GB/T 38312-2019 English PDFUS$1159.00 ยท In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38312-2019: Code for mooring and sea trials of large yachts Status: Valid
Basic dataStandard ID: GB/T 38312-2019 (GB/T38312-2019)Description (Translated English): Code for mooring and sea trials of large yachts Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U18 Classification of International Standard: 47.020 Word Count Estimation: 58,547 Date of Issue: 2019-12-10 Date of Implementation: 2020-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38312-2019: Code for mooring and sea trials of large yachts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Regulations for mooring and sailing tests of large yachts) ICS 47.020 U18 National Standards of People's Republic of China Regulations for mooring and sailing tests of large yachts 2019-12-10 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Management Committee ContentsForeword III 1 Scope 1 2 Normative references 1 3 General requirements 1 4 Mooring test 2 4.1 Anchor equipment and windlass 2 4.2 Rudder gear and steering gear 2 4.3 Life-saving equipment 3 4.4 Tethering device 3 4.5 Doors, windows, hatch covers and other opening closing devices 3 4.6 Signal equipment 4 4.7 Fire suppression system 4 4.8 Fire detection and fire alarm system 5 4.9 Bilge water system and oil sewage oil filtering equipment5 4.10 Living and drainage systems 5 4.11 Ventilation system 6 4.12 Air-conditioning system 6 4.13 Air quality in the cabin 7 4.14 Fin stabilizers, wave pressure plates, boarding stairs 7 4.15 Main propulsion system 7 4.16 Diesel generator sets and distribution boards 8 4.17 Electric propulsion system, side thruster, stabilizer gyro 10 4.18 Charge and discharge board and battery pack 10 4.19 Main and emergency lighting 11 4.20 Radio communication equipment 11 4.21 Navigational equipment 12 4.22 Test Contents and Procedures of Alarm System 14 4.23 Ship-wide information system 14 5 Sailing test 14 5.1 Ship performance test 14 5.2 Anchor Test 17 5.3 Main propulsion system test 17 5.4 Operation test of diesel generator set 20 5.5 Alarm System 20 5.6 Radio communication equipment 20 5.7 Navigational equipment 21 5.8 Hull vibration test 22 5.9 Ship noise test 22 5.10 Fin stabilizers, pressure wave stabilizers, gyroscopic stabilizers 23 Appendix A (Informative) Test Record Form 24ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed and managed by the National Marine Ship Standardization Technical Committee (SAC/TC12). This standard was drafted. China Classification Society Shanghai Branch, Zhuhai Sunbird Yacht Manufacturing Co., Ltd., China Shipbuilding Industry Corporation 704 Research Institute, Tianhai Fusion Defense Equipment Technology Co., Ltd. The main drafters of this standard. Fu Qichao, Hu Dairong, Solemn, Lu Xiangdong, Chen Hansong, and Stretch. Regulations for mooring and sailing tests of large yachts1 ScopeThis standard specifies the general requirements for mooring and sailing tests of large yachts, the test items for mooring and sailing tests, and their test strips. Documents, test content and procedures, test records and reports. This standard applies to the relevant tests of large yachts.2 Normative referencesThe following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 3221 Mooring and Navigation Test Outline for Diesel-Powered Inland Waterway Ships GB/T 3471 General rules for sea-boat mooring and navigational tests3 General requirements3.1 Before the mooring test of each newly built yacht, the design unit or shipyard shall compile the ship in consultation with relevant units according to the provisions of this standard The test items and specific test outlines to be carried out shall be submitted to the shipowner for confirmation and the ship survey agency for approval. 3.2 Prior to the mooring test, the hull construction, equipment, devices and systems shall be constructed, installed and commissioned in accordance with the requirements of the drawings and technical documents. carry out. 3.3 The test results of each project shall meet the requirements of applicable regulations, rules, conventions, codes or standards. 3.4 The test equipment and instruments used for mooring test and navigation test should be signed by the relevant national authority or an approved testing agency. Issued a valid certificate of conformity or test report. For testing equipment and instruments related to statutory and classification inspections, the units that perform the inspections are The right to check its accuracy level, periodic documents or records. 3.5 If the marine products installed on board are in the list of certificates and regulations, they should hold the marine product certificate issued by the ship inspection agency. Book, certificate of approval. Lifting equipment (such as stern doors, booms, etc.) and dinghy rigs have clear test requirements in relevant regulations.This standard No longer explained. 3.6 Prior to the sailing test, the tilt test shall be completed in accordance with the technical documents approved by the ship inspection agency, and the test report shall be approved by the ship inspection agency. Quasi-recognition. For sister ships, the calculation of the center of gravity for empty ships should be approved by the ship survey agency. Completion stability meter to enter the results of the tilt test The calculation should be approved by the ship survey agency. 3.7 Prior to the sailing test, the mooring test of the whole boat shall be completed and the test results shall be satisfactory. The faults and defects found in the mooring test shall be eliminated, and Obtain a sea trial certificate issued by a ship inspection agency. 3.8 Shipyards shall make various test records during mooring and navigation tests. After the test, the shipyard shall sort out the relevant technical documents And test report, and submitted as necessary technical documents for survey and delivery to the ship inspection agency and ship-using unit. 3.9 The mooring test is to check the construction and installation quality of the hull, device, electromechanical equipment and related systems of the yacht and its static conditions. Work conditions, determine initially whether the expected performance can be achieved, and then determine whether the conditions for sailing tests are met. 3.10 The sailing test is a test of the marine performance, mechanical equipment and electrical equipment of the yacht to verify the overall performance and equipment of the yacht. In accordance with legal and regulatory requirements, determine that all projects meet the design goals. Before the sailing test, the main and auxiliary aircraft and auxiliary equipment, and the bilge Water system, anchor equipment, rudder equipment, life-saving equipment, fire-fighting equipment, navigation equipment, signal equipment, communication equipment, watertight devices, tilt test ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38312-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 38312-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38312-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38312-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
