|
Std ID |
Description (Standard Title) |
|
GB/T 3836.21-2017
|
Explosive atmospheres -- Part 21: Application of quality systems for equipment manufacture
|
|
GB/T 3836.23-2017
|
Explosive atmospheres -- Part 23: Group Ⅰ, category EPL equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
|
|
GB/T 3836.5-2017
|
Explosive atmospheres -- Part 5: Equipment protection by pressurized enclosure "p"
|
|
GB/T 3854-2017
|
Test method for hardness of reinforced plastics by means of a Barcol impresser
|
|
GB/T 3883.201-2017
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 2: Particular requirements for drills and impact drills
|
|
GB/T 3883.306-2017
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 3: Particular requirements for transportable diamond drills with liquid systems
|
|
GB/T 3883.403-2017
|
Safety of motor-operated hand-held, transportable and garden tools -- Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
|
|
GB/T 4181-2017
|
Tungsten wires
|
|
GB/T 4185-2017
|
Molybdenum-tungsten alloy bars and rods
|
|
GB/T 4187-2017
|
Tungsten bars and rods
|
|
GB/T 4188-2017
|
Molybdenum bars and molybdenum rods
|
|
GB/T 4194-2017
|
Creep testing, high temperature treatment and metallographic examination of the tungsten wire
|
|
GB/T 11198.14-1989
|
Sulphuric acid for industrial use--Determination of transparency
|
|
GB/T 4459.7-2017
|
Technical drawings -- The detailed simplified representation of rolling bearings
|
|
GB/T 4510-2017
|
Test method for breaking point of bitumen -- Fraass method
|
|
GB/T 4588.4-2017
|
Sectional specification for rigid multilayer printed boards
|
|
GB/T 4723-2017
|
Phenolic cellulose paper copper clad laminated sheets for printed circuit
|
|
GB/T 4724-2017
|
Composite base copper clad laminated sheets for printed circuits
|
|
GB/T 4776-2017
|
Electrical safety terminology
|
|
GB/T 5096-2017
|
Test method for corrosiveness to copper from petroleum products by copper strip test
|
|
GB/T 5195.1-2017
|
Fluorspar -- Determination of calcium fluoride content -- EDTA titration method and distillation-potentiometric titration method
|
|
GB/T 5195.13-2017
|
Fluorspar -- Determination of aluminium content -- EDTA titration method
|
|
GB/T 5195.14-2017
|
Fluorspar -- Determination of magnesium content -- Flame atomic absorption spectrometry
|
|
GB/T 5195.15-2017
|
Fluorspar -- Determination of calcium, aluminum, silicon, phosphorus, sulfur, potassium, iron, barium and lead content -- Wavelength dispersive X-ray fluorescence spectrometric method
|
|
GB/T 5195.16-2017
|
Fluorspar -- Determination of silicon, aluminum, iron, potassium, magnesium and titanium content -- Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 5195.3-2017
|
Fluorspar -- Determination of loss in mass at 105 ℃ -- Gravimetric method
|
|
GB/T 5195.5-2017
|
Fluorspar -- Determination of total sulfur content -- Pipe furnace combustion iodic acid potassium titration method
|
|
GB/T 5282-2017
|
Slotted pan head tapping screws
|
|
GB/T 5283-2017
|
Slotted countersunk (flat) head tapping screws
|
|
GB/T 5284-2017
|
Slotted raised countersunk (oval) head tapping screws
|
|
GB/T 5285-2017
|
Hexagon head tapping screws
|
|
GB/T 5565.1-2017
|
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperatures
|
|
GB/T 5565.2-2017
|
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures
|
|
GB/T 5565.3-2017
|
Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures
|
|
GB/T 5742-2017
|
Filling connection for drinking water tanks on ships
|
|
GB/T 6113.201-2017
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity -- Conducted disturbance measurements
|
|
GB/T 6730.26-2017
|
Iron ores -- Determination of fluorine content -- Thorium nitrate titrimetric method
|
|
GB/T 6730.27-2017
|
Iron ores -- Determination of fluorine content -- Lanthanum-alizarin complexion spectrophotometric method
|
|
GB/T 6730.30-2017
|
Iron ores -- Determination of chromium content -- Diphenyl carbazide spectrophotometric method
|
|
GB/T 6730.31-2017
|
Iron ores -- Determination of vanadium -- N-benzoyl-N-phenylhydroxylamine extraction spectrophotometric method
|
|
GB/T 6730.34-2017
|
Iron ores -- Determination of tin content -- Pyrocatechol violet cetyl trimet hylamine bromide spectrophotometric method
|
|
GB/T 6730.37-2017
|
Iron ores -- Determination of cobalt content--4-[(5-chloro-2-pyridyl) azo]-1, 3-diamino-benzene spectrophotometric method
|
|
GB/T 6730.38-2017
|
Iron ores -- Determination of cobalt content -- Nltroso-R salt spectrophotometric method
|
|
GB/T 6730.39-2017
|
Iron ores -- Determination of nickel content -- Dimetylglyoxime spectrophotometric method
|
|
GB/T 6730.42-2017
|
Iron ores -- Determination of lead content -- Dithizone spectrophotometric method
|
|
GB/T 6730.44-2017
|
Iron ores -- Determination of zinc content-1- (2-pyridylazo) -2-naphthol spectrophotometric method
|
|
GB/T 6730.47-2017
|
Iron ores -- Determination of niobium content -- Sulfochlorophenol S spectrophotometric method
|
|
GB/T 6730.58-2017
|
Iron ores -- Determination of vanadium content -- Flame atomic absorption spectrometric method
|
|
GB/T 6730.59-2017
|
Iron ores -- Determination of manganese content -- Flame atomic absorption spectrometric method
|
|
GB/T 6730.74-2017
|
Iron ores -- Determination of magnesium content -- Flame atomic absorption spectrometric method
|
|
GB/T 6911-2017
|
Determination of sulfate in water for industrial circulating cooling system and boiler
|
|
GB/T 7251.5-2017
|
Low-voltage switchgear and controlgear assemblies -- Part 5: Assemblies for power distribution in public networks
|
|
GB/T 73-2017
|
Slotted set screws with flat point
|
|
GB/T 7321-2017
|
Sample preparation for testing of shaped refractory products
|
|
GB/T 7322-2017
|
Refractory products -- Determination of refractoriness
|
|
GB/T 7343-2017
|
Methods of measurement of the suppression characteristics of passive EMC filtering devices
|
|
GB/T 7377-2017
|
Series of cycle tyres
|
|
GB/T 7676.1-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 1: Definitions and general requirements common to all parts
|
|
GB/T 7676.2-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 2: Special requirements for ammeters and voltmeters
|
|
GB/T 7676.3-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 3: Special requirements for watt meters and varmeters
|
|
GB/T 7676.4-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 4: Special requirements for frequency meters
|
|
GB/T 7676.5-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 5: Special requirements for phase meters, power factor meters and synchro-scopes
|
|
GB/T 7676.6-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
|
|
GB/T 7676.7-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 7: Special requirements for multi-function instruments
|
|
GB/T 7676.8-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 8: Special requirements for accessories
|
|
GB/T 7676.9-2017
|
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 9: Recommended test methods
|
|
GB/T 7764-2017
|
Rubber identification -- Infrared spectrometric method
|
|
GB/T 7932-2017
|
Pneumatic fluid power -- General rules and safety requirements for systems and their components
|
|
GB/T 8188-2017
|
Reciprocating internal combustion engines -- Emissions terminology and nomenclature
|
|
GB/T 8190.9-2017
|
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
|
GB/T 8423.5-2017
|
Petroleum and natural gas industries terminology -- Part 5: Equipment and material
|
|
GB/T 847-2017
|
Cross-recessed raised countersunk (oval) head tapping screws
|
|
GB/T 8845-2017
|
Dies and moulds -- Terminology
|
|
GB/T 917-2017
|
Mark rules of highway route and number of national trunk highway
|
|
GB/T 9390-2017
|
Terminology for navigation
|
|
GB/T 9553-2017
|
Jingangmycin A aqueous solution
|
|
GB/T 9574-2017
|
Rubber and plastics hoses and hose assemblies -- Ratios of proof and burst pressure to maximum working pressure
|
|
GB/T 10942-2017
|
Refrigerated bulk milk tanks
|
|
GB/T 11373-2017
|
Thermal spraying -- Pre-treatment of surfaces of metallic parts and components
|
|
GB/T 15370.7-2017
|
Agricultural tractors -- General requirement -- Part 7: Three-wheel boat tractors
|
|
GB/T 15902-2017
|
Conveyor belts -- Determination of elastic and permanent elongation and calculation of elastic modulus
|
|
GB/T 16766-2017
|
Basic terminology in travel and tourism
|
|
GB/T 11198.15-1989
|
Sulphuric acid for industrial use--Determination of colourity
|
|
GB/T 18211-2017
|
General requirements for safety of electrical micro-machines
|
|
GB/T 19498-2017
|
Protective structures on agricultural and forestry tractors -- Static testing method and accepting condition
|
|
GB/T 11198.2-1989
|
Sulphuric acid for industrial use--Determination of ash--Gravimetric method
|
|
GB/T 20306-2017
|
Amusement devices terminology
|
|
GB/T 20848-2017
|
Mooring chain
|
|
GB/T 21334-2017
|
Classification and planning fundamental requirements of logistics park
|
|
GB/T 21958-2017
|
Wheeled tractor -- Front drive axle
|
|
GB/T 22511-2017
|
Aluminum bottles packaging for chemical products
|
|
GB/T 23677-2017
|
Light conveyor belts
|
|
GB/T 25026-2017
|
Structure, main size and basic parameters of one-piece glass-lined steel vessels with agitator
|
|
GB/T 2675-2017
|
Map paper
|
|
GB/T 29024.4-2017
|
Determination of particle size distribution -- Single particle light interaction methods -- Part 4: Light scattering airborne particle counter for clean spaces
|
|
GB/T 3325-2017
|
General technical requirements for metal furniture
|
|
GB/T 34022-2017
|
Small-scale play facilities -- Three-dimensional climbing net
|
|
GB/T 34274-2017
|
Safety requirements of carriers for passenger transportation by rope
|
|
GB/T 34333-2017
|
Refractory products -- Determination by inductively coupled plasma atomic emission spectrometry (ICP-AES)
|
|
GB/T 34335-2017
|
General standard for management of scenic and historic areas
|