|
US$1474.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30104.208-2013: Digital addressable lighting interface -- Part 208: Particular requirements for control gear -- Switching function (device type 7)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30104.208-2013 | English | 1474 |
Add to Cart
|
5 days [Need to translate]
|
Digital addressable lighting interface -- Part 208: Particular requirements for control gear -- Switching function (device type 7)
| Valid |
GB/T 30104.208-2013
|
PDF similar to GB/T 30104.208-2013
Basic data | Standard ID | GB/T 30104.208-2013 (GB/T30104.208-2013) | | Description (Translated English) | Digital addressable lighting interface -- Part 208: Particular requirements for control gear -- Switching function (device type 7) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.50; 29.140.99 | | Word Count Estimation | 74,768 | | Quoted Standard | GB/T 30104.101-2012; GB/T 30104.102-2013 | | Adopted Standard | IEC 62386-208-2009, IDT | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the protocol and test methods for controlling the electronic control unit by a digital signal, the output is "on/off. " | GB/T 30104.208-2013: Digital addressable lighting interface -- Part 208: Particular requirements for control gear -- Switching function (device type 7)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Digital addressable lighting interface Part 208. Particular requirements for control gear Switching function (device type 7)
ICS 29.140.50; 29.140.99
K74
National Standards of People's Republic of China
Digital addressable lighting interface - Part 208.
Particular requirements for the control device switching function
(Device type 7)
Part 208. Particularrequirementsforcontrolgear-Switchingfunction
(Devicetype7)
(IEC 62386-208.2009, IDT)
Issued on. 2013-12-17
2014-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅴ
Introduction Ⅵ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 General requirements
5 Electrical Specifications 2
6 Interface Power 2
7 Structure 2 Transport Protocol
8 Timing 2
9 Operating Method 2
10 variable declaration 4
11 directive defines 5
12 test procedure 9
Appendix A (informative) Example 66 Algorithm
References 67
Figure 1 illustrates the structure of a possible 4
Figure 2 Application Example 6 extended configuration instruction sequence
Figure 3 "query feature" Test Process 10
Figure 4 "reset state/Fixed Memory" Test Process 11
Figure 5 "query load error" testing process 13
Figure 6 "with the duration of the query load error" testing process 14
Figure 7 "with the uncertain duration of the query load error" testing process 16
Figure 8 "query control information" Test Process 17
Figure 9 "reference system power" Test Process 18
10 "reference system power. 100ms timeout" Test Process 19
11 "reference system power. intermediate instruction" Test Process 20
12 "reference system power. 15min timer" 21 testing process
13 "reference system power. failed" test process 22
Fig. 14 "Threshold. Configure sequence" Test Process 23
15 "error duration. Configuration Sequence" test sequence 25
Figure 16 "is stored in the threshold value in DTR X" testing process 27
Figure 17 "is stored in the minimum/maximum level at DTR" test process 29
Figure 18 "is stored in the DTR duration of error" test process 30
19 "Enable Device Type. application extended query command" Test Process 31
20 "Enable Device Type. Power Reference System" Test Process 32
21 "Enable Device Type. Other applications extended configuration command" Test Process 34
22 "Enable Device Type. Error duration of the" Test Process 36
23 "Enable Device Type. application extended configuration directives 2" Test Process 37
Figure 24 "on and off default" Test Process 38
25 "Default fade off" test process 40
Figure 26 "on and off the full range of" Test Process 41
Figure 27 "on and off the limited scope of the" Test Process 45
Figure 28 "virtual dimmer fade time" testing process 49
29 "virtual dimmer fade rate" Test Process 51
Figure 30 "on and off IAPC" Test Process 52
Figure 31 "on and off adjustable threshold" test process 54
32 "on and off an adjustable minimum/maximum" Test Process 56
Figure 33 "on and off default power level/system" testing process 58
Figure 34 "on and off the power" test process 60
Figure 35 "on and off system failure" Test Process 62
Figure 36 "Discover the extension version number" Test Process 64
37 "reserved for applications extended instruction" Test Process 65
Figure A.1 switching characteristics Example 66
Table 1 virtual arc power level (VAPL) 3
Table 2 variable declaration 4
Table 3 Application of Extended Instruction Set Summary 9
Table 4 "state/Fixed Memory" parameter testing process 12
Table 5 "with the duration of the query load error" Test Procedure 15
Table 6 "reference system power. intermediate instruction" Test Procedure 20
Table 7 "Threshold. Configure sequence" test parameters and step 124
Table 8 "Threshold. Configure sequence" test parameters and test step 224
Table 9 "Threshold. Configure sequence" test parameters and test step 324
Table 10 "error duration. Configuration Sequence" Test Procedure 26
Table 11 "is stored in the threshold value in DTR X" Test Procedure 28
Table 12 "DTR is stored in the minimum/maximum level" Test Procedure 29
Table 13 "is stored in the DTR error duration" Test Procedure 30
Table 14 "Enabling Device Type. application extended query command" Test Procedure 31
Table 15 "Enabling Device Type. Power Reference System" Test Procedure 33
Table 16, "Enabling Device Type. Other applications extended configuration command" test step 134
Table 17 "Enabling Device Type. Other applications extended configuration command" test step 235
Table 18 "Enabling Device Type. Other applications extended configuration command" test step 335
Table 19 "Enabling Device Type. Error duration of the" Test Procedure 36
Table 20 "Enabling Device Type. application extended configuration directives 2" test step 137
Table 21 "Enabling Device Type. application extended configuration directives 2" test step 238
Table 22, "Default on and off" Test Procedure 39
TABLE 23 "Default fade off" test step 140
TABLE 24 "Default fade off" test step 241
Table 25 "on and off the full range of" test procedures and parameters 142
Table 26 "on and off the full range of" test procedures and parameters 242
Table 27 "on and off the full range of" test procedures and parameters 342
Table 28 "on and off the full range of" test procedures and parameters 442
Table 29 "on and off the full range of" test procedures and parameters 543
Table 30 "on and off the limited scope" test procedures and parameters 146
Table 31 "on and off the limited scope" test procedures and parameters 246
Table 32 "on and off the limited scope" test procedures and parameters 346
Table 33 "on and off the limited scope" test procedures and parameters 447
Table 34 "on and off the limited scope" test procedures and parameters 547
Table 35 "virtual dimmer fade time" test procedures and parameters 150
Table 36 "virtual dimmer fade time" test procedures and parameters 250
Table 37 "virtual dimmer fade time" test procedures and parameters 350
Table 38 "virtual dimmer fade rate" Test Procedure 52
Table 39 "on and off IAPC" Test Procedure 53
Table 40 "on and off adjustable threshold" test procedures and parameters 155
Table 41 "on and off adjustable threshold" test procedures and parameters 255
Table 42 "on and off adjustable threshold" test procedures and parameters 355
Table 43 "on and off an adjustable minimum/maximum" test procedures and parameters 156
Table 44 "on and off an adjustable minimum/maximum" test procedures and parameters 257
Table 45 "on and off an adjustable minimum/maximum" test procedures and parameters 357
Table 46 "on and off default power level/system" test procedures and parameters 159
Table 47 "on and off default power level/system" test procedures and parameters 259
Table 48 "on a turn-on and turn-off power" test procedures and parameters 161
Table 49 "on a turn-on and turn-off power" test procedures and parameters 261
Table 50 "on and off system failure" test procedures and parameters 163
Table 51 "on and off system failure" test procedures and parameters 263
Table 52 "reserved for applications extended instruction" Test Procedure 65
Foreword
GB/T 30104 "Digital Addressable Lighting Interface" is divided into 13 parts.
--- Part 101. General requirements for systems;
--- Part 102. General requirements for the control device;
--- Part 103. General requirements for control equipment;
--- Part 201. control means special requirements for fluorescent lamps (device type 0);
--- Part 202. Particular requirements for control self-contained emergency lighting (device type 1);
--- Part 203. Particular requirements for control of discharge lamps (excluding fluorescent lamps) (device type 2);
--- Part 204. control means special requirements for low-voltage halogen lamps (device type 3);
--- Part 205. Particular requirements for control devices incandescent supply voltage controller (device type 4);
--- Part 206. Particular requirements for digital signal control device into a DC voltage (device type 5);
--- Part 207. control means special requirements of LED modules (device type 6);
--- Part 208. control means special requirements for the switching function (device type 7);
--- Part 209. control means special requirements for color control (device type 8);
--- Part 210. control program means a special device requirements (device type 9).
This section GB/T Part of 20,830,104.
This section drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20000.2-2009 given.
This section uses the translation method identical with IEC 62386-208.2009 "Digital addressable lighting interface - Part 208. control means
Particular requirements for the switch function (device type 7). "
This part is proposed by the China National Light Industry Council.
This part of the National Electric lighting Standardization Technical Committee (SAC/TC224) centralized.
Drafting this Part. Guangdong Product Quality Supervision and Inspection Institute, GUANGZHOU, Electrical Equipment Co., Ltd. Foshan City bright environment Tovey
Engineering Co., Ltd., Hangzhou for Optoelectronic Technology Co., Ltd., Shanghai Yaming Lighting Co., Ltd., Foshan City, China Electrical Lighting has
Limited, Guzhen Town, Zhongshan City Productivity Promotion Center, Guangdong KAILESI Optoelectronics Technology Co., Ltd., Dongguan City Arima Power Technology Co.,
Beijing Institute of electric light.
The main drafters of this section. LI Zi-li, Luowan Xia, Zhou Qiao instrument, Zhang 5296 Xu Xiaoliang, district Zhi Yang, Huang Zhitong, Ng Wing-lok, Suhao Lin,
Zhao Xiurong, Duan Yan Fang, Jiang Shan.
Introduction
This section will be published simultaneously with the GB/T 30104.101 and GB/T 30104.102. The GB/T 30104 is divided into several parts published separately
For future amendments and revisions. If necessary, add additional requirements.
When referring to GB/T 30104.101 or GB/T within 30104.102 any provisions of this section and the composition of GB/T 30104.2 ×× Department
Other parts of the column clearly defines the order in terms of scope and testing. If necessary, this section includes additional requirements. group
To GB/T 30104.2 ×× all parts of the series are independent, and therefore does not contain references to each other.
Requires that any provisions of GB/T 30104.101 or GB/T 30104.102 in this section to "in accordance with GB/T 30104.101 first
'N' chapter of the requirements, "a reference to the form of the sentence, the sentence could be interpreted as all requirements related to the provision of Section 101 or Section 102 are
But it does not apply to Part 208 except the control device contains a particular type of lamp.
Unless otherwise stated, figures in this section are used in the decimal. Hexadecimal numbers using 0xVV format, several of which VV
value. Binary digits or using XXXXXXXXb XXXXXXXX format, wherein X is 0 or 1; "x" means "not in binary
For consideration. "
Digital addressable lighting interface - Part 208.
Particular requirements for the control device switching function
(Device type 7)
1 Scope
This section GB/T 30104 specifies the test methods and protocols for controlling the digital signal by the electronic control unit and its output only
The "turn-on/turn-off."
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 30104.101-2013 digital addressable lighting interface - Part 101. General requirements for systems (IEC 62386-101.
2009, IDT)
GB/T 30104.102-2013 digital addressable lighting interface - Part 102. General requirements for control devices (IEC 62386-
102.2009, IDT)
3 Terms and Definitions
GB/T 30104.101-2013 and GB/T 30104.102-2013 defined and the following terms and definitions apply to this document.
3.1
Virtual arc power level virtualarcpowerlevel
During the virtual dimming, calculated by the value obtained by the control device. It dimmable control device corresponds to the actual value.
3.2
Virtual dimming virtualdimming
Control means having an adjustable light control device in the same manner the arc power command features. It is based on an appropriate definition of the gradient meter
Operators virtual arc power level to provide a virtual dimming. Thus, when a virtual arc power level reaches or exceeds the threshold required to change output
status.
3.3
Uplink turn-on threshold upswitch-onthreshold
Its value is constantly being virtual arc power level than the right, once the virtual arc power level up to reach or exceed this level, the control device
The output is set to open.
3.4
Uplink shutdown threshold upswitch-offthreshold
Its value is constantly being virtual arc power level than the right, once the virtual arc power level up to reach or exceed this level, the control device
The output is set off.
3.5
Downward turn-on threshold downswitch-onthreshold
Its value is constantly being virtual arc power level than the right, once the virtual arc power level drops to or below this level, the control device
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30104.208-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30104.208-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30104.208-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30104.208-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|