GB/T 6730.74-2017 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6730.74-2017: Iron ores -- Determination of magnesium content -- Flame atomic absorption spectrometric method Status: Valid
Basic dataStandard ID: GB/T 6730.74-2017 (GB/T6730.74-2017)Description (Translated English): Iron ores -- Determination of magnesium content -- Flame atomic absorption spectrometric method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D31 Classification of International Standard: 73.060.10 Word Count Estimation: 14,153 Date of Issue: 2017-09-07 Date of Implementation: 2018-06-01 Older Standard (superseded by this standard): GB/T 6730.14-1986 Partly Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 6730.74-2017: Iron ores -- Determination of magnesium content -- Flame atomic absorption spectrometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Iron ores - Determination of magnesium content - Flame atomic absorption spectrometric method ICS 73.060.10 D31 National Standards of People's Republic of China Partially replace GB/T 6730.14-1986 Iron ores - Determination of magnesium content Flame atomic absorption spectrometry (ISO 10204.2006, Ironores-Determinationofmagnesium- Flameatomicabsorptionspectrometricmethod, MOD) 2017-09-07 Posted 2018-06-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 6730 "iron ore" is divided into dozens of sections. This section GB/T 6730 Part 74. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part Replaces GB/T 6730.14-1986 "Iron ore chemical analysis atomic absorption spectrophotometric determination of calcium and magnesium," the magnesium Determination of content, this part compared with GB/T 6730.14-1986, in addition to editorial changes, the main technical changes are as follows. --- Removed the original standard determination of calcium content; --- Added "warning", "1 Scope" and "2 normative references"; --- Measurement range from "0.005% ~ 1.2%" to "0.03% ~ 3.50%"; --- Increasing the preparation of lanthanum chloride solution; --- 1986 version of 2.10 "base solution" was modified; --- 1986 version 5.2 "Weigh 0.2000g sample" was revised to "Weigh 0.50g sample, accurate to 0.0002g", the test solution Sub-points and a variety of reagents added amount has also been adjusted accordingly; --- Repetitive limit r and reproducibility limit R instead of the original standard allowable difference. This section uses the redrafted law Amendment uses ISO 10204.2006 "Determination of magnesium content in iron ore Flame atomic absorption spectrometry law". This part of the technical differences with ISO 10204.2006 and its reasons are as follows, the provisions of these differences have been adopted in its outside page The vertical single line (|) at the margin is marked. --- On the normative references, this section made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows. ● increase the reference GB/T 6379.1 (see 8.3.1); ● increase the reference GB/T 6379.2 (see 8.3.1); ● increase the reference GB/T 6682 (see Chapter 4); ● Replace ISO 7764 cited in ISO 10204-2006 with GB/T 6730.1 equivalent to international standards (see 6.1 and 6.2); ● increase the reference GB/T 7728 (see 5.4); ● increase the reference GB/T 8170 (see 8.3.5); ● Replace ISO 3082 (see 6.1) cited in ISO 10204.2006 with GB/T 10322.1 equivalent to the International Standard; ● ISO 648 referenced in ISO 10204.2006 is deleted (see Chapter 5 of ISO 10204-2006); ● Use ISO /IEC 12406 instead of ISO 10420 (see para. 5 Chapter), GB/T 12806 Compared with ISO 1042, the main technical differences are the appearance of the product requirements and inspection rules; ● increase the reference GB/T 12807 (see Chapter 5); ● Increased reference to GB/T 12808 (see Chapter 5). --- The measurement range has been adjusted from "0.25% ~ 3.5%" to "0.03% ~ 3.50%" because the product analysis is required And the lower limit of the method can meet the requirements (see Chapter 1); --- In the preparation of the end of the liquid, said the sample was changed from "10g" to "5g", because more in line with the actual analysis of the sample requirements (see 4.9); --- Reagents and materials, the new method of preparation Second, the preparation of strontium chloride solution, the reason is easy to practical application (see 4.10); --- Reagents and materials, the new method of preparation Second, the method of preparation of magnesium standard solution with magnesium oxide, the reason is easy to practical application (see 4.11); --- In the sample volume, 1g (accurate to 0.0002g) adjusted to 0.50g (accurate to 0.0002g), because 0.50g sample amount To meet the analytical requirements (see 7.2); --- In the analysis step, an increase of fluoride high sample processing, because China has a high fluorine iron ore products (see 7.4.1); --- Magnesium calibration solution preparation, the.200mL volumetric flask was modified to 100mL volumetric flask, the volume of solution taken to adjust accordingly, the reason Is consistent with the analytical requirements (see 7.4.4); --- In the analysis step, will be assigned to the sample "fixed volume in.200mL volumetric flask" to "fixed volume in 100mL volumetric flask" because In accordance with the analytical requirements (see 7.4.3.2). This part is proposed by China Iron and Steel Association. This part of the National Iron Ore and Direct Reduced Iron Standardization Technical Committee (SAC/TC317) centralized. This part of the drafting unit. Liaoning Exit Inspection and Quarantine, Jiangsu Iron and Steel Research Institute Co., Ltd. Sha Steel, Jiangsu Sha Steel Group Limited the company. The main drafters of this section. Hu Xiaojing, Fu Yao, Sheng Xiangjun, Zeng Ze, Chen Xin, Yang Yu, Ren Liang, Zhong Zhiguang, Zhang Lin, Tang Zhi Kun, Hu Xianjun, Lu Na Ping, Zhang Lifen, Song saw the peak. This part replaces the standards previously issued as. --- GB/T 6730.14-1986. Iron ores - Determination of magnesium content Flame atomic absorption spectrometry Warning --- personnel using this section should have formal laboratory work experience. This section does not indicate all possible safety issues question. It is the user's responsibility to take appropriate safety and health measures and to ensure compliance with the requirements of the relevant state laws and regulations.1 ScopeGB/T 6730 provisions of this part of the flame atomic absorption spectrometry determination of magnesium content. This section applies to natural iron ore, iron ore, sinter and pellets Determination of magnesium content, determination range (mass fraction). 0.03% ~ 3.50%.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6379.1 accuracy and accuracy of measurement methods (accuracy and precision) Part 1. General and definitions (GB/T 6379.1-2004, ISO 5725-1.1994, IDT) GB/T 6379.2 Accuracy (accuracy and precision) of measurement methods and results - Part 2. Determination of the weight of standard measurement methods Fundamental methods of renaturation and reproducibility (GB/T 6379.2-2004, ISO 5725-2.1994, IDT) GB/T 6682 analytical laboratory water specifications and test methods (GB/T 6682-2008, ISO 3696.1987, MOD) GB/T 6730.1 Preparation of pre-dried samples for iron ore analysis (GB/T 6730.1-2016, ISO 7764.2006, IDT) GB/T 7728 chemical analysis of chemical products - General rules of flame atomic absorption spectrometry GB/T 8170 rounded repair rules and limit values of the representation and judgment GB/T 10322.1 Iron ore sampling and sample preparation methods (GB/T 10322.1-2014, ISO 3082.2009, IDT) GB/T 12806 laboratory glassware single standard line volumetric flask (GB/T 12806-2011, ISO 1042.1998, NEQ) GB/T 12807 Laboratory glassware graduated pipette (GB/T 12807-1991, neqISO 835.1981) GB/T 12808 laboratory glassware single standard pipette3 principleSample to hydrochloric acid, nitric acid decomposition, evaporated to dryness. Acid insoluble residue by hydrofluoric acid, sulfuric acid treatment, sodium carbonate melting at high temperature, with the main liquid and. In a certain acidity, lanthanum chloride or strontium chloride as a release agent, Atomic absorption spectrophotometer wavelength of 285.2nm Department, the use of air - The acetylene flame was measured for absorbance of magnesium, and the mass fraction of magnesium was calculated on the calibration curve.4 Reagents and materialsUnless otherwise indicated in the analysis, only the use of approved analytical grade reagents and secondary water GB/T 6682 regulations or with its purity Water. 4.1 anhydrous sodium carbonate. 4.2 hydrochloric acid, ρ≈1.19g/mL. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6730.74-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 6730.74-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6730.74-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6730.74-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
