GB/T 34333-2025 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 34333-2025: Refractories - Chemical analysis by inductively coupled plasma atomic emission spectrometry(ICP-AES) Status: Valid GB/T 34333: Historical versions
Basic dataStandard ID: GB/T 34333-2025 (GB/T34333-2025)Description (Translated English): Refractories - Chemical analysis by inductively coupled plasma atomic emission spectrometry(ICP-AES) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q40 Classification of International Standard: 81.080 Word Count Estimation: 22,219 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 34333-2017 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 34333-2025: Refractories - Chemical analysis by inductively coupled plasma atomic emission spectrometry(ICP-AES)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT34333-2025 ICS 81.080 CCSQ40 National Standard of the People's Republic of China Replaces GB/T 34333-2017 Inductively Coupled Plasma Atomic Emission Scanning of Refractory Materials Spectroscopic (ICP-AES) chemical analysis method spectrometry (ICP-AES) Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 2 3 Terms and Definitions 2 4 Principle 2 5 General Principles 2 6 Instruments and Equipment 4 7 Sample Preparation 4 8 Reagents 4 9 Preparation of standard solution 5 10 Preparation of matrix solution 8 11 Test Step 9 12 Result calculation 10 13 Test Report 10 Appendix A (Normative) Analytical Value Acceptance Procedure 11 Appendix B (Informative) Series of Standard Solutions Examples 12 Appendix C (Informative) Instrument Reference Working Conditions 15 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 34333-2017 "Analysis Method of Refractory Materials by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES)" Compared with GB/T 34333-2017, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope of application has been changed, 16 analytical items such as Li2O and their applicable measurement ranges have been added, and the scope of K2O and Na2O has been expanded. Determination range, the method detection limit of each test item is given (see Chapter 1, Chapter 1 of the.2017 edition); b) Deleted the requirements for inductively coupled plasma atomic emission spectrometers (see 3.1 of the.2017 edition); c) Added requirements for reagents and test water (see 5.1); d) Added the allowable deviation requirement for analytical values when the content is less than or equal to 0.1% (see 5.5.2); e) Added requirements for sample preparation tools, equipment and media (see 7.2.3); f) Added the provisions on reagents (see Chapter 8); g) Deleted the provisions on optimization of instrument working conditions (see Chapter 9 of the.2017 edition); h) Added the types and methods of preparing standard solutions (see Chapter 9); i) Added the types and methods of preparing matrix solutions (see Chapter 10). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Refractory Materials (SAC/TC193). This document was drafted by. Sinosteel Luoyang Refractory Research Institute Co., Ltd., Zhejiang Zili High Temperature Technology Co., Ltd., Changxing Xingying New Refractory Building Materials Co., Ltd. and Mingguang Ruier Jingda Technology Co., Ltd. The main drafters of this document are. Xu Xiaoying, Cao Haijie, Duan Xueke, Yu Yan, Xu Gao, Xu Ruitu, Zhang Yanli, Zhu Dongdong, Wang Qiang, Xu Xiaohan, Ao Ping, Chen Qin, He Rusheng, and Wang Xiaoli. This document was first published in.2017 and this is the first revision. Inductively Coupled Plasma Atomic Emission Scanning of Refractory Materials Spectroscopic (ICP-AES) chemical analysis method Warning. Personnel using this document should have practical experience in regular laboratory work and be familiar with the physical and chemical properties of strong acids and bases. Sample Pretreatment High temperatures, strong acids and strong alkalis in the process are all dangerous sources, and workers must master their safe operating procedures. This document does not indicate all possible safety hazards. For safety issues, users are responsible for taking appropriate safety and health measures and ensuring that the conditions stipulated by relevant national laws and regulations are met.1 ScopeThis document describes the determination of silicon oxide, aluminum oxide, and Analysis methods for chemical components such as calcium and magnesium oxide. This document is applicable to refractory raw materials and their preparation methods such as silicon-alumina refractory materials, zirconium-containing refractory materials, magnesia-containing refractory materials, carbon-containing refractory materials, etc. The detection limit and determination range of the method are shown in Table 1. Table 1 Detection limit and measurement range of the method Analysis Project Method detection limit (mass fraction) content (mass fraction) Analysis Project Method detection limit (mass fraction) content (mass fraction) Al2O3 0.001 ≤10 P2O5 0.002 ≤10 SiO2 0.002 ≤10 V 0.001 ≤5 Fe2O3 0.0005 ≤10 Co 0.001 ≤5 CaO 0.001 ≤10 Nb 0.002 ≤5 MgO 0.002 ≤10 Ni 0.0005 ≤5 TiO2 0.001 ≤10 Mo 0.002 ≤5 K2O 0.001 ≤10 Cu 0.002 ≤5 Na2O 0.001 ≤10 Cd 0.0005 ≤5 Cr2O3 0.001 ≤15 Zn 0.001 ≤5 ZrO2 0.001 ≤10 Sn 0.001 ≤5 HfO2 0.001 ≤10 As 0.002 ≤5 Y2O3 0.001 ≤15 Ba 0.0005 ≤5 MnO 0.0005 ≤10 Sr 0.002 ≤5 Li2O 0.002 ≤10 Pb 0.002 ≤5 B2O3 0.002 ≤15 W 0.001 ≤5 Note. Metal oxides not listed above or metal oxides whose content exceeds the specified value shall be determined after verification of precision and accuracy. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 34333-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 34333-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 34333-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 34333-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 34333-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 34333-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
