GB/T 7322-2017 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 7322-2017: Refractory products -- Determination of refractoriness Status: Valid GB/T 7322: Historical versions
Basic dataStandard ID: GB/T 7322-2017 (GB/T7322-2017)Description (Translated English): Refractory products -- Determination of refractoriness Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q40 Classification of International Standard: 81.080 Word Count Estimation: 10,157 Date of Issue: 2017-09-07 Date of Implementation: 2018-08-01 Older Standard (superseded by this standard): GB/T 7322-2007 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 7322-2017: Refractory products -- Determination of refractoriness---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Refractory products - Determination of refractoriness ICS 81.080 Q40 National Standards of People's Republic of China Replacing GB/T 7322-2007 Refractory fire resistance test methods [ISO 528.1983, Refractoryproducts-Determinationofpyrometriccone equivalent (refractoriness), MOD] 2017-09-07 Posted 2018-08-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 7322-2007 "refractories refractory test method", compared with GB/T 7322-2007, the main technical The changes are as follows. --- Removed terms and definitions; --- Increased thermocouple and temperature measuring instruments, test sieve, optical pyrometer requirements; --- Modify the size of the test cone, consistent with the GB/T 13794 standard temperature cone; --- Remove the test cone method to cut the sample preparation; --- Increased direct measurement method test steps. This standard uses redrafted Law Amendment uses ISO 528.1983 "refractory products standard conical equivalent value (refractoriness) Determination." in Appendix A is given in this standard reg number and ISO 528.1983 Chapter reg number control list. This standard is given in Appendix B Technical differences with ISO 528.1983 and list of causes. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard by the National Refractory Standardization Technical Committee (SAC/TC193) and focal point. This standard was drafted unit. Sinosteel Luoyang Institute of Refractories Co., Ltd., Luoyang Shi Rui generous heat-resistant test equipment Limited Secretary, Anhui Ruitai New Material Technology Co., Ltd. The main drafters of this standard. Chen Wei, Tan Lihua, Li Feng, Zhang Yi, Song Yan Yan, Chen Xuefeng, Wang Lei, Hu Jianhui. This standard replaces the standards previously issued as. --- GB 7322-1987, GB/T 7322-1997, GB/T 7322-2007. Refractory fire resistance test methods1 ScopeThis standard specifies the refractories refractory test method of principle, equipment, sample preparation, the choice of standard temperature cone, the cone of equipment, Test procedure and test report. This standard applies to refractory materials and products refractory determination.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 4513.2 amorphous refractory part 2. Sampling (GB/T 4513.2-2017, ISO 1927-2.2012, IDT) GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1. Wire mesh sieve test sieves (GB/T 6003.1-2012, ISO 3310-1.2000, MOD) GB/T 7321 shaped refractory products sample preparation method GB/T 8170 rounded repair rules and limit values of the representation and judgment GB/T 10325 Shaped refractory products sampling inspection rules (GB/T 10325-2012, ISO 5022.1979, NEQ) GB/T 13794 standard temperature cone (GB/T 13794-2017, ISO 1146.1988, MOD) GB/T 16839.1 Thermocouples Part 1. Index Table (GB/T 16839.1-1997, IEC 584-1.1995, IDT) GB/T 16839.2 Thermocouples Part 2. Tolerance (GB/T 16839.2-1997, IEC 584-2.1982, IDT) GB/T 17617 refractory raw materials and amorphous refractory samples (GB/T 17617-1998, neqISO 8656-1.1988)3 principleThe refractory test cone and the known fire resistance standard temperature cone planted together in the frustum, under the conditions specified in the heating and comparison Test cone and the standard temperature cone bending state or through the thermocouple test cone bending temperature when the test cone to reflect the refractoriness.4 device4.1 test furnace Vertical tubular furnace or box furnace. The maximum cone temperature in the space occupied by the test should not exceed 10 ℃ (equivalent to GB/T 13794 semi-standard cone), the uniformity of the furnace temperature thermocouple or standard thermometer regularly check. Can be in 1.5h ~ 2h Within the furnace temperature rose to a lower than the estimated refractory resistance of the sample temperature of.200 ℃, and then the average 2.5 ℃/min uniform temperature, at any time with the provisions of The temperature deviation curve should be less than 10 ℃, until the end of the test. The furnace should maintain an oxidizing atmosphere. NOTE Some furnaces, such as those burned with certain hydrocarbons and oxygen, contain high levels of water vapor and reducing gas in the atmosphere, using high performance The refractory tube (plate) can be cone, the standard temperature cone, test cone and flame and gas. 4.2 camera system Used to observe the refractory test process, including optical lenses, video cameras, image processing systems. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 7322-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 7322-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 7322-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 7322-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 7322-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7322-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
