|
Std ID |
Description (Standard Title) |
|
GB/T 28221.1-2011
|
Basic public services for post-disaster transitional resettlement area -- Part 1: General
|
|
GB/T 28221.2-2011
|
Basic public services for post-disaster transitional resettlement area -- Part 2: Environment
|
|
GB/T 28221.3-2011
|
Basic public services for post-disaster transitional resettlement area -- Part 3: Safety
|
|
GB/T 28221.4-2012
|
Basic public services for post-disaster transitional resettlement area -- Part 4: Business
|
|
GB/T 28221.5-2011
|
Basic public services for post-disaster transitional resettlement area -- Part 5: Culture and sports
|
|
GB/T 28221.6-2011
|
Basic public services for post-disaster transitional resettlement area -- Part 6: Assistance and relief
|
|
GB/T 2822-1981
|
Standard linear dimensions
|
|
GB/T 2822-2005
|
Standard linear dimensions
|
|
GB/T 28222-2011
|
General principles for development of service standards
|
|
GB/T 28223-2011
|
Service of administration and relief shelters
|
|
GB/T 28224-2011
|
Service of relief and protection centre for minor vagrants
|
|
GB/T 28225-2011
|
Sampling and verifying method on the number of collapsed or damaged rural dwellings in natural disaster-affected areas
|
|
GB/T 28226-2011
|
Information exchange format on geographical names
|
|
GB/T 28227.1-2011
|
Guidelines for the implementation of quality management system of cultural service -- Part 1: General
|
|
GB/T 28227.2-2011
|
Guidelines for the implementation of the quality management system of cultural service -- Part 2: Indoor museum
|
|
GB/T 28227.3-2011
|
Guidelines for the implementation of the quality management system of cultural service -- Part 3: Open air museum
|
|
GB/T 28227.4-2011
|
Guidelines for the implementation of the quality management system of cultural service -- Part 4: Sales and leasing of audio-video products
|
|
GB/T 28227.5-2011
|
Guidelines for the implementation of the quality management system of cultural service -- Part 5: Audio-video products and electronic publications reproductions
|
|
GB/T 28227.6-2011
|
Guidelines for the implementation of quality management system of cultural service -- Part 6: Cinema
|
|
GB/T 28227.7-2011
|
Guidelines for the implementation of quality management system of cultural service -- Part 7: Theatre
|
|
GB/T 28228-2011
|
Detection of Listeria monocytogenes in ballast water of entry-exit ships
|
|
GB/T 28229-2011
|
Detection of diarrheagenic Escherichia coli in ballast water of entry-exit ships
|
|
GB/T 28230-2011
|
Enumeration of coliforms in ballast water of entry-exit ships by membrane filtration
|
|
GB/T 28236-2011
|
Method of chromosome aberration analysis for biological dose assessment
|
|
GB/T 28237-2011
|
Inspection specification for artistic gymnastic podium of installing
|
|
GB/T 28238-2011
|
Requirements for after-sale services of sporting goods
|
|
GB/T 28246-2012
|
Top gas pressure recovery turbine expander
|
|
GB/T 28247-2012
|
Rotary gear milling cutters
|
|
GB/T 28248-2012
|
Cemented carbide drills for printed boards
|
|
GB/T 28249-2012
|
The types and dimensions of timing belt wheel hobs
|
|
GB/T 28250-2012
|
The types and dimensions of timing belt mold hobs
|
|
GB/T 28251-2012
|
The technical specifications for timing belt wheel hobs and timing belt mold hobs
|
|
GB/T 28252-2012
|
Hobs for pre-grinding gear
|
|
GB/T 28253-2012
|
Thread forming tap
|
|
GB/T 28254-2012
|
Spiral pointed taps
|
|
GB/T 28255-2012
|
Taps with the hollow interior to deposit the swarf
|
|
GB/T 28256-2012
|
Trapezoidal taps
|
|
GB/T 28257-2012
|
Long shank nut taps
|
|
GB/T 28258-2012
|
Classification and codes for pharmaceutical machinery products
|
|
GB/T 28259-2012
|
Petroleum and natural gas industries -- Downhole equipment -- Subsurface safety valve equipment
|
|
GB/T 2826-1981
|
Tie-plates--Technical requirements for 38kg/m to 50kg/m steel rails
|
|
GB/T 28262-2012
|
Special testing equipment of explosive and medicament
|
|
GB/T 28264-2012
|
Lifting appliances -- Managing system of safety monitoring
|
|
GB/T 28266-2012
|
Non-destructive testing of pressure equipment -- Qualification of radiographic film digitization system
|
|
GB/T 28267.1-2012
|
Steel cord conveyor belts -- Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
|
|
GB/T 28267.2-2015
|
Steel cord conveyor belts -- Part 2: Preferred belt types
|
|
GB/T 10415-2007
|
Agricultural machinery -- Endless hexagonal belts and groove sections of corresponding pulleys
|
|
GB/T 10416-1989
|
Agricultural machinary half wide V-belt pulleys
|
|
GB/T 28268-2012
|
Rolling bearings -- Specifications of pressed cages
|
|
GB/T 28269-2012
|
Zigzag spring for seat -- Technical specifications
|
|
GB/T 28270-2012
|
Intelligent valve electric actuator
|
|
GB/T 28271-2012
|
Metric screw threads with extra fine pitch -- Tolerances
|
|
GB/T 28272-2012
|
Metric screw threads with extra fine pitch -- Series and basic dimensions
|
|
GB/T 28273-2012
|
Process classification of tube and sheet hydroforming
|
|
GB/T 28274-2012
|
Silicon-based MEMS fabrication technology -- The basic regulation of layout design
|
|
GB/T 28275-2012
|
Silicon-based MEMS fabrication technology -- Specification for KOH etch process
|
|
GB/T 28276-2012
|
Silicon-based MEMS fabrication technology -- Specification for dissolved wafer process
|
|
GB/T 28277-2012
|
Silicon-based MEMS fabrication technology -- Measurement method of cutting and pull-press strength of micro bonding area
|
|
GB/T 28278.1-2012
|
Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
|
|
GB/T 28278.2-2012
|
Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves
|
|
GB/T 28279.1-2012
|
Plain bearing -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
|
|
GB/T 28279.2-2012
|
Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings with drainage grooves
|
|
GB/T 2828.10-2010
|
Sampling procedures for inspection by attributes -- Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
|
|
GB/T 2828.11-2008
|
Sampling procedures for inspection by attributes -- Part 11: Procedures for assessment of declared quality levels for small population
|
|
GB/T 2828.1-2003
|
Sampling procedures -- Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
|
|
GB/T 10416-2007
|
Agricultural machinery -- Endless variable-speed V-belts and groove sections of corresponding pulleys
|
|
GB/T 2828.2-2008
|
Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
|
|
GB/T 2828.3-2008
|
Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures
|
|
GB/T 2828.4-2008
|
Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels
|
|
GB/T 2828.5-2011
|
Sampling procedures for inspection by attributes -- Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
|
|
GB/T 28280-2012
|
Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities
|
|
GB/T 28281-2012
|
Plain bearings -- Quality characteristics -- Statistical process control (SPC)
|
|
GB/T 2828-1987
|
Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
|
|
GB/T 28282-2012
|
Specification for function of computer aided process planning system
|
|
GB/T 28284-2012
|
Index system and methods for assessment of water-saving society
|
|
GB/T 28285-2012
|
Terminology for oxygen system of airplane
|
|
GB/T 28287-2012
|
Foot protection -- Test method for footwear slip resistance
|
|
GB/T 28288-2012
|
Foot protection -- Toecaps and penetration-resistant inserts
|
|
GB/T 28289-2012
|
Test methods for composite performances of aluminium alloy thermal barrier profiles
|
|
GB/T 28290-2012
|
Methods for determination of surface chromium on electrolytic tinplate
|
|
GB/T 28291-2012
|
Methods for determination of surface oil on electrolytic tinplate
|
|
GB/T 2829-1987
|
Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of stability for productive process)
|
|
GB/T 2829-2002
|
Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
|
|
GB/T 28292-2012
|
The technical specification for recycling and utilization of Fe-bearing dusts and sludges in iron and steel industry
|
|
GB/T 28293-2012
|
Ground iron and steel slag
|
|
GB/T 28294-2012
|
Steel slag composite material
|
|
GB/T 28295-2012
|
General specification of superalloy tubes
|
|
GB/T 28296-2012
|
Pig iron containing nickel
|
|
GB/T 28297-2012
|
Thicker steel plates -- Method for automatic ultrasonic testing
|
|
GB/T 28298-2012
|
Coking heavy oil
|
|
GB/T 28299-2012
|
Hot-rolled flange plate for construction
|
|
GB/T 11069-2006
|
High purity germanium dioxide
|
|
GB/T 2830-1981
|
Rolled-up punched paper tape for data interchange--General requirements
|
|
GB/T 2831-1981
|
Surface form deviation of optical elements--Inspection methods
|
|
GB/T 2831-2009
|
Surface form deviation of optical elements
|
|
GB/T 283-1994
|
Rolling bearings--Cylindrical rolling bearings--Boundary dimensions
|
|
GB/T 283-2007
|
Rolling bearings -- Cylindrical roller bearings -- Boundary dimensions
|
|
GB/T 2832-1996
|
Test method for crushing strength of vitrified pipe
|
|
GB/T 2833-1996
|
Test method for cross-bending strength of vitrified pipe
|
|
GB/T 2834-1981
|
Test method for water absorption of vitrified clay pipe
|