GB/T 3883.403-2017 English PDFUS$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3883.403-2017: Safety of motor-operated hand-held, transportable and garden tools -- Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Status: Valid
Basic dataStandard ID: GB/T 3883.403-2017 (GB/T3883.403-2017)Description (Translated English): Safety of motor-operated hand-held, transportable and garden tools -- Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K64 Classification of International Standard: 25.140.20 Word Count Estimation: 30,330 Date of Issue: 2017-07-31 Date of Implementation: 2018-02-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 3883.403-2017: Safety of motor-operated hand-held, transportable and garden tools -- Part 4: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Safety of motor-operated hand-held, transportable and garden tools - Part 4. Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers ICS 25.140.20 K64 National Standards of People's Republic of China Replacing GB/T 4706.54-2008 Handheld, portable power tools and Garden tools safety Part 4. Walk-behind and hand-held lawn trimmers, Lawn trimming machine special requirements Safetyofmotor-operatedhand-held, transportableandgardentools- Part 4.Particularrequirementsforwalk-behindandhand-held 2017-07-31Published.2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 General Requirements 2 5 test conditions 2 6 Radiation, toxicity and similar hazards 2 7 Categories 2 8 signs and instructions 3 9 to prevent access to live parts protection 4 10 start 4 11 Input power and current 4 12 fever 4 13 Heat resistance and flame retardancy 4 14 moisture resistance 4 15 rust 4 16 Transformer and its related circuit overload protection 4 Durability 5 18 is not normal operation 5 19 Mechanical danger 5 20 mechanical strength 6 21 structure 7 Internal wiring 8 23 component 9 24 power line and external cords 9 25 External wire connection terminal 9 Grounding device 27 screws and connectors 9 Creepage distance, clearance and insulation penetration 9 Appendix 13 Appendix I (informative) Measurement of noise and vibration 13 Appendix K (Normative) Battery-operated tools and battery pack 20 Appendix L (normative) to provide power connection or non-isolated battery-powered tools and battery pack 21 Appendix AA (informative) Examples of materials and structures meeting artificial ground requirements 22 References 24 ForewordGB/T 3883 "hand-held, portable power tools and garden tools safety standards" Part 4 of the product involved is garden electric The tool, initially estimated to consist of the following eight components. --- Part 4. Chainsaw's special requirements; --- Part 4. Pruning shears specific requirements; --- Part 4. Pedestrian and hand-held lawn trimmers, lawn trimmer-specific requirements; --- Part 4. Scissors-type grass shears dedicated requirements; --- Part 4. Pedestrian control of the electric lawn ripper and loose sand machine special requirements; --- Part 4. Particular requirements for walking controlled electric lawn mowers; --- Part 4. Handheld electric gardening with chip blowing machine, chip suction machine and blowing suction dual-use machine's special requirements; --- Part 4. Intelligent mower specific requirements. This section GB/T 3883 Part 4. Walk and hand-held lawn trimmer, lawn trimmer-specific requirements. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 4706.54-2008 "Household and similar electrical appliances Safety Part 2. Pedestrian and hand-held lawn Finishing machine, lawn trimming machine special requirements ", and GB/T 4706.54-2008 main technical differences are. --- Foreword. General requirements for safety by the use of GB 4706.1-2005 "Household and similar electrical appliances safety Part 1. Pass With the requirements of "to adopt GB/T 3883.1-2014" hand-held, portable power tools and garden tools Safety Part 1 Points. General requirements ", the standard name has also made the corresponding changes; --- Terminology and definitions to delete "normal work" "power switch" (2008 version 3.1.9,3.108); --- Remove the Appendix AA, some of its contents will be moved to signs and instructions (see 8.2); add "walking and hand-held lawn trimmer, Lawn Trimming Machine Safety Warning "(see 8.14.1.1); revising the instructions for use [see 8.14.2a)]; --- Remove the normal operation of the heating load under the conditions (2008 version 11.5); --- Abnormal operation Modify GB/T 3883.1-2014 Table 4 (see 18.8,.2008 edition 19); --- Modify the structure of the handle on the request, move to the mechanical hazard chapter (see 19. 102,.2008 edition 22.36); --- Deletion of components "The switch operated by the cutting device controller for switching on the motor shall have at least 3mm total contact Open distance, the application of unipolar or bipolar disconnect. (2008 version 24.1.3); modify the cable coupler power cord length (see 24.1,.2008 edition 25.5); --- Appendix Appendix BB and Appendix CC merged into Appendix I; --- Move the contents of Appendix DD to Appendix AA; --- Delete Appendix B, Appendix D, Appendix I, Appendix EE. This section should GB/T 3883.1-2014 "hand-held, portable power tools and garden tools Safety Part 1. General Seeking "together. This section states the "applicable" part, said the corresponding provisions of GB/T 3883.1-2014 applicable; this section states the "replacement" part, The provisions of this section shall prevail; this section states the "amendment" part of the corresponding provisions of GB/T 3883.1-2014 related The content should be modified in this section shall prevail, and the other sections of the provisions still apply; This section states the "added" part, that in addition to In line with the corresponding provisions of GB/T 3883.1-2014, but also comply with the provisions of this section. This part is proposed by China Electrical Equipment Industry Association. This part of the National Standardization Technical Committee of electric tools (SAC/TC68) centralized. This part of the main drafting unit. Shanghai Electric Tools Institute, Beixitou Cixi Electric Tools Co., Ltd., Quan Feng (China) Trading Limited, Hongda Group Co., Ltd., Golden Harvest Tools Co., Ltd., Makita (China) Co., Ltd., Suzhou Po-electric tools Co., Ltd. was. The main drafters of this section. Gu Jing, Yu Liming, Li Bang Association, Chen Qin, Pan Shunfang, Jiang Pengfei, Lu Yunfeng, Zhou Yuan, Ding Yucai, Chen Jianqiu. Handheld, portable power tools and Garden tools safety Part 4. Walk-behind and hand-held lawn trimmers, Lawn trimming machine special requirements1 ScopeIn addition to the following provisions, GB/T 3883.1-2014 of this chapter apply. 1.1 increase. This section applies to walking and hand-held lawn trimmers, lawn trimming machine, which has non-metallic fiber rope cutting elements or free return Rotating non-metallic cutting devices, respectively, not more than 10J of kinetic energy, mowing by standing operators, their rated voltage AC Not more than 250V or DC not more than 75V. NOTE The kinetic energy calculation method for this part is given in 21.103. This section does not apply to. --- Cutting device is different from the above cutting device scissors lawn trimmer and lawn trimming machine; --- Lawn trimming machine and lawn trimming machine with collecting device; --- Self-made lawn trimming machine and lawn trimming machine.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. In addition to the following provisions, GB/T 3883.1-2014 of this chapter apply. increase. GB/T 17248.2-1999 Noise emitted by acoustic machinery and equipment Working position and other designated positions Measured emission sound pressure level An engineering approach that approximates a free field above the reflecting surface (eqvISO 11201.1995) Sound absorption in acoustical reverberation rooms (ISO 354.2003, IDT) GB/T 20247-20063 Terms and definitionsIn addition to the following provisions, GB/T 3883.1-2014 of this chapter apply. 3.101 Handheld trimmer handheldtrimmer Hold with hand, you can use wheels, pulleys or straps and other auxiliary tools, it is configured to hold without the operator, it can not be maintained at Operating position. 3.102 Walking trimmer walk-behindtrimmer A tool that is supported by the ground and controlled by the operator on foot in the rear, which is configured to be held in an operating position without an operator's hold. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3883.403-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 3883.403-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3883.403-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3883.403-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
