Special requirements for electric door locks; ---GB/T 14536.15-2022 Electric automatic controllers Part 15.Special requirements for humidity sensitive controllers; ---GB/T 14536.16-2013 Special requirements for household and similar electric automatic controllers and electric starters; ---GB/T 14536.17-2005 Float-type or electrode-sensitive electric controllers used in household and similar electric automatic controllers and boiler appliances Special requirements for inductive water level sensitive electric automatic controllers; ---GB/T 14536.18-2006 Electric automatic controllers for household and similar applications Float-type water level controllers for household and similar applications special requirements; ---GB/T 14536.19-2017 Special requirements for electric gas valves with electric automatic controllers for household and similar purposes, including mechanical Require; ---GB/T 14536.20-2008 Household and similar electric automatic controller water flow and air flow sensitive controller special requirements requirements, including mechanical requirements; ---GB/T 14536.21-2008 Special requirements for household and similar electric automatic controller electric oil valve, including mechanical Require. This document replaces GB/T 14536.6-2008 "Special requirements for electric automatic control systems for electric automatic controllers and burners for household and similar purposes "Requirements", compared with GB/T 14536.6-2008, except for structural adjustment and editorial changes, the main technical changes are as follows. --- Added classification requirements (see H.7); --- Added harmonic and interharmonic tests, including the power signal of the AC power port, the test status of the low frequency immunity test (see H.27.4); --- Increase the test status of the test procedure for voltage dips and interruptions (see H.27.5.1.2); --- Increased voltage fluctuation test requirements (see H.27.5.2); --- Changed the test procedures involved in radio electromagnetic field immunity (see H.27.12, H.26.12 of the.2008 edition). This document is modified to adopt IEC 60730-2-5.2013 "Electric Automatic Controllers Part 2-5.Special Specifications for Burner Electric Automatic Control Systems" Require". This document sets 1.1 Scope and 1.2 Normative References in Chapter 1 of the international document as Chapter 1 and Chapter 2 separately, and then The number of chapters and articles shall be extended. The chapters and articles of Appendix H, Appendix J, Appendix U, and Appendix V are adjusted accordingly. Compared with IEC 60730-2-5.2013, this document has structural adjustments, and appendix BB has been deleted. The following editorial changes have been made to this document. --- In order to coordinate with the existing standard, change the name of the standard to "Electric automatic controller Part 6.Characteristics of electric automatic control system for burners special requirements"; --- Included in the amendments of IEC 60730-2-5.2013/AMD1.2017 and IEC 60730-2-5.2013/AMD2.2021 content, the outer margins of the terms involved are marked with (‖); ---Deleted the notes in 3.3.127, 16.7, 18.16.102.1 and H.27.11.101 of other countries or regions that have nothing to do with my country; ---Transfer the documents that are not normatively cited in Chapter 2 to the references; --- Deleted the informative appendix BB that has nothing to do with our country. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Standardization Technical Committee of Household Automatic Controllers (SAC/TC212). This document is drafted by. Yangzhou Huaming Technology Co., Ltd., China Electric Apparatus Research Institute Co., Ltd., Hefei Midea Refrigerator Co., Ltd. Co., Ltd., Weikai Testing Technology Co., Ltd., BSH Electric (Jiangsu) Co., Ltd., Hangzhou Xingshuaier Electric Co., Ltd., Shenzhen Topband Co., Ltd., Zhejiang Youshengkang Technology Co., Ltd., Foshan Jiulong Machinery Co., Ltd., Zhejiang Youmao Technology Co., Ltd., China Quality Certification Center, Shandong Yaosi Intelligent Technology Co., Ltd., Xi'an Xumai Intelligent Appliance Technology Co., Ltd., Zhejiang Ouyi Intelligent Kitchen Co., Ltd. Company, Jiangsu Ruxin Intelligent Technology Co., Ltd., Xi'an Libeian Intelligent Technology Co., Ltd., Zhejiang Anya Intelligent Technology Co., Ltd., Shaanxi Fa Cedar Electronics Co., Ltd. The main drafters of this document. Ji Wei, Jing Yixin, Wu Jirong, Huang Weibin, Wu Hongbiao, Lu Zhaoxia, Li Junkai, Liu Xinwei, Zhu Zhouyang, Yang Lingling, Lin Yongming, Hu Jinan, Li Ji, Chen Feng, Fang Zhiming, Chen Naien, Ni Liaoyong, Nan Shaowei, Huang Qiongfang. The release status of previous versions of this document and the documents it replaces are as follows. ---It was first published as GB/T 14536.6-1996 in.1996, and it was revised for the first time in.2008; --- This is the second revision.IntroductionAutomation and intelligence are the development goals of all kinds of live equipment, and the electric automatic controller is the cornerstone of its realization. as an appliance The core components of the equipment, the inherent safety and functional safety of the electric automatic controller are closely related to the safety of personal and property. GB/T 14536 (All parts) Using the IEC 60730 series of standards, regulates the electrical safety of electrical appliances and other electrical and non-electrical equipment for household and similar purposes In the absence of specific product standards, it can also be extended to industrial applications, such as central heating, air conditioning, process heating Building automation, etc., including the following. --- Electric automatic control device, which operates mechanically, electromechanically, electrically or electronically, responds to or controls conditions such as temperature, pressure, passage of time, Parameters such as humidity, light, electrostatic effects, flow or liquid level; --- Electric automatic control devices for starting small electric motors mainly used in household and similar appliances and equipment, this control The device can be built into the motor or separate from the motor; --- Non-automatic control devices related to automatic control devices. The IEC 60730 series of standards have been revised several times, expanding the scope from household and similar electric automatic controllers to electric automatic control In China, GB/T 14536 is being revised successively according to the new version of IEC standard. The revised GB/T 14536 is proposed to be composed of the following parts Composition. ---GB/T 14536.1 Electric automatic controller Part 1.General requirements. The purpose is to generally standardize electric automatic controller products Require. ---GB/T 14536.3 Electric automatic controller Part 3.Special requirements for motor thermal protectors. The purpose is to standardize electric Machine thermal protector product requirements. ---GB/T 14536.4 Special requirements for household and similar electric automatic controllers, ballast thermal protectors for tubular fluorescent lamps. The purpose is to standardize product requirements for ballast thermal protectors for tubular fluorescent lamps. ---GB/T 14536.6 Electric automatic controller Part 6.Special requirements for electric automatic burner control system. purpose is to regulate Fan burner electric automatic control system requirements. ---GB/T 14536.7 Electric automatic controllers Part 7.Special requirements for pressure-sensitive electric automatic controllers, including mechanical requirements beg. The purpose is to standardize the product requirements of pressure-sensitive electric automatic controllers. ---GB/T 14536.8 Electric automatic controller Part 8.Special requirements for timers and time switches. The purpose is to standardize Timer and time switch product requirements. --- GB/T 14536.9 Electric automatic controller Part 9.Special requirements for electric water valves, including mechanical requirements. purpose is Standardize product requirements for electric water valves. ---GB/T 14536.10 Electric automatic controllers Part 10.Special requirements for temperature-sensitive controllers. The purpose is to standardize the temperature Sensitive controller product requirements. --- GB/T 14536.11 Special requirements for starting relays for electric motors of household and similar electric automatic controllers. purpose is Standardize product requirements for starting relays for electric motors. --- GB/T 14536.12 Electric automatic controller Part 12.Special requirements for energy regulators. The purpose is to standardize energy regulation Saver product requirements. ---GB/T 14536.13 Electric automatic controller Part 13.Special requirements for electric door locks. The purpose is to standardize electric door locks product requirement. ---GB/T 14536.15 Electric automatic controllers Part 15.Special requirements for humidity-sensitive controllers. The purpose is to regulate wet Sensitive controller product requirements. ---GB/T 14536.16 Electric automatic controller Part 16.Special requirements for electric starters. The purpose is to standardize electric starters product requirement. ---GB/T 14536.17 Electric automatic controllers Part 17.Special features for automatic electric air flow, water flow and water level sensing controllers Require. The purpose is to standardize product requirements for automatic electric air flow, water flow and water level sensing controllers. ---GB/T 14536.23 Electric automatic controller Part 23.Special requirements for electronic sensors and sensing elements. purpose is Specifies product requirements for electronic sensors and sensing elements. ---GB/T 14536.24 Electric automatic controller Part 24.Special requirements for stroke-sensitive controllers. The purpose is to standardize Process-sensitive controller product requirements. ---GB/T 14536.25 Electric automatic controllers Part 25.Special requirements for current-sensitive controllers. The purpose is to regulate the electrical Flow Sensitive Controller Product Requirements. This document is used in conjunction with GB/T 14536.1-2022.And added appendix AA, which is convenient for users to refer to relevant appliance standards The functional characteristics of the burner control system. Electric automatic controllers Part 6. Special requirements for burner electric automatic control system1 ScopeThis chapter of GB/T 14536.1-2022 applies except for the following. replace. This document applies to burner electric automatic control systems for automatic control of burners using oil, gas, coal or other fuels system, the system is used in the following situations. ---Household and similar purposes; ---Shops, offices, hospitals, farms, and commercial and industrial applications. This document is applicable to. ---A complete burner control system; --- Separate program control device; --- Separate electronic high-voltage ignition source; --- Separate flame detector; --- Separate high temperature operation (HTO) detector; --- Burner control system for warm air heating equipment (furnace), which is equipped with electromechanical pressure difference controller to monitor combustion air Pressure difference (2.AL type). This differential pressure controller provides a switch, as an alternative to one of the two switching elements, directly shutting off Power supply for safety-related terminals. Note 1.In this document, if it can be clearly used, the word "system" means "burner control system". Note 2.In this document, the term "equipment" refers to "apparatus and equipment". This document does not apply to thermoelectric flame monitoring controllers, thermoelectric flame monitoring controllers apply to ISO 23551-6. This document also applies to electrical burner control systems intended for industrial process applications, such as ISO TC244 (ISO 13577) Cover application. This document applies to controllers powered by primary or secondary batteries, and its requirements are included in standards including Appendix V. 1.1 This document is applicable to the electric automatic combustion control system related to the safety of the burner and used in, on or in connection with the burner Intrinsic safety, declared operating values, operating times, and operating sequences related to systematic testing. Note. Requirements for specific operating values, operating time and operating sequence are given in the appliance and equipment standards. 1.2 This document applies to AC power supply systems with a rated voltage not exceeding 660V or DC power supply systems with a rated voltage of 600V. 1.3 If the response value of the automatic action of the controller depends on the method of installing the controller in the equipment, this document does not consider the response value. If the response value is important to protect the user or the surrounding environment, the value defined in the relevant equipment standard or the value declared by the supplier is also Be applicable. 1.4 This document also applies to systems containing electronic devices, see Appendix H for requirements. 1.5 This document applies to systems using negative temperature coefficient thermistors (NTC) or positive temperature coefficient thermistors (PTC). According to Appendix J. 1.6 This document covers HTO flame characteristics and temperature response systems. 1.7 This document applies to the electrical and functional safety of controllers capable of receiving and responding to communication signals. signal can be transmitted to an externally mounted can also be received from an external device. External devices are connected by wire or wirelessly, these devices may be part of the burner control system ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14536.6-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 14536.6-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14536.6-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14536.6-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14536.6-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14536.6-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
