GB/T 36213-2018 English PDF

US$244.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 36213-2018: Ships and marine technology -- Ship mooring and towing fittings -- Mooring chocks
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 36213-2018	244	Add to Cart	3 days	Ships and marine technology -- Ship mooring and towing fittings -- Mooring chocks	Valid

Similar standards

GB/T 36217   GB/T 36217   

Basic data

Standard ID: GB/T 36213-2018 (GB/T36213-2018)
Description (Translated English): Ships and marine technology -- Ship mooring and towing fittings -- Mooring chocks
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U21
Classification of International Standard: 47.020.50
Word Count Estimation: 13,196
Date of Issue: 2018-05-14
Date of Implementation: 2018-12-01
Regulation (derived from): National Standards Announcement No. 6 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 36213-2018: Ships and marine technology -- Ship mooring and towing fittings -- Mooring chocks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Ships and Offshore Technologies Ship Mooring and Towing Equipment Mooring fairleads) ICS 47.020.50 U21 National Standards of People's Republic of China Ship and offshore technology ship mooring and towing equipment Mooring cable guide Mooringchocks (ISO 13713.2012, IDT) Published on.2018-05-14 2018-12-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 13713.2012 "Boat and marine technology ship mooring and towing equipment mooring guide Cable hole. This standard has made the following editorial changes. --- Added the informative Appendix NA to explain the mark. This standard is proposed and managed by the National Ship Armor Standardization Technical Committee (SAC/TC129). This standard was drafted. China Shipbuilding Industry Comprehensive Technology and Economic Research Institute. The main drafters of this standard. Zhang Meiling, Wei Wei, Yuan Xin. Ship and offshore technology ship mooring and towing equipment Mooring cable guide

1 Scope

This standard specifies the design, dimensions and technical requirements for mooring guide holes for guiding mooring and towing cables.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. IMOCircularMSC/Circ.1175 Boat Towing and Mooring Equipment Guide (Guidanceonshipboardtowingand Mooringequipment)

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Safe working load safeworkingload; SWL The maximum load the cable can withstand under normal operating conditions, in kilohertz (kN).

4 classification

4.1 type The mooring cable holes can be divided into the following two types according to the installation position. ---A type. deck mounted mooring cable hole; ---B type. berth mounted mooring cable hole. 4.2 Nominal size The nominal size of the mooring cable guide is expressed in terms of the width and height (L x H) of the opening of the cable guide in millimeters. For the same nominal Mooring cable holes of different sizes and safe working loads are marked with letters after the nominal size. The nominal size of the mooring guide hole specified in this standard is. 250×200, 300×250, 350×250, 400×250, 450×250, 500×250A, 500×250B

5 size

The structure and dimensions of the mooring guide holes and the safe working load are as shown in Figure 1, Table 1, Figure 2 and Table 2.

6 materials

The mooring guide hole shall be made of cast steel or equivalent material with a yield strength of not less than 235 N/mm2. Casting steel considering solderability ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 36213-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 36213-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 36213-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 36213-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.