HOME Cart(12) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJG 1065-2011 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1065-2011: Vertification regulation of IC card timing and charging device for water saving
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJG 1065-2011	English	329	Add to Cart	3 days [Need to translate]	Vertification regulation of IC card timing and charging device for water saving	Valid	JJG 1065-2011

PDF similar to JJG 1065-2011

Standard similar to JJG 1065-2011

GB/T 3222.1 JJF 1234 JJF 1396 JJF 1900 JJG 1074 JJG 1071

Basic data

Standard ID	JJG 1065-2011 (JJG1065-2011)
Description (Translated English)	Vertification regulation of IC card timing and charging device for water saving
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	A57
Classification of International Standard	17.080
Word Count Estimation	14,158
Date of Issue	2011-04-12
Date of Implementation	2011-07-12
Quoted Standard	JJF 1001-1998; JJF 1059-1999; CJ 164-2002; CJ/T 194-2004
Regulation (derived from)	AQSIQ Announcement No. 58 of 2011
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine
Summary	This standard applies to non-contact IC card is stored saving time billing cost carrier's initial verification, testing and use of follow-up inspection.

JJG 1065-2011: Vertification regulation of IC card timing and charging device for water saving

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vertification regulation of IC card timing and charging device for water saving State verification procedures People's Republic of China IC card meter water-saving timer Issued on. 2011-04-12 2011-07-12 implementation The State Administration of Quality Supervision, Inspection and Quarantine released IC card meter water-saving timer Verification Regulation forWaterSavin The regulations by the State Administration of Quality Supervision, Inspection and Quarantine on April 12, 2011 approved, and since From July 12, 2011 into effect. Focal point. the National Commission on Time and Frequency Measurement Technology Main drafting unit. Zhengzhou City of Quality and Technical Supervision and Testing Center Participated in the drafting unit. Hangzhou quality technical supervision detection hospital Zhengzhou City Water Saving Office Hangzhou King Electronics Co., Ltd. Zhengzhou new Cape Electronics Co., Ltd. The national time and frequency measurement procedures commissioned technical committee responsible for the interpretation The main drafters of this procedure. Zhu Jiang (Zhengzhou City of Quality and Technical Supervision and Testing Center) Ke Chun-rong (Zhengzhou City of Quality and Technical Supervision and Testing Center) Drafters participate. Jiang Xueping (Hangzhou Quality and Technical Supervision and Inspection Institute) Ren Changjiang (Zhengzhou City Water Saving Office) Wang recorded (Zhengzhou City Water Saving Office) Section XI (Hangzhou Jing Electronic Co., Ltd.) Fu Changshun (Zhengzhou new Cape Electronics Co., Ltd.)

1 Scope (1) 2. References (1) 3 Overview (1) 4 The term (1) 5 metering performance requirements (2) 5.1 Timing maximum permissible error (2) 5.2 storage chargeback rates and correctness (2) 5.3 Reading distance (2) 5.4 Infrared sensing distance (2) 5.5 Open Time (2) 5.6 off-time (2) 5.7 shower water flow (2) 6 General Requirements (3) 6.1 Appearance (3) 6.2 function (3) 7 control of measuring instruments (3) 7.1 test conditions (3) 7.2 Verification Project (4) 7.3 Verification Methods (4) 7.4 Verification Results Processing (7) 7.5 test cycle (7) Appendix A test certificate (in-page) format (8) Appendix B test results of notice (in-page) format (9) IC card water-saving timer meter verification procedures

1 Scope

The order applies to water-saving time billing is a non-contact IC card is stored in the initial verification of cost carrier, after Continued verification and in-service inspection. 2. References This procedure references the following documents. JJF1001-1998 common measurement terms and definitions JJF1059-1999 Evaluation and Expression of Uncertainty in Measurement CJ164-2002 water-saving domestic water appliances CJ/T 194-2004 Non-contact water appliances Should pay attention to the use of this procedure using the above referenced files currently valid version.

3 Overview

IC card water-saving time billing (hereinafter referred to as the timer) refers to the use of water in public bathrooms and other places to Non-contact IC card for the user to identify and stored cost carrier, measured in water-saving time charge as a means of control equipment. Timer from the card reader, timing, storage rates, the amount of deductions to calculate, display, and communication interface management system and other terms Components and electronic volume control valves and other water control components for the cardholder water metering time, and based on the count Results and calculate the amount of memory to charge rates and fees deducted from the user's card. Timer Press and use quadratic formula into slot swipe. Timers slot has a dedicated slot, insert IC card start time, time required to process the IC card has been placed in the slot, remove the card that is stop the clock, counting process The timer will be written into the IC card chargeback information in real time; Secondary swipe card first timer start time, time over Process IC card should be placed outside the effective reading distance, the second card stop the clock, and at the same time chargeback information write once Into the IC card. Timer starts way into the card (credit card) start, infrared, etc. to start. Wherein the card (credit card) start The basic timing for the timer start mode, the timer starts counting mode can be switched by setting the parameter card.

4 Terms

4.1 RF IC card radiofrequencyICcard IC card timer using non-contact IC card, also known as radio frequency card, the IC chip, antenna composed of sensors, And fully sealed in a PVC card, between the non-exposed parts, RF card and reader via radio frequency mode To complete the user identification and data exchange. 4.2 Parameter card parametercard Also known as the setup card, set the timer for recording parameters, including billing unit of time, rates, whether infrared enabled Wait. Managers use the card to set the parameters are downloaded to the timer, the timer is set according to the parameters work.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 1065-2011_English be delivered?

Answer: Upon your order, we will start to translate JJG 1065-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 1065-2011_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 1065-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.