|
Std ID |
Description (Standard Title) |
|
GB/T 2520-2008
|
Cold-reduced electrolytic tinplate
|
|
GB/T 27691-2017
|
Wire rod for steel cord
|
|
GB/T 28267.3-2015
|
Steel cord conveyor belts -- Part 3: Special safety requirements for belts for use in underground installations
|
|
GB/T 28267.4-2015
|
Steel cord conveyor belts -- Part 4: Vulcanized belt joints
|
|
GB/T 29459.1-2012
|
Small punch test methods of metallic materials for in-service pressure equipment - Part 1: General requirements
|
|
GB/T 29459.2-2012
|
Small punch test methods of metallic materials for in-service pressure equipment - Part 2: Method of test for tensile properties at room temperature
|
|
GB/T 2970-2016
|
Method for ultrasonic testing of thicker steel plates
|
|
GB/T 2972-2016
|
Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
|
|
GB/T 2975-1998
|
Steel and steel products - Location and preparation of test pieces for mechanical testing
|
|
GB/T 3077-1999
|
Alloy structure steels
|
|
GB/T 3077-2015
|
Alloy structure steels
|
|
GB/T 3078-2008
|
Quality structural steel cold drawn bars
|
|
GB/T 308.1-2013
|
Rolling bearings -- Balls -- Part 1: Steel balls
|
|
GB/T 3089-2008
|
Thinnest-wall seamless tubes of stainless steel
|
|
GB/T 3091-2008
|
Welded steel pipes for low pressure liquid delivery
|
|
GB/T 3091-2015
|
Welded steel pipes for low pressure liquid delivery
|
|
GB/T 3094-2012
|
Cold drawn shaped steel tubes
|
|
GB/T 3098.15-2014
|
Mechanical properties of fasteners Nuts made of stainless-steel
|
|
GB/T 31315-2014
|
Cold drawn or cold rolled precision weld steel tubes for mechanical structures
|
|
GB/T 31554-2015
|
Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method
|
|
GB/T 31566-2015
|
Metallic coatings -- Physical vapour-deposited coatings of aluminium -- Specification and test methods
|
|
GB/T 31586.1-2015
|
Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing
|
|
GB/T 31586.2-2015
|
Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cress-cut testing and X-cut testing
|
|
GB/T 3190-2008
|
Wrought aluminium and aluminium alloy -- Chemical composition
|
|
GB/T 3191-2010
|
Aluminium and aluminium alloys extruded bars, rods
|
|
GB/T 31922-2015
|
Hot-rolled steel sheets and strips of higher yield strength with improved formability
|
|
GB/T 31925-2015
|
Ultrasonic test methods of heavy wall thickness seamless steel pipes and tubes
|
|
GB/T 31927-2015
|
Zinc and aluminum based coatings on steel sheets and strips -- Determination of lead and cadmium contents -- Inductively coupled plasma mass spectrometric method
|
|
GB/T 31930-2015
|
Metallic materials -- Ductility testing -- Compression test for porous and cellular metals
|
|
GB/T 31931-2015
|
Zinc or zinc alloy coating on steel sheets or strips -- Determination of hexavalent chromium content. 1, 5-Diphenylcarbohydrazide (diphenylcarbazide) spectrophotometric method
|
|
GB/T 31932-2015
|
Method for electromagnetic automatic ultrasonic testing for thicker steel plates
|
|
GB/T 31935-2015
|
Corrosion of metals and alloys -- Corrosion test for intergranular corrosion susceptibility of low-Cr ferritic stainless steels
|
|
GB/T 31936-2015
|
Rolls for welding steel pipe
|
|
GB/T 3195-2016
|
Aluminium and aluminium alloys drawn round wires
|
|
GB/T 31976-2015
|
Aluminium alloy sheets used for sound-absorbing composite panel with through-hole
|
|
GB/T 31979-2015
|
Steel wire ropes -- Determination of rotational properties
|
|
GB/T 3203-2016
|
Carburizing steels for bearing
|
|
GB/T 32095.1-2015
|
Performance and test methods of non-stick surface of domestic metal cooking utensils for household food -- Part 1: General requirement of performance
|
|
GB/T 32095.2-2015
|
Performance and test methods of non-stick surface of domestic metal cooking utensils for household food -- Part 2: Test specification of non-stick performance and abrasion resistance
|
|
GB/T 32095.3-2015
|
Performance and test methods of non-stick surface of domestic metal utensils for household food -- Part 3: Test specification of corrosion resistance
|
|
GB/T 32095.4-2015
|
Performance and test methods of non-stick surface of domestic metal cooking utensils -- Part 4: Test specification of simulative test and evaluation methods
|
|
GB/T 32184-2015
|
Extruded aluminum alloy flat bars and plates with high conductivity
|
|
GB/T 32185-2015
|
Titanium alloy large-sized bars
|
|
GB/T 32255-2015
|
General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service
|
|
GB/T 32258-2015
|
Steel cross wedge rolling -- General specification
|
|
GB/T 32260.1-2015
|
Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 1: General
|
|
GB/T 32285-2015
|
Hot-rolled steel H piles
|
|
GB/T 32289-2015
|
Quality carbon structure steels and alloy structure steels for large forgings
|
|
GB/T 32388-2015
|
Aluminum and aluminum alloys nonstick cookware
|
|
GB/T 32569-2016
|
Welded stainless steel tubes for seawater desalination plants
|
|
GB/T 32570-2016
|
Steel plates and strips for freight containers
|
|
GB/T 3274-2007
|
Hot-rolled plates and strips of carbon structural steels and high strength low alloy structural steels
|
|
GB/T 3274-2017
|
Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
|
|
GB/T 32790-2016
|
Methods for evaluating the weld quality of seam welds in aluminium and aluminium alloy extrusion
|
|
GB/T 32792-2016
|
Packing, marking, transporting and storing of magnesium alloy wrought products
|
|
GB/T 3280-2007
|
Cold rolled stainless steel plate, sheet and strip
|
|
GB/T 32957-2016
|
Cold-drawn or cold-rolled precision inside diameter seamless steel tubes for hydraulic and pneumatic system service
|
|
GB/T 32959-2016
|
High-carbon chromium bearing steel for large forged bars
|
|
GB/T 32968-2016
|
Zinc-aluminum alloy coated steel bars for the reinforcement of concrete
|
|
GB/T 32970-2016
|
Longitudinal submerged-arc welded steel pipe for high pressure service at high temperatures
|
|
GB/T 32977-2016
|
Hot rolled improved corrosion resisting steel sections
|
|
GB/T 33160-2016
|
Gear steel for wind power generation
|
|
GB/T 33162-2016
|
Continuously hot-rolled steel sheet and strip for cold-forming steel sections
|
|
GB/T 33165-2016
|
Quantitative analysis method of centre segregation for high carbon wire rod
|
|
GB/T 33167-2016
|
Seamless stainless steel tubes and pipes for industrial furnace of petroleum and chemical hydrogenation unit
|
|
GB/T 33811-2017
|
Alloy tool and mould steel sheets and plates
|
|
GB/T 33824-2017
|
Aluminum and aluminum alloys plates, sheets and strips for cans and caps of new energy power batteries
|
|
GB/T 3524-2015
|
Hot-rolled carbon and low alloy structural steel strips
|
|
GB/T 3639-2009
|
Seamless cold-drawn or cold-rolled steel tubes for precision applications
|
|
GB/T 3683-2011
|
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification
|
|
GB/T 3880.1-2012
|
Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering -- Part 1: Technical conditions of delivery
|
|
GB/T 3880.2-2012
|
Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering -- Part 2: Mechanical properties
|
|
GB/T 3880.3-2012
|
Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering -- Part 3: Tolerances on forms and dimensions
|
|
GB/T 3903.19-2008
|
Footwear -- Test methods for accessories: Metallic accessories -- Corrosion resistance
|
|
GB/T 4103.14-2009
|
Methods for chemical analysis of lead and lead alloys -- Part 14: Determination of cadmium content -- Flame atomic absorption spectrophotometry
|
|
GB/T 4162-2008
|
Forged and rolled steel bars -- Method for ultrasonic testing
|
|
GB/T 4171-2008
|
Atmospheric corrosion resisting structural steel
|
|
GB/T 4226-2009
|
Cold finished stainless steel bar
|
|
GB/T 4237-2015
|
Hot rolled stainless steel plate, sheet and strip
|
|
GB/T 4238-2015
|
Heat-resisting steel plate, sheet and strip
|
|
GB/T 4240-1993
|
Stainless steel wires
|
|
GB/T 4240-2009
|
Stainless steel wires
|
|
GB/T 4336-2016
|
[Including 2017XG] Carbon and low-alloy steel -- Determination of multi-element contents -- Spark discharge atomic emission spectrometric method (routine method)
|
|
GB/T 4354-2008
|
Hot rolled quality carbon steel wire rods
|
|
GB/T 4357-2009
|
Cold-drawn non-alloy steel wire for springs
|
|
GB/T 4423-2007
|
Copper and copper-alloy cold-drawn rod and bar
|
|
GB/T 5009.116-2003
|
Determination of oxytetracyline, tetracyline and chlortetracycline residues in meat (HPLC)
|
|
GB/T 5009.81-2003
|
Method for Analysis of Hygienic Standard of Stainless Steel Food Containers and Table Wares
|
|
GB/T 50938-2013
|
Technical code for low temperature steel storage tanks in petrochemical engineering
|
|
GB/T 5213-2008
|
[Replaced by GB/T 5213-2019] Cold rolled low carbon steel sheet and strip
|
|
GB/T 5216-2004
|
Structural steels subject to end-quench hardenability requirements
|
|
GB/T 5231-2012
|
Designation and chemical composition of wrought copper and copper alloys
|
|
GB/T 5270-2005
|
Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion
|
|
GB/T 5312-2009
|
Carbon and carbon-manganese steel seamless steel tubes and pipes for ship
|
|
GB/T 5313-2010
|
Steel plate with through-thickness characteristics
|
|
GB/T 5585.1-2005
|
Copper or aluminium and its alloy bus bars for electrical purposes -- Part 1: Copper and copper alloy bus bars
|
|
GB/T 5613-2014
|
Designation for cast steels
|
|
GB/T 5680-2010
|
Austenitic manganese steel castings
|
|
GB/T 5777-2008
|
Seamless steel pipe and tubing methods for ultrasonic testing
|
|
GB/T 586-2015
|
Marine cast steel flanged check valves
|