GB/T 28289-2012 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28289-2012: Test methods for composite performances of aluminium alloy thermal barrier profiles
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28289-2012	599	Add to Cart	5 days	Test methods for composite performances of aluminium alloy thermal barrier profiles	Valid

Similar standards

GB/T 24523   GB/T 31930   GB/T 29459.1   GB/T 45597   GB/T 33820   GB/T 45169   

Basic data

Standard ID: GB/T 28289-2012 (GB/T28289-2012)
Description (Translated English): Test methods for composite performances of aluminium alloy thermal barrier profiles
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H22
Classification of International Standard: 77.150.10
Word Count Estimation: 26,249
Quoted Standard: GB/T 228-2002; GB/T 8170; GB/T 16491; GB/T 16825.1-2008
Adopted Standard: EN 14024-2004, NEQ; AAMA TIR A8-2008, NEQ
Regulation (derived from): National Standards Bulletin No. 9 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the aluminum thermal profiles longitudinal shear test, transverse tensile test, torsional performance test, load transverse tensile stress rupture test, thermal cycling test, the creep coefficient of determination tests and other c

GB/T 28289-2012: Test methods for composite performances of aluminium alloy thermal barrier profiles

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS77.150.10 H22 National Standards of People's Republic of China Insulated aluminum profiles composite performance test method Issued on. 2013-02-01 2012-05-11 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard rule according to GB/T 1.1-2009 given draft. The standard reference method using redrafted EN14024.2004 (E) "insulated metal profiles performance requirements and test trials", AAMA TIRA8-08 "building insulated aluminum profile structure Performance" preparation and EN14024.., AAMATIRA8-08 unanimous 2004 (E) The degree of non-equivalent. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Guangzhou Nonferrous Metal Research Institute, Fujian Nanping Aluminum Co., Ltd. Shenzhen high-grade equipment, Guangdong-Alcoa Group, Tylenol wind-Thailand (Suzhou) Co., Ltd. insulation materials. Participated in the drafting of this standard. Guangdong Feng Aluminum Co., Ltd. Foshan Hua Hao Aluminum Co., Ltd. Foshan City of New Aluminum Ltd., Foshan City, Jihua Aluminum Company, Eliasson Polyurethane (Shanghai) Co., Ltd., Guangdong Haomei Aluminum Co., Ltd. The main drafters of this standard. Zhan Hao, Lin Jie, Chen Guangming, Bao Jiang Hong, HUANG Ri Yong, Chen Hui, blue Ahn Yang-volt wire, Chenyuan Zhen, Zhang Xinhong, Jing Hai River. Insulated aluminum profiles composite performance test method

1 Scope

This standard specifies the insulated aluminum profiles longitudinal shear test, transverse tensile test, torsional test, high temperature lasting lateral load pull Tensile test, thermal cycle test, test performance test methods and other composite creep coefficient (A2) was measured. This standard applies to construction with insulated aluminum profiles complex performance tests. Other types of composite profiles can refer to this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 228-2002 metal materials at room temperature tensile test method GB/T 8170 represents rounding off rules and limit values \u200b\u200band judgment GB/T 16491 electronic universal testing machine Check tension and (or) pressure testing machine force measuring system. GB/T 16825.1-2008 static uniaxial testing machines - Part 1 Test and calibration Test Method 3 3.1 Longitudinal shear test 3.1.1 Test Equipment 3.1.1.1 Tester 3.1.1.1.1 testing machine shall comply with GB/T 16825.1-2008 the accuracy of Class 1 or better level. 3.1.1.1.2 tester maximum load of not less than 20kN. 3.1.1.1.3 be equipped with high and low temperature environmental chambers, testing machine space is not less than 500mm × 1200mm appropriate. NOTE. Test elastic coefficient (C1), the tester should be used in line with GB/T 16491 requirements. 3.1.1.2 High and low temperature environmental chambers basic requirements refer to the provisions of Appendix A. 3.1.2 Sample 3.1.2.1 specimens shall conform cut the profile corresponding product standards should retain their original surface and remove the burr on the sample after processing. 3.1.2.2 cut the sample should be the prevention of thermal processing and affect performance test results of the sample. 3.1.2.3 sample form and position tolerances shall comply with the requirements of Figure 1. 3.1.2.4 Sample size is 100mm ± 2mm, with a resolution no greater than 0.02mm vernier caliper, in insulation materials and aluminum complex Closing parts of the measurement, each sample measurements two positions, calculate the average. 3.1.2.5 sample according to the corresponding provisions in product standards group and number. 3.1.3 Sample conditioning 3.1.3.1 before performance test, the samples shall state regulation. 3.1.3.2 insulated aluminum profiles specimens shall be at a temperature of 23 ℃ ± 2 ℃, relative humidity of 50% ± 10% of the environmental conditions placed 48h. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28289-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28289-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28289-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28289-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.