|
Std ID |
Description (Standard Title) |
|
GB/T 16835-1997
|
Code of normal and short-cycle speciality
|
|
GB/T 16839.1-1997
|
Thermocouples. Part 1: Reference tables
|
|
GB/T 16839.2-1997
|
Thermocouples. Part 2: Tolerances
|
|
GB/T 16840.1-2008
|
Technical determination method for electrical fire evidence -- Part 1: Macroscopic method
|
|
GB/T 16840.5-2012
|
Technical determination methods for electrical fire evidence -- Part 5: Method of recognizing and collecting the physical evidence of electrical fire
|
|
GB/T 16840.6-2012
|
Technical determination methods for electrical fire evidence -- Part 6: Micro-morphological analysis method using scanning electron microscope
|
|
GB/T 16841-1997
|
Guide for dosimetry in an electron beam facility for radiation processing at energies between 300keV and 25MeV
|
|
GB/T 16841-2008
|
Guide for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
|
|
GB/T 1684-1985
|
Vulcanized rubber--Testing short time static compression
|
|
GB/T 16842-1997
|
Test probes to verify protection by enclosures
|
|
GB/T 16842-2008
|
Protection of persons and equipment by enclosures -- Probe for verification
|
|
GB/T 16842-2016
|
Protection of persons and equipment by enclosures -- Probe for verification
|
|
GB/T 16845.1-1997
|
Dust collector--Terminology. Part 1: Common ones
|
|
GB/T 16845.2-1997
|
Dust collector--Terminology--Part 2: Inertial dust collector, porous layer dust collector and wet scrubber
|
|
GB/T 16845.3-1997
|
Dust collector--Terminology. Part 3: Electrostatic precipitators
|
|
GB/T 16845-2008
|
Dust collector -- Terminology
|
|
GB/T 16846-2008
|
Requirement for the declaration of the acoustic output of medical diagnostic ultrasonic equipment
|
|
GB/T 16848-1997
|
Accuracy of double enveloping worm gearing with straight line generatrix
|
|
GB/T 16849-1997
|
Generic specification on optical fibre amplifiers
|
|
GB/T 16849-2008
|
Generic specification of optical fiber amplifier
|
|
GB/T 16850.1-1997
|
Basic specification for optical fibre amplifier test methods. Part 1: Test methods for gain parameters
|
|
GB/T 16850.2-1999
|
Basic specification for optical fibre amplifier test methods. Part 2: Test methods for power parameters
|
|
GB/T 16850.3-1999
|
Basic specification for optical fibre amplifier test methods. Part 3: Test methods for noise figure parameters
|
|
GB/T 16850.4-2006
|
Basic specification for optical fibre amplifier test methods -- Part 4: Test methods for analogue parameters -- Gain slope
|
|
GB/T 16850.5-2001
|
Basic specification for optical fibre amplifier test methods -- Part 5 Test methods for reflectance parameters
|
|
GB/T 16850.6-2001
|
Basic specification for optical fibre amplifier test methods -- Part 6: Test methods for pump leakage parameters
|
|
GB/T 16850.7-2001
|
Basic specification for optical fibre amplifier test methods -- Part 7: Test methods for out-of-hand insertion losses
|
|
GB/T 16851-1997
|
Sound systems for emergency purposes
|
|
GB/T 1685-1982
|
Rubber vulcanized--Determination of stress relaxation in compression at normal and elevated temperature
|
|
GB/T 1685-2008
|
Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression at ambient and at elevated temperatures
|
|
GB/T 16854.1-1997
|
Rules of drafting and presentation of diagnostic criteria of occupational disease--Part 1: General guideline for drafting diagnostic criteria of occupational disease
|
|
GB/T 16854.2-1997
|
Rule of drafting and presentation of diagnostic criteria of occupational disease--Part 2: Terms of diagnosis of occupational disease
|
|
GB/T 16855.100-2005
|
Safety for machinery -- Safety-related parts of control systems -- Part 100: Guidelines for the use and application of GB/T 16855.1
|
|
GB/T 16855.1-1997
|
Safety of machinery--Safety related parts of control systems--Part 1: General principles for design
|
|
GB/T 16855.1-2005
|
Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
|
|
GB/T 16855.1-2008
|
Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
|
|
GB/T 16855.2-2007
|
Safety of machinery -- Safety-related parts of control systems -- Part 2: Validation
|
|
GB/T 16855.2-2015
|
Safety of machinery -- Safety-related parts of control systems -- Part 2: Validation
|
|
GB/T 16856.1-2008
|
Safety of machinery -- Risk assessment -- Part 1: Principles
|
|
GB/T 16856.2-2008
|
Safety of machinery -- Risk assessment -- Part 2: Practical guidance and examples of methods
|
|
GB/T 16856-1997
|
Safety of machinery--Principles for risk assessment
|
|
GB/T 16856-2015
|
Safety of machinery -- Risk assessment -- Practical guidance and examples of methods
|
|
GB/T 16857.1-2002
|
Geometrical product specification (GPS) -- Acceptance and reverification tests for coordinate measuring machines -- Part 1: Vocabulary
|
|
GB/T 16857.2-1997
|
Coordinate metrology. Part 2: Performance assessment of coordinate measuring machines
|
|
GB/T 16857.2-2006
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size
|
|
GB/T 16857.3-2009
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMMs with the axis of a rotary table as the fourth axis
|
|
GB/T 16857.4-2003
|
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode
|
|
GB/T 16857.5-2004
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems
|
|
GB/T 16857.6-2006
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
|
|
GB/T 16858-1997
|
A far end camera control protocol for videoconferences using data link protocol
|
|
GB/T 16859-1997
|
Terminal marking for valve device stacks and assemblies and for power convertor equipment
|
|
GB/T 16860-1997
|
Sensory analysis methodology. Texture profile
|
|
GB/T 16861-1997
|
Sensory analysis. Identification and selection of descriptors for establishing a sensory profile by a multidimensional approach
|
|
GB/T 16862-1997
|
Table grape--Guide to cold storage
|
|
GB/T 16862-2008
|
Cold storage for table grapes
|
|
GB/T 16863-1997
|
Method for testing refractive index of crystals
|
|
GB/T 16864-1997
|
Method for testing cryogenic transmissivity of crystals
|
|
GB/T 16865-1997
|
Test pieces for tensile test for wrought aluminum and magnesium alloy products
|
|
GB/T 16865-2013
|
Test pieces and method for tensile test for wrought aluminium and magnesium alloys products
|
|
GB/T 16866-1997
|
Wrought copper and copper alloy seamless round tubes for general purposes--Dimensions and tolerances
|
|
GB/T 16866-2006
|
Dimensions and tolerances of copper and copper alloy seamless tubes
|
|
GB/T 16867-1997
|
Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography
|
|
GB/T 16868-1997
|
Commodity quality management specification
|
|
GB/T 16868-2009
|
Commodity and service quality management specification
|
|
GB/T 16869-1997
|
Fresh (or frozen) chicken cuts
|
|
GB/T 1687.1-2016
|
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 1: Basic principles
|
|
GB/T 1687.3-2016
|
Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexo meter testing -- Part 3: Compression flexo meter (constant-strain type)
|
|
GB/T 16870-1997
|
Asparagus cold storage tachnique
|
|
GB/T 16870-2009
|
Asparagus -- Guide to storage
|
|
GB/T 16871-1997
|
Mullet standard for parent fish and fingerling
|
|
GB/T 16871-2008
|
Redlip mullet standard for parent fish and fingerling
|
|
GB/T 1687-1993
|
Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Part 2: Compression flexometer
|
|
GB/T 16872-1997
|
Seedling of farrerscallop
|
|
GB/T 16872-2008
|
Farrer scallop -- Seedling
|
|
GB/T 16873-1997
|
Scattered mirror carp
|
|
GB/T 16874-1997
|
Fangzheng crucian carp
|
|
GB/T 16875-1997
|
The red carp of Xingguo
|
|
GB/T 16876-1997
|
Test methods for interspace vacuum of liquid nitrogen containers
|
|
GB/T 16877-1997
|
Prohibition and scrapping for tractors
|
|
GB/T 16877-2008
|
Prohibition and scrapping for tractors
|
|
GB/T 16878-1997
|
Specification for metrology pattern cells for integrated circuit manufacture
|
|
GB/T 16879-1997
|
Guidelines for precision and accuracy expression for mask writing equipment
|
|
GB/T 16880-1997
|
Guidelines for photomask defect classification and size definition
|
|
GB/T 16881-1997
|
Coagulation--Flocculation jar test of water
|
|
GB/T 16881-2008
|
Coagulation -- Deposition jar test of water
|
|
GB/T 1688-1986
|
Rubber, vulcanized--Determination of tension fatigue
|
|
GB/T 1688-2008
|
Rubber, vulcanized -- Determination of tension fatigue
|
|
GB/T 16886.10-2000
|
Biological evaluation of medical devices--Part 10: Tests for irritation and sensitization
|
|
GB/T 10110-1988
|
Grey kimono silk for export
|
|
GB/T 16886.11-1997
|
Biological evaluation of medical devices--Part 11: Tests for systemic toxicity
|
|
GB/T 16886.11-2011
|
Biological evaluation of medical devices -- Part 11: Tests for systemic toxicity
|
|
GB/T 16886.1-1997
|
Biological evaluation of medical devices--Part 1: Guidance on selection of tests
|
|
GB/T 16886.1-2001
|
Biological evaluation of medical devices -- Part 1: Evaluation and testing
|
|
GB/T 10111-1988
|
Methods for random sampling by utilizing dices of random number
|
|
GB/T 16886.12-2000
|
Biological evaluation of medical devices--Part 12: Sample preparation and reference materials
|
|
GB/T 10111-2008
|
Generation of random numbers and procedures applied to sampling inspection for product quality
|
|
GB/T 16886.13-2001
|
Biological evaluation of medical devices -- Part 13: Identification and quantification of degradation products from polymeric medical devices
|
|
GB/T 16886.14-2003
|
Biological evaluation of medical devices -- Part 14: Identification and quantification of degradation products from ceramics
|
|
GB/T 16886.15-2003
|
Biological evaluation of medical devices -- Part 15: Identification and quantification of degradation products from metals and alloys
|
|
GB/T 16886.16-2003
|
Biological evaluation of medical devices -- Part 16: Toxicokinetic study design for degradation products and leachable
|